[U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot

[Ruchika Gupta]

By default, PAMU's (IOMMU) are enabled in case of secure boot.
Disable/bypass them , once the control reached the bootloader.

For non-secure boot, PAMU's are already bypassed in the default
SoC configuration

Signed-off-by: Ruchika Gupta <ruchika.gupta at freescale.com>
CC: York Sun <yorksun at freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c   | 6 +++++-
 arch/powerpc/include/asm/immap_85xx.h | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 21c3194..15a7771 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -424,7 +424,7 @@ ulong cpu_init_f(void)
 {
 	ulong flag = 0;
 	extern void m8560_cpm_reset (void);
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
+#if defined(CONFIG_SYS_DCSRBAR_PHYS) || defined(CONFIG_SECURE_BOOT)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 #if defined(CONFIG_SECURE_BOOT)
@@ -456,6 +456,10 @@ ulong cpu_init_f(void)
 #if defined(CONFIG_SYS_CPC_REINIT_F)
 	disable_cpc_sram();
 #endif
+
+	/* Put PAMU in bypass mode */
+	out_be32(&gur->pamubypenr, FSL_CORENET_PAMU_BYPASS);
+
 #endif
 
 #ifdef CONFIG_CPM2
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 88c1e08..0264523 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1912,6 +1912,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 	u8	res24[64];
 	u32	pblsr;		/* Preboot loader status */
 	u32	pamubypenr;	/* PAMU bypass enable */
+#define FSL_CORENET_PAMU_BYPASS		0xffff0000
 	u32	dmacr1;		/* DMA control */
 	u8	res25[4];
 	u32	gensr1;		/* General status */
-- 
1.8.1.4