[U-Boot] [PATCH v2 07/11] dm: imx: Add error checking to setup_i2c()
Simon Glass
sjg at chromium.org
Wed Sep 17 05:51:20 CEST 2014
Since this function can fail, check its return value.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Add new patch to add error checking to setup_i2c()
arch/arm/imx-common/i2c-mxv7.c | 24 ++++++++++++++++-----
arch/arm/include/asm/imx-common/mxc_i2c.h | 4 ++--
board/compulab/cm_fx6/cm_fx6.c | 35 +++++++++++++++++++++----------
3 files changed, 45 insertions(+), 18 deletions(-)
diff --git a/arch/arm/imx-common/i2c-mxv7.c b/arch/arm/imx-common/i2c-mxv7.c
index a580873..70cff5c 100644
--- a/arch/arm/imx-common/i2c-mxv7.c
+++ b/arch/arm/imx-common/i2c-mxv7.c
@@ -69,15 +69,29 @@ static void * const i2c_bases[] = {
};
/* i2c_index can be from 0 - 2 */
-void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
- struct i2c_pads_info *p)
+int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
+ struct i2c_pads_info *p)
{
+ int ret;
+
if (i2c_index >= ARRAY_SIZE(i2c_bases))
- return;
+ return -EINVAL;
/* Enable i2c clock */
- enable_i2c_clk(1, i2c_index);
+ ret = enable_i2c_clk(1, i2c_index);
+ if (ret)
+ goto err_clk;
+
/* Make sure bus is idle */
- force_idle_bus(p);
+ ret = force_idle_bus(p);
+ if (ret)
+ goto err_idle;
+
bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr,
force_idle_bus, p);
+
+ return 0;
+
+err_idle:
+err_clk:
+ return ret;
}
diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h
index 182c2f3..af86163 100644
--- a/arch/arm/include/asm/imx-common/mxc_i2c.h
+++ b/arch/arm/include/asm/imx-common/mxc_i2c.h
@@ -52,8 +52,8 @@ struct i2c_pads_info {
&mx6q_##name : &mx6s_##name
#endif
-void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
- struct i2c_pads_info *p);
+int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
+ struct i2c_pads_info *p);
void bus_i2c_init(void *base, int speed, int slave_addr,
int (*idle_bus_fn)(void *p), void *p);
int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index fdb8ebf..62c625a 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -69,7 +69,7 @@ static iomux_v3_cfg_t const sata_pads[] = {
IOMUX_PADS(PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
-static void cm_fx6_setup_issd(void)
+static int cm_fx6_setup_issd(void)
{
SETUP_IOMUX_PADS(sata_pads);
/* Make sure this gpio has logical 0 value */
@@ -79,14 +79,18 @@ static void cm_fx6_setup_issd(void)
cm_fx6_sata_power(0);
mdelay(250);
cm_fx6_sata_power(1);
+
+ return 0;
}
#define CM_FX6_SATA_INIT_RETRIES 10
int sata_initialize(void)
{
- int err, i;
+ int err, i, ret;
- cm_fx6_setup_issd();
+ ret = cm_fx6_setup_issd();
+ if (ret)
+ return ret;
for (i = 0; i < CM_FX6_SATA_INIT_RETRIES; i++) {
err = setup_sata();
if (err) {
@@ -141,14 +145,25 @@ I2C_PADS(i2c2_pads,
IMX_GPIO_NR(1, 6));
-static void cm_fx6_setup_i2c(void)
+static int cm_fx6_setup_i2c(void)
{
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, I2C_PADS_INFO(i2c0_pads));
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, I2C_PADS_INFO(i2c1_pads));
- setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, I2C_PADS_INFO(i2c2_pads));
+ int ret;
+
+ ret = setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f,
+ I2C_PADS_INFO(i2c0_pads));
+ if (!ret) {
+ ret = setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f,
+ I2C_PADS_INFO(i2c1_pads));
+ }
+ if (!ret) {
+ ret = setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f,
+ I2C_PADS_INFO(i2c2_pads));
+ }
+
+ return ret;
}
#else
-static void cm_fx6_setup_i2c(void) { }
+static int cm_fx6_setup_i2c(void) { return 0; }
#endif
#ifdef CONFIG_USB_EHCI_MX6
@@ -411,9 +426,7 @@ int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
cm_fx6_setup_gpmi_nand();
- cm_fx6_setup_i2c();
-
- return 0;
+ return cm_fx6_setup_i2c();
}
int checkboard(void)
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list