[U-Boot] Please pull u-boot-fsl-qoriq
Tom Rini
trini at ti.com
Wed Sep 10 14:29:42 CEST 2014
On Mon, Sep 08, 2014 at 10:45:59AM -0700, York Sun wrote:
> Tom,
>
> This is the first pull request from u-boot-fsl-qoriq repository. In this set, I
> have v6 patches for Freescale Layerscape 1 SoC LS102xA with ARMv7 cores. These
> patches have been verified on the boards and compiled with the latest buildman
> "./tools/buildman/buildman -b u-boot-fsl-qoriq powerpc 'arm & freescale'".
>
> The following changes since commit d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6:
>
> Prepare v2014.10-rc2 (2014-09-02 16:58:29 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to b4ecc8c6f8c85d25f72933af23531728069a5b0f:
>
> ls102xa: dcu: Add platform support for DCU on LS1021ATWR board (2014-09-08
> 10:30:36 -0700)
>
> ----------------------------------------------------------------
> Alison Wang (2):
> net: mdio: Use mb() to be compatible for both ARM and PowerPC
> ls102xa: etsec: Add etsec support for LS102xA
>
> Claudiu Manoil (2):
> net: Merge asm/fsl_enet.h into fsl_mdio.h
> net: tsec: Remove tx snooping support from LS1
>
> Jingchang Lu (1):
> serial: lpuart: add 32-bit registers lpuart support
>
> Wang Huan (9):
> arm: ls102xa: Add Freescale LS102xA SoC support
> ls102xa: i2c: Add i2c support for LS102xA
> esdhc: Add CONFIG_SYS_FSL_ESDHC_LE and CONFIG_SYS_FSL_ESDHC_BE macros
> ls102xa: esdhc: Add esdhc support for LS102xA
> arm: ls102xa: Add basic support for LS1021AQDS board
> arm: ls102xa: Add basic support for LS1021ATWR board
> video: dcu: Add DCU driver support
> video: dcu: Add Sii9022A HDMI Transmitter support
> ls102xa: dcu: Add platform support for DCU on LS1021ATWR board
>
> York Sun (3):
> driver/ddr/freescale: Add support of accumulate ECC
> driver/ddr/freescale: Fix DDR3 driver for ARM
> driver/ddr/fsl: Add support of overriding chip select write leveling
>
> arch/arm/Kconfig | 8 +
> arch/arm/cpu/armv7/ls102xa/Makefile | 12 +
> arch/arm/cpu/armv7/ls102xa/clock.c | 130 ++++++
> arch/arm/cpu/armv7/ls102xa/cpu.c | 103 +++++
> arch/arm/cpu/armv7/ls102xa/fdt.c | 136 ++++++
> arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c | 120 +++++
> arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h | 12 +
> arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c | 41 ++
> arch/arm/cpu/armv7/ls102xa/timer.c | 127 ++++++
> arch/arm/include/asm/arch-ls102xa/clock.h | 23 +
> arch/arm/include/asm/arch-ls102xa/config.h | 78 ++++
> arch/arm/include/asm/arch-ls102xa/fsl_serdes.h | 33 ++
> arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 493 +++++++++++++++++++++
> arch/arm/include/asm/arch-ls102xa/imx-regs.h | 53 +++
> arch/arm/include/asm/config.h | 4 +
> arch/arm/include/asm/io.h | 8 +-
> arch/powerpc/include/asm/fsl_enet.h | 24 -
> board/freescale/common/Makefile | 2 +
> board/freescale/common/dcu_sii9022a.c | 153 +++++++
> board/freescale/common/dcu_sii9022a.h | 13 +
> board/freescale/ls1021aqds/Kconfig | 23 +
> board/freescale/ls1021aqds/MAINTAINERS | 6 +
> board/freescale/ls1021aqds/Makefile | 9 +
> board/freescale/ls1021aqds/README | 112 +++++
> board/freescale/ls1021aqds/ddr.c | 159 +++++++
> board/freescale/ls1021aqds/ddr.h | 49 ++
> board/freescale/ls1021aqds/eth.c | 186 ++++++++
> board/freescale/ls1021aqds/ls1021aqds.c | 255 +++++++++++
> board/freescale/ls1021aqds/ls1021aqds_qixis.h | 35 ++
> board/freescale/ls1021atwr/Kconfig | 23 +
> board/freescale/ls1021atwr/MAINTAINERS | 6 +
> board/freescale/ls1021atwr/Makefile | 8 +
