[U-Boot] [PATCH 1/2] mx6sxsabresd: Staticize i2c_pad_info1

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

i2c_pad_info1 is only used locally, so it can be made static.

Fix the following sparse warning:

board/freescale/mx6sxsabresd/mx6sxsabresd.c:160:22: warning: symbol 'i2c_pad_info1' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 5eaec1b..68d3718 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -157,7 +157,7 @@ int board_eth_init(bd_t *bis)
 
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 /* I2C1 for PMIC */
-struct i2c_pads_info i2c_pad_info1 = {
+static struct i2c_pads_info i2c_pad_info1 = {
 	.scl = {
 		.i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC,
 		.gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC,
-- 
1.9.1