[U-Boot] [PATCH 22/51] arm: socfpga: misc: Add proper ethernet initialization
Marek Vasut
marex at denx.de
Sun Sep 21 14:58:30 CEST 2014
From: Pavel Machek <pavel at denx.de>
Add function to initialize the EMAC blocks upon board startup.
The preprocessor guards against building on SoCFPGA-VT and against
SPL build are not needed as those are handled implicitly via both
SPL framework and the socfpga_cyclone5.h config file, which will
not define CONFIG_DESIGNWARE_ETH if building for SoCFPGA-VT.
We cannot handle two EMAC ethernet blocks yet, therefore the ifdefs.
Once there is hardware using both EMAC blocks, this ifdef will have
to go.
Signed-off-by: Pavel Machek <pavel at denx.de>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Chin Liang See <clsee at altera.com>
Cc: Dinh Nguyen <dinguyen at altera.com>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>
Cc: Tom Rini <trini at ti.com>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Pavel Machek <pavel at denx.de>
---
arch/arm/cpu/armv7/socfpga/misc.c | 58 ++++++++++++++++------
arch/arm/include/asm/arch-socfpga/system_manager.h | 9 ++++
2 files changed, 52 insertions(+), 15 deletions(-)
diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c
index 71ee912..a23c8ed 100644
--- a/arch/arm/cpu/armv7/socfpga/misc.c
+++ b/arch/arm/cpu/armv7/socfpga/misc.c
@@ -9,15 +9,58 @@
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
DECLARE_GLOBAL_DATA_PTR;
+static struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0;
}
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_DESIGNWARE_ETH
+int cpu_eth_init(bd_t *bis)
+{
+#if CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS
+ const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
+#elif CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS
+ const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
+#else
+#error "Incorrect CONFIG_EMAC_BASE value!"
+#endif
+
+ /* Initialize EMAC. This needs to be done at least once per boot. */
+
+ /*
+ * Putting the EMAC controller to reset when configuring the PHY
+ * interface select at System Manager
+ */
+ socfpga_emac_reset(1);
+
+ /* Clearing emac0 PHY interface select to 0 */
+ clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
+ SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
+
+ /* configure to PHY interface select choosed */
+ setbits_le32(&sysmgr_regs->emacgrp_ctrl,
+ SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift);
+
+ /* Release the EMAC controller from reset */
+ socfpga_emac_reset(0);
+
+ /* initialize and register the emac */
+ return designware_initialize(CONFIG_EMAC_BASE,
+ CONFIG_PHY_INTERFACE_MODE);
+}
+#endif
+
#if defined(CONFIG_DISPLAY_CPUINFO)
/*
* Print CPU information
@@ -50,18 +93,3 @@ int misc_init_r(void)
return 0;
}
-
-
-/*
- * DesignWare Ethernet initialization
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) && !defined(CONFIG_SPL_BUILD)
- /* initialize and register the emac */
- return designware_initialize(CONFIG_EMAC_BASE,
- CONFIG_PHY_INTERFACE_MODE);
-#else
- return 0;
-#endif
-}
diff --git a/arch/arm/include/asm/arch-socfpga/system_manager.h b/arch/arm/include/asm/arch-socfpga/system_manager.h
index 90d2720..071ec4f 100644
--- a/arch/arm/include/asm/arch-socfpga/system_manager.h
+++ b/arch/arm/include/asm/arch-socfpga/system_manager.h
@@ -134,4 +134,13 @@ struct socfpga_system_manager {
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
+/* EMAC Group Bit definitions */
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
+
+#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB 0
+#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB 2
+#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x3
+
#endif /* _SYSTEM_MANAGER_H_ */
--
2.0.0
More information about the U-Boot
mailing list