> board/freescale/ls1021atwr/README | 109 +++++
> board/freescale/ls1021atwr/dcu.c | 47 ++
> board/freescale/ls1021atwr/ls1021atwr.c | 488 ++++++++++++++++++++
> board/freescale/mpc8360emds/mpc8360emds.c | 2 +-
> board/freescale/mpc837xemds/mpc837xemds.c | 1 -
> configs/ls1021aqds_nor_defconfig | 2 +
> configs/ls1021atwr_nor_defconfig | 2 +
> doc/README.fsl-esdhc | 5 +
> drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
> drivers/ddr/fsl/ctrl_regs.c | 8 +
> drivers/ddr/fsl/interactive.c | 2 +
> drivers/i2c/mxc_i2c.c | 4 +-
> drivers/mmc/fsl_esdhc.c | 4 +-
> drivers/net/fm/dtsec.c | 1 -
> drivers/net/fm/fm.h | 2 +-
> drivers/net/fm/init.c | 1 +
> drivers/net/fm/memac.c | 1 -
> drivers/net/fm/tgec.c | 1 -
> drivers/net/fsl_mdio.c | 10 +-
> drivers/net/tsec.c | 7 +
> drivers/qe/uec.h | 1 -
> drivers/serial/serial_lpuart.c | 118 +++++
> drivers/video/Makefile | 1 +
> drivers/video/fsl_dcu_fb.c | 365 +++++++++++++++
> drivers/watchdog/Makefile | 2 +-
> include/configs/ls1021aqds.h | 389 ++++++++++++++++
> include/configs/ls1021atwr.h | 291 ++++++++++++
> include/fm_eth.h | 2 +-
> include/fsl_dcu_fb.h | 16 +
> include/fsl_ddr_sdram.h | 2 +
> include/fsl_esdhc.h | 14 +-
> include/fsl_mdio.h | 13 +-
> include/tsec.h | 11 +-
> 65 files changed, 4322 insertions(+), 46 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/ls102xa/Makefile
> create mode 100644 arch/arm/cpu/armv7/ls102xa/clock.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/cpu.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/fdt.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
> create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/timer.c
> create mode 100644 arch/arm/include/asm/arch-ls102xa/clock.h
> create mode 100644 arch/arm/include/asm/arch-ls102xa/config.h
> create mode 100644 arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
> create mode 100644 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> create mode 100644 arch/arm/include/asm/arch-ls102xa/imx-regs.h
> delete mode 100644 arch/powerpc/include/asm/fsl_enet.h
> create mode 100644 board/freescale/common/dcu_sii9022a.c
> create mode 100644 board/freescale/common/dcu_sii9022a.h
> create mode 100644 board/freescale/ls1021aqds/Kconfig
> create mode 100644 board/freescale/ls1021aqds/MAINTAINERS
> create mode 100644 board/freescale/ls1021aqds/Makefile
> create mode 100644 board/freescale/ls1021aqds/README
> create mode 100644 board/freescale/ls1021aqds/ddr.c
> create mode 100644 board/freescale/ls1021aqds/ddr.h
> create mode 100644 board/freescale/ls1021aqds/eth.c
> create mode 100644 board/freescale/ls1021aqds/ls1021aqds.c
> create mode 100644 board/freescale/ls1021aqds/ls1021aqds_qixis.h
> create mode 100644 board/freescale/ls1021atwr/Kconfig
> create mode 100644 board/freescale/ls1021atwr/MAINTAINERS
> create mode 100644 board/freescale/ls1021atwr/Makefile
> create mode 100644 board/freescale/ls1021atwr/README
> create mode 100644 board/freescale/ls1021atwr/dcu.c
> create mode 100644 board/freescale/ls1021atwr/ls1021atwr.c
> create mode 100644 configs/ls1021aqds_nor_defconfig
> create mode 100644 configs/ls1021atwr_nor_defconfig
> create mode 100644 doc/README.fsl-esdhc
> create mode 100644 drivers/video/fsl_dcu_fb.c
> create mode 100644 include/configs/ls1021aqds.h
> create mode 100644 include/configs/ls1021atwr.h
> create mode 100644 include/fsl_dcu_fb.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140910/40f3a5be/attachment.pgp>
More information about the U-Boot
mailing list