[U-Boot] [U-boot] [Patch 4/5] net: keystone_net: increase MDIO clock frequency

Ivan Khoronzhuk ivan.khoronzhuk at ti.com
Mon Sep 22 14:44:25 CEST 2014


From: Vitaly Andrianov <vitalya at ti.com>

With MAC_PHY sgmii configuration, u-boot checks PHY link status before
sending each packet. Increasing MDIO frequency increases overall tftp
speed. We set it to maximum 2.5MHz.

Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---
 arch/arm/include/asm/ti-common/keystone_net.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/ti-common/keystone_net.h b/arch/arm/include/asm/ti-common/keystone_net.h
index 7769d7b..e56759d 100644
--- a/arch/arm/include/asm/ti-common/keystone_net.h
+++ b/arch/arm/include/asm/ti-common/keystone_net.h
@@ -51,7 +51,7 @@
 /* MDIO module input frequency */
 #define EMAC_MDIO_BUS_FREQ		(clk_get_rate(pass_pll_clk))
 /* MDIO clock output frequency */
-#define EMAC_MDIO_CLOCK_FREQ		1000000                /* 1.0 MHz */
+#define EMAC_MDIO_CLOCK_FREQ		2500000	/* 2.5 MHz */
 
 /* MII Status Register */
 #define MII_STATUS_REG			1
-- 
1.8.3.2



More information about the U-Boot mailing list