[U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool

Albert ARIBAUD albert.u.boot at aribaud.net
Thu Sep 18 11:37:46 CEST 2014


Hi Alison,

On Thu, 18 Sep 2014 13:47:13 +0800, Alison Wang <b18965 at freescale.com>
wrote:

> For the pblimage tool, the SPL image is splitted into 64 byte chunks,
> and PBL needs a command for each piece. In current pblimage structure,
> the size of the SPL image should be a fixed value. Well, for LS102xA
> and some other ARM platforms, the size of the SPL image is changeable.
> So a new image spl/u-boot-spl-pbl-pad.bin is built, and the size of
> it is a fixed value "CONFIG_SPL_MAX_SIZE". Use it instead of
> spl/u-boot-spl.bin for LS102xA.
> 
> CONFIG_SPL_PBL_PAD is used to enable this function.
> 
> Signed-off-by: Alison Wang <alison.wang at freescale.com>
> ---

There is already a CONFIG_SPL_PAD_TO (see ./README). Can you not use
this?

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list