[U-Boot] [PATCH 09/10] dm: imx: serial: Support driver model in the MXC serial driver
Simon Glass
sjg at chromium.org
Mon Sep 15 14:57:44 CEST 2014
Add driver model support with this driver. Boards which use this driver
should define platform data in their board files.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
drivers/serial/serial_mxc.c | 170 +++++++++++++++++++++++++++++++++++++-------
include/serial_mxc.h | 14 ++++
2 files changed, 159 insertions(+), 25 deletions(-)
create mode 100644 include/serial_mxc.h
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 313d560..9ce24f9 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -5,37 +5,15 @@
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <serial_mxc.h>
#include <watchdog.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <serial.h>
#include <linux/compiler.h>
-#define __REG(x) (*((volatile u32 *)(x)))
-
-#ifndef CONFIG_MXC_UART_BASE
-#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver"
-#endif
-
-#define UART_PHYS CONFIG_MXC_UART_BASE
-
-/* Register definitions */
-#define URXD 0x0 /* Receiver Register */
-#define UTXD 0x40 /* Transmitter Register */
-#define UCR1 0x80 /* Control Register 1 */
-#define UCR2 0x84 /* Control Register 2 */
-#define UCR3 0x88 /* Control Register 3 */
-#define UCR4 0x8c /* Control Register 4 */
-#define UFCR 0x90 /* FIFO Control Register */
-#define USR1 0x94 /* Status Register 1 */
-#define USR2 0x98 /* Status Register 2 */
-#define UESC 0x9c /* Escape Character Register */
-#define UTIM 0xa0 /* Escape Timer Register */
-#define UBIR 0xa4 /* BRM Incremental Register */
-#define UBMR 0xa8 /* BRM Modulator Register */
-#define UBRC 0xac /* Baud Rate Count Register */
-#define UTS 0xb4 /* UART Test Register (mx31) */
-
/* UART Control Register Bit Fields.*/
#define URXD_CHARRDY (1<<15)
#define URXD_ERR (1<<14)
@@ -128,6 +106,33 @@
#define UTS_RXFULL (1<<3) /* RxFIFO full */
#define UTS_SOFTRST (1<<0) /* Software reset */
+#ifndef CONFIG_DM_SERIAL
+
+#ifndef CONFIG_MXC_UART_BASE
+#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver"
+#endif
+
+#define UART_PHYS CONFIG_MXC_UART_BASE
+
+#define __REG(x) (*((volatile u32 *)(x)))
+
+/* Register definitions */
+#define URXD 0x0 /* Receiver Register */
+#define UTXD 0x40 /* Transmitter Register */
+#define UCR1 0x80 /* Control Register 1 */
+#define UCR2 0x84 /* Control Register 2 */
+#define UCR3 0x88 /* Control Register 3 */
+#define UCR4 0x8c /* Control Register 4 */
+#define UFCR 0x90 /* FIFO Control Register */
+#define USR1 0x94 /* Status Register 1 */
+#define USR2 0x98 /* Status Register 2 */
+#define UESC 0x9c /* Escape Character Register */
+#define UTIM 0xa0 /* Escape Timer Register */
+#define UBIR 0xa4 /* BRM Incremental Register */
+#define UBMR 0xa8 /* BRM Modulator Register */
+#define UBRC 0xac /* Baud Rate Count Register */
+#define UTS 0xb4 /* UART Test Register (mx31) */
+
DECLARE_GLOBAL_DATA_PTR;
static void mxc_serial_setbrg(void)
@@ -222,3 +227,118 @@ __weak struct serial_device *default_serial_console(void)
{
return &mxc_serial_drv;
}
+#endif
+
+#ifdef CONFIG_DM_SERIAL
+
+struct mxc_uart {
+ u32 rxd;
+ u32 spare0[15];
+
+ u32 txd;
+ u32 spare1[15];
+
+ u32 cr1;
+ u32 cr2;
+ u32 cr3;
+ u32 cr4;
+
+ u32 fcr;
+ u32 sr1;
+ u32 sr2;
+ u32 esc;
+
+ u32 tim;
+ u32 bir;
+ u32 bmr;
+ u32 brc;
+
+ u32 onems;
+ u32 ts;
+};
+
+int mxc_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct mxc_serial_platdata *plat = dev->platdata;
+ struct mxc_uart *const uart = plat->reg;
+ u32 clk = imx_get_uartclk();
+
+ writel(4 << 7, &uart->fcr); /* divide input clock by 2 */
+ writel(0xf, &uart->bir);
+ writel(clk / (2 * baudrate), &uart->bmr);
+
+ writel(UCR2_WS | UCR2_IRTS | UCR2_RXEN | UCR2_TXEN | UCR2_SRST,
+ &uart->cr2);
+ writel(UCR1_UARTEN, &uart->cr1);
+
+ return 0;
+}
+
+static int mxc_serial_probe(struct udevice *dev)
+{
+ struct mxc_serial_platdata *plat = dev->platdata;
+ struct mxc_uart *const uart = plat->reg;
+
+ writel(0, &uart->cr1);
+ writel(0, &uart->cr2);
+ while (!(readl(&uart->cr2) & UCR2_SRST));
+ writel(0x704 | UCR3_ADNIMP, &uart->cr3);
+ writel(0x8000, &uart->cr4);
+ writel(0x2b, &uart->esc);
+ writel(0, &uart->tim);
+ writel(0, &uart->ts);
+
+ return 0;
+}
+
+static int mxc_serial_getc(struct udevice *dev)
+{
+ struct mxc_serial_platdata *plat = dev->platdata;
+ struct mxc_uart *const uart = plat->reg;
+
+ if (readl(&uart->ts) & UTS_RXEMPTY)
+ return -EAGAIN;
+
+ return readl(&uart->rxd) & URXD_RX_DATA;
+}
+
+static int mxc_serial_putc(struct udevice *dev, const char ch)
+{
+ struct mxc_serial_platdata *plat = dev->platdata;
+ struct mxc_uart *const uart = plat->reg;
+
+ if (!(readl(&uart->ts) & UTS_TXEMPTY))
+ return -EAGAIN;
+
+ writel(ch, &uart->txd);
+
+ return 0;
+}
+
+static int mxc_serial_pending(struct udevice *dev, bool input)
+{
+ struct mxc_serial_platdata *plat = dev->platdata;
+ struct mxc_uart *const uart = plat->reg;
+ uint32_t sr2 = readl(&uart->sr2);
+
+ if (input)
+ return sr2 & USR2_RDR ? 1 : 0;
+ else
+ return sr2 & USR2_TXDC ? 0 : 1;
+}
+
+static const struct dm_serial_ops mxc_serial_ops = {
+ .putc = mxc_serial_putc,
+ .pending = mxc_serial_pending,
+ .getc = mxc_serial_getc,
+ .setbrg = mxc_serial_setbrg,
+};
+
+U_BOOT_DRIVER(serial_mxc) = {
+ .name = "serial_mxc",
+ .id = UCLASS_SERIAL,
+ .probe = mxc_serial_probe,
+ .ops = &mxc_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+#endif
diff --git a/include/serial_mxc.h b/include/serial_mxc.h
new file mode 100644
index 0000000..7d3ace2
--- /dev/null
+++ b/include/serial_mxc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __serial_mxc_h
+#define __serial_mxc_h
+
+/* Information about a serial port */
+struct mxc_serial_platdata {
+ struct mxc_uart *reg; /* address of registers in physical memory */
+};
+
+#endif
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list