[U-Boot] [PATCH v4 2/2] arm: vf610: add NAND support for vf610twr
Stefan Agner
stefan at agner.ch
Thu Sep 11 15:07:09 CEST 2014
This adds NAND support for the Vybrid tower system (TWR-VF65GS10)
provided by the vf610_nfc driver. Full 16-Bit bus width is
supported. Also an aditional config vf610twr_nand is introduced
which gets the environment from NAND. However, booting U-Boot from
NAND is not yet possible due to missing boot configuration block
(BCB).
Signed-off-by: Stefan Agner <stefan at agner.ch>
---
board/freescale/vf610twr/vf610twr.c | 47 ++++++++++++++++++++++++++++++++++---
configs/vf610twr_defconfig | 2 +-
configs/vf610twr_nand_defconfig | 3 +++
include/configs/vf610twr.h | 46 +++++++++++++++++++++++++++++++++++-
4 files changed, 93 insertions(+), 5 deletions(-)
create mode 100644 configs/vf610twr_nand_defconfig
diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c
index 54a9f2c..4d09796 100644
--- a/board/freescale/vf610twr/vf610twr.c
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -278,6 +278,39 @@ static void setup_iomux_i2c(void)
imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
}
+#ifdef CONFIG_NAND_VF610_NFC
+static void setup_iomux_nfc(void)
+{
+ static const iomux_v3_cfg_t nfc_pads[] = {
+ VF610_PAD_PTD31__NF_IO15,
+ VF610_PAD_PTD30__NF_IO14,
+ VF610_PAD_PTD29__NF_IO13,
+ VF610_PAD_PTD28__NF_IO12,
+ VF610_PAD_PTD27__NF_IO11,
+ VF610_PAD_PTD26__NF_IO10,
+ VF610_PAD_PTD25__NF_IO9,
+ VF610_PAD_PTD24__NF_IO8,
+ VF610_PAD_PTD23__NF_IO7,
+ VF610_PAD_PTD22__NF_IO6,
+ VF610_PAD_PTD21__NF_IO5,
+ VF610_PAD_PTD20__NF_IO4,
+ VF610_PAD_PTD19__NF_IO3,
+ VF610_PAD_PTD18__NF_IO2,
+ VF610_PAD_PTD17__NF_IO1,
+ VF610_PAD_PTD16__NF_IO0,
+ VF610_PAD_PTB24__NF_WE_B,
+ VF610_PAD_PTB25__NF_CE0_B,
+ VF610_PAD_PTB27__NF_RE_B,
+ VF610_PAD_PTC26__NF_RB_B,
+ VF610_PAD_PTC27__NF_ALE,
+ VF610_PAD_PTC28__NF_CLE
+ };
+
+ imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
+}
+#endif
+
+
static void setup_iomux_qspi(void)
{
static const iomux_v3_cfg_t qspi0_pads[] = {
@@ -354,6 +387,8 @@ static void clock_init(void)
CCM_CCGR7_SDHC1_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
+ CCM_CCGR10_NFC_CTRL_MASK);
clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
@@ -373,14 +408,17 @@ static void clock_init(void)
CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
CCM_CACRR_ARM_CLK_DIV(0));
clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
- CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3));
+ CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3) |
+ CCM_CSCMR1_NFC_CLK_SEL(0));
clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
CCM_CSCDR1_RMII_CLK_EN);
clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
- CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0));
+ CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
+ CCM_CSCDR2_NFC_EN);
clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) |
- CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3));
+ CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3) |
+ CCM_CSCDR3_NFC_PRE_DIV(5));
clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
CCM_CSCMR2_RMII_CLK_SEL(0));
}
@@ -411,6 +449,9 @@ int board_early_init_f(void)
setup_iomux_enet();
setup_iomux_i2c();
setup_iomux_qspi();
+#ifdef CONFIG_NAND_VF610_NFC
+ setup_iomux_nfc();
+#endif
return 0;
}
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index 10e6432..7de374a 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -1,3 +1,3 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
CONFIG_ARM=y
CONFIG_TARGET_VF610TWR=y
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
new file mode 100644
index 0000000..e78db26
--- /dev/null
+++ b/configs/vf610twr_nand_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_VF610TWR=y
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 0342550..6fd0b17 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -14,6 +14,7 @@
#define CONFIG_VF610
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -44,6 +45,41 @@
#undef CONFIG_CMD_IMLS
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_VF610_NFC
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
+
+/* UBI */
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define MTDIDS_DEFAULT "nand0=fsl_nfc"
+#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
+ "128k(vf-bcb)ro," \
+ "1408k(u-boot)ro," \
+ "512k(u-boot-env)," \
+ "4m(kernel)," \
+ "512k(fdt)," \
+ "-(rootfs)"
+#endif
+
#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
@@ -218,11 +254,19 @@
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE (64 * 2048)
+#define CONFIG_ENV_SECT_SIZE (64 * 2048)
+#define CONFIG_ENV_RANGE (512 * 1024)
+#define CONFIG_ENV_OFFSET 0x180000
+#endif
#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
--
2.1.0
More information about the U-Boot
mailing list