[U-Boot] [PATCH 1/2] cosmetic: replace MIN, MAX with min, max
Masahiro Yamada
yamada.m at jp.panasonic.com
Wed Sep 17 14:53:03 CEST 2014
The macro MIN, MAX is defined as the aliase of min, max,
respectively.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
arch/arm/cpu/arm1176/tnetv107x/clock.c | 2 +-
arch/arm/cpu/armv7/mx6/ddr.c | 40 +++++++++++++++++-----------------
arch/x86/lib/physmem.c | 4 ++--
board/freescale/common/ics307_clk.c | 2 +-
drivers/dma/fsl_dma.c | 2 +-
drivers/i2c/ihs_i2c.c | 4 ++--
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/serial/usbtty.c | 4 ++--
drivers/usb/gadget/designware_udc.c | 4 ++--
drivers/usb/gadget/ep0.c | 2 +-
drivers/usb/gadget/mpc8xx_udc.c | 4 ++--
drivers/usb/gadget/pxa27x_udc.c | 2 +-
fs/zfs/zfs.c | 6 ++---
13 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c
index 3708b6f..47c23bb 100644
--- a/arch/arm/cpu/arm1176/tnetv107x/clock.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c
@@ -362,7 +362,7 @@ static void init_pll(const struct pll_init_data *data)
pllctl_reg_write(data->pll, ctl, tmp);
mult = data->pll_freq / fpll;
- for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) {
+ for (mult = max(mult, 1); mult <= MAX_MULT; mult++) {
div = (fpll * mult) / data->pll_freq;
if (div < 1 || div > MAX_DIV)
continue;
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 1ab69f6..2bf3705 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -248,47 +248,47 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
switch (m->mem_speed) {
case 800:
- txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+ txp = DIV_ROUND_UP(max(3*clkper, 7500), clkper) - 1;
+ tcke = DIV_ROUND_UP(max(3*clkper, 7500), clkper) - 1;
if (m->pagesz == 1) {
tfaw = DIV_ROUND_UP(40000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 10000), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 10000), clkper) - 1;
}
break;
case 1066:
- txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+ txp = DIV_ROUND_UP(max(3*clkper, 7500), clkper) - 1;
+ tcke = DIV_ROUND_UP(max(3*clkper, 5625), clkper) - 1;
if (m->pagesz == 1) {
tfaw = DIV_ROUND_UP(37500, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 7500), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 10000), clkper) - 1;
}
break;
case 1333:
- txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+ txp = DIV_ROUND_UP(max(3*clkper, 6000), clkper) - 1;
+ tcke = DIV_ROUND_UP(max(3*clkper, 5625), clkper) - 1;
if (m->pagesz == 1) {
tfaw = DIV_ROUND_UP(30000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 6000), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(45000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 7500), clkper) - 1;
}
break;
case 1600:
- txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
- tcke = DIV_ROUND_UP(MAX(3*clkper, 5000), clkper) - 1;
+ txp = DIV_ROUND_UP(max(3*clkper, 6000), clkper) - 1;
+ tcke = DIV_ROUND_UP(max(3*clkper, 5000), clkper) - 1;
if (m->pagesz == 1) {
tfaw = DIV_ROUND_UP(30000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 6000), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(40000, clkper) - 1;
- trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ trrd = DIV_ROUND_UP(max(4*clkper, 7500), clkper) - 1;
}
break;
default:
@@ -296,9 +296,9 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
hang();
break;
}
- txpdll = DIV_ROUND_UP(MAX(10*clkper, 24000), clkper) - 1;
+ txpdll = DIV_ROUND_UP(max(10*clkper, 24000), clkper) - 1;
tcl = DIV_ROUND_UP(m->trcd, clkper/10) - 3;
- tcksre = DIV_ROUND_UP(MAX(5*clkper, 10000), clkper);
+ tcksre = DIV_ROUND_UP(max(5*clkper, 10000), clkper);
tcksrx = tcksre;
taonpd = DIV_ROUND_UP(2000, clkper) - 1;
taofpd = taonpd;
@@ -307,8 +307,8 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
trc = DIV_ROUND_UP(m->trcmin, clkper/10) - 1;
tras = DIV_ROUND_UP(m->trasmin, clkper/10) - 1;
twr = DIV_ROUND_UP(15000, clkper) - 1;
- tmrd = DIV_ROUND_UP(MAX(12*clkper, 15000), clkper) - 1;
- twtr = ROUND(MAX(4*clkper, 7500)/clkper, 1) - 1;
+ tmrd = DIV_ROUND_UP(max(12*clkper, 15000), clkper) - 1;
+ twtr = ROUND(max(4*clkper, 7500)/clkper, 1) - 1;
trtp = twtr;
CS0_END = ((4*i->cs_density) <= 120) ? (4*i->cs_density)+7 : 127;
debug("density:%d Gb (%d Gb per chip)\n", i->cs_density, m->density);
diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c
index 59b3fe9..b57b2c3 100644
--- a/arch/x86/lib/physmem.c
+++ b/arch/x86/lib/physmem.c
@@ -189,7 +189,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size)
/* Handle memory below 4GB. */
if (start <= max_addr) {
- phys_size_t low_size = MIN(max_addr + 1 - start, size);
+ phys_size_t low_size = min(max_addr + 1 - start, size);
void *start_ptr = (void *)(uintptr_t)start;
assert(((phys_addr_t)(uintptr_t)start) == start);
@@ -208,7 +208,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size)
/* Handle the first partial page. */
if (offset) {
phys_addr_t end =
- MIN(map_addr + LARGE_PAGE_SIZE, start + size);
+ min(map_addr + LARGE_PAGE_SIZE, start + size);
phys_size_t cur_size = end - start;
x86_phys_memset_page(map_addr, offset, c, cur_size);
size -= cur_size;
diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c
index 6789efb..e683be3 100644
--- a/board/freescale/common/ics307_clk.c
+++ b/board/freescale/common/ics307_clk.c
@@ -67,7 +67,7 @@ unsigned long ics307_sysclk_calculator(unsigned long out_freq)
continue;
/* Calculate the temp out frequency */
tmp_out = input_freq * 2 * vdw / (rdw * od * 1000);
- diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out);
+ diff = max(out_freq, tmp_out) - min(out_freq, tmp_out);
/*
* calculate the percent, the precision is 1/1000
* If greater than 1/1000, continue
diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c
index 45e49c7..7ef7f12 100644
