[U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir

[Fabio Estevam]

On Fri, Sep 12, 2014 at 4:53 AM, Stefano Babic <sbabic at denx.de> wrote:

> I try to sumarize the result of the discussion. This file was
> factorized, but it was proofed that calibration data are very board
> specific, and factorizing this file is not correct. I agree with Fabio
> and Eric that it is very unlike to have the same calibration data for
> different boards and the reuse of the same data is not correct.
>
> However, with this statement the patch should also unbind the congatec
> board from the sabresd, not only change the reference. A congatec
> specific board must be also created in congatec/cgtqmx6eval, and it is
> only a case that it has the same values of the sabresd.

Yes, this is a good approach.

Nitin,

Please send a v3 based on Stefano's suggestion.

Regards,

Fabio Estevam