[U-Boot] [PATCH v2 08/16] exynos: Move common exynos settings into a common file
Simon Glass
sjg at chromium.org
Mon Sep 15 00:12:26 CEST 2014
Since exynos4 and exyno5 share many settings, we should move these into
a common file to avoid duplication.
In effect the changes are that all exynos boards now have EXT4 and FAT
write support. This affects exynos5250 and exynos5420 which previously
did not. This also disables the ext2 commands which are equivalent to
ext4 anyway.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Reduce the number of common elements to avoid needing #undefs later
include/configs/exynos-common.h | 93 +++++++++++++++++++++++++++++++++++++
include/configs/exynos4-common.h | 81 +-------------------------------
include/configs/exynos5-common.h | 90 +++++------------------------------
include/configs/origen.h | 3 --
include/configs/s5pc210_universal.h | 3 --
include/configs/smdk5250.h | 4 --
include/configs/snow.h | 4 --
include/configs/trats.h | 4 --
include/configs/trats2.h | 4 --
9 files changed, 107 insertions(+), 179 deletions(-)
create mode 100644 include/configs/exynos-common.h
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
new file mode 100644
index 0000000..0308b88
--- /dev/null
+++ b/include/configs/exynos-common.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Common configuration settings for the SAMSUNG EXYNOS boards.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __EXYNOS_COMMON_H
+#define __EXYNOS_COMMON_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_COMMON
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* Enable fdt support */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_OF_LIBFDT
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_CMD_CACHE
+
+/* input clock of PLL: 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_ENV_OVERWRITE
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
+
+/* select serial console configuration */
+#define CONFIG_BAUDRATE 115200
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_S5P_SDHCI
+#define CONFIG_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* PWM */
+#define CONFIG_PWM
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h
index ef0df9c..972add4 100644
--- a/include/configs/exynos4-common.h
+++ b/include/configs/exynos4-common.h
@@ -9,85 +9,29 @@
#ifndef __CONFIG_EXYNOS4_COMMON_H
#define __CONFIG_EXYNOS4_COMMON_H
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS4 /* which is in a Exynos4 Family */
+#define CONFIG_EXYNOS4 /* Exynos4 Family */
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_COMMON
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Enable fdt support */
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
+#include "exynos-common.h"
#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/* input clock of PLL: EXYNOS4 boards have 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
#define CONFIG_REVISION_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-#include <linux/sizes.h>
/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_S5P_SDHCI
-#define CONFIG_SDHCI
#define CONFIG_MMC_SDMA
-#define CONFIG_DWMMC
-#define CONFIG_EXYNOS_DWMMC
-#define CONFIG_BOUNCE_BUFFER
#define CONFIG_MMC_DEFAULT_DEV 0
-/* PWM */
-#define CONFIG_PWM
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_MISC
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_XIMG
-#undef CONFIG_CMD_CACHE
#undef CONFIG_CMD_ONENAND
#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_DFU
#define CONFIG_CMD_GPT
#define CONFIG_CMD_PMIC
#define CONFIG_CMD_SETEXPR
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-/* FAT */
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-
-/* EXT4 */
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-
/* USB Composite download gadget - g_dnl */
#define CONFIG_USBDOWNLOAD_GADGET
@@ -109,26 +53,8 @@
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
#define CONFIG_G_DNL_MANUFACTURER "Samsung"
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED
@@ -137,7 +63,4 @@
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
#endif /* __CONFIG_EXYNOS4_COMMON_H */
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 91c0f00..380a46f 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -9,25 +9,14 @@
#ifndef __CONFIG_EXYNOS5_COMMON_H
#define __CONFIG_EXYNOS5_COMMON_H
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_COMMON
+#define CONFIG_EXYNOS5 /* Exynos5 Family */
+
+#include "exynos-common.h"
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_EXYNOS_SPL
-/* Enable fdt support for Exynos5250 */
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
-
/* Allow tracing to be enabled */
#define CONFIG_TRACE
#define CONFIG_CMD_TRACE
@@ -36,22 +25,11 @@
#define CONFIG_TRACE_EARLY
#define CONFIG_TRACE_EARLY_ADDR 0x50000000
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_CMD_CACHE
/* Enable ACE acceleration for SHA1 and SHA256 */
#define CONFIG_EXYNOS_ACE_SHA
#define CONFIG_SHA_HW_ACCEL
-/* input clock of PLL: SMDK5250 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
/* Power Down Modes */
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
@@ -63,13 +41,12 @@
#define INFORM2_OFFSET 0x808
#define INFORM3_OFFSET 0x80c
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
-
/* select serial console configuration */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
#define CONFIG_SILENT_CONSOLE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
/* Enable keyboard */
#define CONFIG_CROS_EC /* CROS_EC protocol */
@@ -78,8 +55,6 @@
#define CONFIG_KEYBOARD
/* Console configuration */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define EXYNOS_DEVICE_SETTINGS \
"stdin=serial,cros-ec-keyb\0" \
"stdout=serial,lcd\0" \
@@ -88,39 +63,11 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
-#define CONFIG_DWMMC
-#define CONFIG_EXYNOS_DWMMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* PWM */
-#define CONFIG_PWM
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_PING
#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_NET
#define CONFIG_CMD_HASH
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
/* Thermal Management Unit */
#define CONFIG_EXYNOS_TMU
#define CONFIG_CMD_DTT
@@ -135,6 +82,7 @@
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
+#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
@@ -143,14 +91,8 @@
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
@@ -177,10 +119,6 @@
#define CONFIG_SYS_MONITOR_BASE 0x00000000
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
-
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SECURE_BL1_ONLY
@@ -213,11 +151,6 @@
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
/* I2C */
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_SYS_I2C
@@ -271,9 +204,6 @@
#define CONFIG_MENU
#endif
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
/* SHA hashing */
#define CONFIG_CMD_HASH
#define CONFIG_HASH_VERIFY
@@ -293,4 +223,8 @@
#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
+/* Enable FIT support and comparison */
+#define CONFIG_FIT
+#define CONFIG_FIT_BEST_MATCH
+
#endif /* __CONFIG_EXYNOS5_COMMON_H */
diff --git a/include/configs/origen.h b/include/configs/origen.h
index 469183e..e24d5b6 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -37,9 +37,6 @@
#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 066fc02..cd4cdfe 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -29,9 +29,6 @@
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 751b5eb..37dc092 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -14,8 +14,4 @@
#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
-
#endif /* __CONFIG_SMDK_H */
diff --git a/include/configs/snow.h b/include/configs/snow.h
index 78adca8..58b011d 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -14,8 +14,4 @@
#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
-
#endif /* __CONFIG_SNOW_H */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index ec9cf6f..80ab96c 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -41,10 +41,6 @@
#define CONFIG_SYS_TEXT_BASE 0x63300000
-#include <linux/sizes.h>
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index b3ad718..998dabf 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -38,10 +38,6 @@
#define CONFIG_SYS_TEXT_BASE 0x43e00000
-#include <linux/sizes.h>
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list