[U-Boot] [PATCH v2 11/11] dm: imx: Move cm_fx6 to use driver model for serial and GPIO

[Igor Grinberg]

On 09/17/14 06:51, Simon Glass wrote:
> Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an
> example.
> 
> Signed-off-by: Simon Glass <sjg at chromium.org>

Thanks for doing this.
Acked-by: Igor Grinberg <grinberg at compulab.co.il>

> ---
> 
> Changes in v2:
> - Use the correct namespace for the platform data
> 
>  board/compulab/cm_fx6/cm_fx6.c | 10 ++++++++++
>  include/configs/cm_fx6.h       | 11 +++++++++++
>  2 files changed, 21 insertions(+)
> 
> diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
> index 10e31b6..d79cd5f 100644
> --- a/board/compulab/cm_fx6/cm_fx6.c
> +++ b/board/compulab/cm_fx6/cm_fx6.c
> @@ -9,11 +9,13 @@
>   */
>  
>  #include <common.h>
> +#include <dm.h>
>  #include <fsl_esdhc.h>
>  #include <miiphy.h>
>  #include <netdev.h>
>  #include <fdt_support.h>
>  #include <sata.h>
> +#include <serial_mxc.h>
>  #include <asm/arch/crm_regs.h>
>  #include <asm/arch/sys_proto.h>
>  #include <asm/arch/iomux.h>
> @@ -509,3 +511,11 @@ u32 get_board_rev(void)
>  	return cl_eeprom_get_board_rev();
>  }
>  
> +static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = {
> +	.reg = (struct mxc_uart *)UART4_BASE,
> +};
> +
> +U_BOOT_DEVICE(cm_fx6_serial) = {
> +	.name	= "serial_mxc",
> +	.platdata = &cm_fx6_mxc_serial_plat,
> +};
> diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
> index 10d02b4..1f55150 100644
> --- a/include/configs/cm_fx6.h
> +++ b/include/configs/cm_fx6.h
> @@ -21,6 +21,17 @@
>  #define CONFIG_MACH_TYPE		4273
>  #define CONFIG_SYS_HZ			1000
>  
> +#ifndef CONFIG_SPL_BUILD
> +#define CONFIG_DM
> +#define CONFIG_CMD_DM
> +
> +#define CONFIG_DM_GPIO
> +#define CONFIG_CMD_GPIO
> +
> +#define CONFIG_DM_SERIAL
> +#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
> +#endif
> +
>  /* Display information on boot */
>  #define CONFIG_DISPLAY_CPUINFO
>  #define CONFIG_DISPLAY_BOARDINFO
> 

-- 
Regards,
Igor.