[U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes

[Marek Vasut]

On Wednesday, September 17, 2014 at 01:29:15 PM, Chin Liang See wrote:
[...]
> A quick test from my side and result as below:
> 
> 1. SDRAM access is working where I can read and write to few spots. :)
> 
> SOCFPGA_CYCLONE5 # md 0
> 00000000: 00000000 aaaaaaaa aaaaaaaa aaaaaaaa    ................
> SOCFPGA_CYCLONE5 # mw 0 12345678 100
> SOCFPGA_CYCLONE5 # md 0
> 00000000: 12345678 12345678 12345678 12345678    xV4.xV4.xV4.xV4.
> SOCFPGA_CYCLONE5 # md 100000
> 00100000: eafffffd fbff4b3f fffffffe fdff33be    ....?K.......3..
> SOCFPGA_CYCLONE5 # mw 100000 23456789 100
> SOCFPGA_CYCLONE5 # md 100000
> 00100000: 23456789 23456789 23456789 23456789    .gE#.gE#.gE#.gE#
> SOCFPGA_CYCLONE5 #

What does that mean?

> 2. Ethernet seems not working for me.
> But I will look into this to find out any missing pieces.
> 
> SOCFPGA_CYCLONE5 # setenv ethaddr 02:11:22:33:44:55
> SOCFPGA_CYCLONE5 # dhcp
> Speed: 1000, full duplex
> BOOTP broadcast 1
> BOOTP broadcast 2
> BOOTP broadcast 3
> BOOTP broadcast 4
> BOOTP broadcast 5
> BOOTP broadcast 6
> BOOTP broadcast 7
> BOOTP broadcast 8
> BOOTP broadcast 9
> BOOTP broadcast 10
> BOOTP broadcast 11
> BOOTP broadcast 12
> BOOTP broadcast 13
> BOOTP broadcast 14
> BOOTP broadcast 15
> BOOTP broadcast 16
> BOOTP broadcast 17
> 
> Retry time exceeded; starting again

This is on the SoCDK, right ?

> 3. MMC is not enabled in SocFPGA.
> I recall there is a patch from Pavel.
> I believe its pending for v2 due to some comments.

This should be in the tree in fact. Is CONFIG_CMD_MMC defined ?