--- a/drivers/dma/fsl_dma.c
+++ b/drivers/dma/fsl_dma.c
@@ -96,7 +96,7 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) {
uint xfer_size;
while (count) {
- xfer_size = MIN(FSL_DMA_MAX_SIZE, count);
+ xfer_size = min(FSL_DMA_MAX_SIZE, count);
out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF));
out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF));
diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c
index fe66ce2..19fbe59 100644
--- a/drivers/i2c/ihs_i2c.c
+++ b/drivers/i2c/ihs_i2c.c
@@ -84,7 +84,7 @@ static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus)
int shift = (alen-1) * 8;
while (alen) {
- int transfer = MIN(alen, 2);
+ int transfer = min(alen, 2);
uchar buf[2];
bool is_last = alen <= transfer;
@@ -113,7 +113,7 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr,
return 1;
while (len) {
- int transfer = MIN(len, 2);
+ int transfer = min(len, 2);
if (ihs_i2c_transfer(chip, buffer, transfer, read,
len <= transfer))
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 97d0389..2640607 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -610,7 +610,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
#endif
cfg->cfg.f_min = 400000;
- cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000);
+ cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000);
cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index b030526..7fb0b92 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -475,7 +475,7 @@ static void __usbtty_puts (const char *str, int len)
if (space) {
write_buffer (&usbtty_output);
- n = MIN (space, MIN (len, maxlen));
+ n = min(space, min(len, maxlen));
buf_push (&usbtty_output, str, n);
str += n;
@@ -882,7 +882,7 @@ static int write_buffer (circbuf_t * buf)
space_avail =
current_urb->buffer_length -
current_urb->actual_length;
- popnum = MIN (space_avail, buf->size);
+ popnum = min(space_avail, buf->size);
if (popnum == 0)
break;
diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c
index b7c1038..3559400 100644
--- a/drivers/usb/gadget/designware_udc.c
+++ b/drivers/usb/gadget/designware_udc.c
@@ -269,7 +269,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance
UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d",
urb->buffer, urb->buffer_length, urb->actual_length);
- last = MIN(urb->actual_length - endpoint->sent,
+ last = min(urb->actual_length - endpoint->sent,
endpoint->tx_packetSize);
if (last) {
@@ -285,7 +285,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance
align = ((ulong)cp % sizeof(int));
if (align)
- last = MIN(last, sizeof(int) - align);
+ last = min(last, sizeof(int) - align);
UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d",
endpoint->sent, endpoint->tx_packetSize, last);
diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c
index b321488..4ba2f3d 100644
--- a/drivers/usb/gadget/ep0.c
+++ b/drivers/usb/gadget/ep0.c
@@ -315,7 +315,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
/*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
if (max - urb->actual_length > 0) {
int length =
- MIN (report_descriptor->wLength,
+ min(report_descriptor->wLength,
max - urb->actual_length);
memcpy (urb->buffer + urb->actual_length,
&report_descriptor->bData[0], length);
diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c
index 7f72972..b3e178a 100644
--- a/drivers/usb/gadget/mpc8xx_udc.c
+++ b/drivers/usb/gadget/mpc8xx_udc.c
@@ -897,7 +897,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
pkt_len = urb->actual_length - epi->sent;
if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) {
- pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT);
+ pkt_len = min(epi->tx_packetSize, EP_MAX_PKT);
}
for (x = 0; x < pkt_len; x++) {
@@ -942,7 +942,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
/* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
epi->sent += pkt_len;
- epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize);
+ epi->last = min(urb->actual_length - epi->sent, epi->tx_packetSize);
TOGGLE_TX_PID (ep_ref[ep].pid);
if (epi->sent >= epi->tx_urb->actual_length) {
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 733558d..efd5c7f 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -65,7 +65,7 @@ static int udc_write_urb(struct usb_endpoint_instance *endpoint)
if (!urb || !urb->actual_length)
return -1;
- n = MIN(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
+ n = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
if (n <= 0)
return -1;
diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c
index 099d517..818d3d9 100644
--- a/fs/zfs/zfs.c
+++ b/fs/zfs/zfs.c
@@ -772,7 +772,7 @@ zap_leaf_array_equal(zap_leaf_phys_t *l, zfs_endian_t endian,
while (bseen < array_len) {
struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array;
- int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
+ int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft))
return 0;
@@ -794,7 +794,7 @@ zap_leaf_array_get(zap_leaf_phys_t *l, zfs_endian_t endian, int blksft,
while (bseen < array_len) {
struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array;
- int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
+ int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES);
if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft))
/* Don't use errno because this error is to be ignored. */
@@ -2118,7 +2118,7 @@ zfs_read(zfs_file_t file, char *buf, uint64_t len)
data->file_start = blkid * blksz;
data->file_end = data->file_start + blksz;
- movesize = MIN(length, data->file_end - (int) file->offset - red);
+ movesize = min(length, data->file_end - (int)file->offset - red);
memmove(buf, data->file_buf + file->offset + red
- data->file_start, movesize);
--
1.9.1
More information about the U-Boot
mailing list