[U-Boot] [PATCH] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support

[Li Ye-B37916]

On 9/12/2014 4:17 PM, Stefano Babic wrote:
> Hi Ye,
>
> On 10/09/2014 07:52, Ye.Li wrote:
>> Initialize the Pfuze100 at board late init.
>>
>> Signed-off-by: Ye.Li <B37916 at freescale.com>
>> ---
>>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |   52 ++++++++++++++++++++++++-
>>  include/configs/mx6qsabreauto.h               |    6 +++
>>  2 files changed, 57 insertions(+), 1 deletions(-)
>>
>> diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
>> index bfb9b6a..76b024b 100644
>> --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
>> +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
>> @@ -1,5 +1,5 @@
>>  /*
>> - * Copyright (C) 2012 Freescale Semiconductor, Inc.
>> + * Copyright (C) 2012-2014 Freescale Semiconductor, Inc.
>>   *
>>   * Author: Fabio Estevam <fabio.estevam at freescale.com>
>>   *
>> @@ -23,6 +23,8 @@
>>  #include <netdev.h>
>>  #include <asm/arch/sys_proto.h>
>>  #include <i2c.h>
>> +#include <power/pmic.h>
>> +#include <power/pfuze100_pmic.h>
>>  
>>  DECLARE_GLOBAL_DATA_PTR;
>>  
>> @@ -43,6 +45,8 @@ DECLARE_GLOBAL_DATA_PTR;
>>  
>>  #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
>>  
>> +#define I2C_PMIC	1
>> +
>>  int dram_init(void)
>>  {
>>  	gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024;
>> @@ -259,6 +263,51 @@ int board_init(void)
>>  	return 0;
>>  }
>>  
>> +static int pfuze_init(void)
>> +{
>> +	struct pmic *p;
>> +	int ret;
>> +	unsigned int reg;
>> +
>> +	ret = power_pfuze100_init(I2C_PMIC);
>> +	if (ret)
>> +		return ret;
>> +
>> +	p = pmic_get("PFUZE100");
>> +	ret = pmic_probe(p);
>> +	if (ret)
>> +		return ret;
>> +
>> +	pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
>> +	printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);
>> +
>> +	/* Set SW1AB stanby volage to 0.975V */
>> +	pmic_reg_read(p, PFUZE100_SW1ABSTBY, &reg);
>> +	reg &= ~0x3f;
>> +	reg |= 0x1b;
>> +	pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
>> +
>> +	/* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
>> +	pmic_reg_read(p, PUZE_100_SW1ABCONF, &reg);
>> +	reg &= ~0xc0;
>> +	reg |= 0x40;
>> +	pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
>> +
>> +	/* Set SW1C standby voltage to 0.975V */
>> +	pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
>> +	reg &= ~0x3f;
>> +	reg |= 0x1b;
>> +	pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
>> +
>> +	/* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
>> +	pmic_reg_read(p, PFUZE100_SW1CCONF, &reg);
>> +	reg &= ~0xc0;
>> +	reg |= 0x40;
>> +	pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
>> +
>> +	return 0;
>> +}
> The initialization, with the exception of VGEN3/VGEN5, is identical to
> the sabresd. Any possibility to improve code and factorize the function
> for sabre* boards ?
>
> Best regards,
> Stefano Babic
>
Yes. The pfuze codes are similar on these boards. I will try to factorize the function. How about moving the common codes to "board/freescale/imx" ?

Best regards,
Ye Li