[U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena
Stefano Babic
sbabic at denx.de
Mon Sep 22 15:44:58 CEST 2014
Hi Marek,
On 21/09/2014 15:44, Marek Vasut wrote:
> Add support for the Kosagi Novena board. Currently supported are:
> - I2C busses
> - FEC Ethernet
> - MMC0, MMC1, Booting from MMC
> - SATA
> - USB ports
> - USB Ethernet
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
I am getting a lot of warnings from checkpatch. Maybe I am doing
something wrohg here today, can you please check on your side ? Thanks !
For example:
WARNING: please, no spaces at the start of a line
#368: FILE: board/kosagi/novena/novena.c:248:
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;$
WARNING: please, no spaces at the start of a line
#379: FILE: board/kosagi/novena/novena.c:259:
+ puts("Board: Novena 4x\n");$
I get this several times.
I think you can ignore this, better one line that splitting the link on two:
WARNING: line over 80 characters
#1165: FILE: include/configs/novena.h:80:
+ *
http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
Best regards,
Stefano Babic
> arch/arm/Kconfig | 4 +
> board/kosagi/novena/Kconfig | 23 ++
> board/kosagi/novena/Makefile | 11 +
> board/kosagi/novena/novena.c | 348 +++++++++++++++++++++++++
> board/kosagi/novena/novena_spl.c | 529 +++++++++++++++++++++++++++++++++++++++
> board/kosagi/novena/setup.cfg | 47 ++++
> configs/novena_defconfig | 4 +
> include/configs/imx6_spl.h | 2 +-
> include/configs/novena.h | 302 ++++++++++++++++++++++
> 9 files changed, 1270 insertions(+), 2 deletions(-)
> create mode 100644 board/kosagi/novena/Kconfig
> create mode 100644 board/kosagi/novena/Makefile
> create mode 100644 board/kosagi/novena/novena.c
> create mode 100644 board/kosagi/novena/novena_spl.c
> create mode 100644 board/kosagi/novena/setup.cfg
> create mode 100644 configs/novena_defconfig
> create mode 100644 include/configs/novena.h
>
> V2: - Drop the tegra_keyboard_init() comment altogether
> - Immediatelly return from the SD controller probe function on failure
> - Rename PFUZE100_PMIC to just PFUZE100
> - Fix the IMX OTP support with CMD_FUSE
> V3: - Zap rootpath builtin env variable
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 106aed9..4da1923 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -411,6 +411,9 @@ config TARGET_GW_VENTANA
> config TARGET_HUMMINGBOARD
> bool "Support hummingboard"
>
> +config TARGET_KOSAGI_NOVENA
> + bool "Support Kosagi Novena"
> +
> config TARGET_TQMA6
> bool "TQ Systems TQMa6 board"
>
> @@ -637,6 +640,7 @@ source "board/imx31_phycore/Kconfig"
> source "board/isee/igep0033/Kconfig"
> source "board/jornada/Kconfig"
> source "board/karo/tx25/Kconfig"
> +source "board/kosagi/novena/Kconfig"
> source "board/logicpd/imx27lite/Kconfig"
> source "board/logicpd/imx31_litekit/Kconfig"
> source "board/mpl/vcma9/Kconfig"
> diff --git a/board/kosagi/novena/Kconfig b/board/kosagi/novena/Kconfig
> new file mode 100644
> index 0000000..4e52be9
> --- /dev/null
> +++ b/board/kosagi/novena/Kconfig
> @@ -0,0 +1,23 @@
> +if TARGET_KOSAGI_NOVENA
> +
> +config SYS_CPU
> + string
> + default "armv7"
> +
> +config SYS_BOARD
> + string
> + default "novena"
> +
> +config SYS_VENDOR
> + string
> + default "kosagi"
> +
> +config SYS_SOC
> + string
> + default "mx6"
> +
> +config SYS_CONFIG_NAME
> + string
> + default "novena"
> +
> +endif
> diff --git a/board/kosagi/novena/Makefile b/board/kosagi/novena/Makefile
> new file mode 100644
> index 0000000..f67bbc9
> --- /dev/null
> +++ b/board/kosagi/novena/Makefile
> @@ -0,0 +1,11 @@
> +#
> +# Copyright (C) 2014 Marek Vasut <marex at denx.de>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +ifndef CONFIG_SPL_BUILD
> +obj-y := novena.o
> +else
> +obj-y := novena_spl.o
> +endif
> diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c
> new file mode 100644
> index 0000000..49f5428
> --- /dev/null
> +++ b/board/kosagi/novena/novena.c
> @@ -0,0 +1,348 @@
> +/*
> + * Novena board support
> + *
> + * Copyright (C) 2014 Marek Vasut <marex at denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/crm_regs.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/mxc_hdmi.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/imx-common/boot_mode.h>
> +#include <asm/imx-common/iomux-v3.h>
> +#include <asm/imx-common/mxc_i2c.h>
> +#include <asm/imx-common/sata.h>
> +#include <asm/imx-common/video.h>
> +#include <fsl_esdhc.h>
> +#include <i2c.h>
> +#include <input.h>
> +#include <ipu_pixfmt.h>
> +#include <linux/fb.h>
> +#include <linux/input.h>
> +#include <malloc.h>
> +#include <micrel.h>
> +#include <miiphy.h>
> +#include <mmc.h>
> +#include <netdev.h>
> +#include <power/pmic.h>
> +#include <power/pfuze100_pmic.h>
> +#include <stdio_dev.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define NOVENA_BUTTON_GPIO IMX_GPIO_NR(4, 14)
> +#define NOVENA_SD_CD IMX_GPIO_NR(1, 4)
> +#define NOVENA_USB_HUB_RESET IMX_GPIO_NR(7, 12)
> +
> +/*
> + * GPIO button
> + */
> +#ifdef CONFIG_KEYBOARD
> +static struct input_config button_input;
> +
> +static int novena_gpio_button_read_keys(struct input_config *input)
> +{
> + int key = KEY_ENTER;
> + if (gpio_get_value(NOVENA_BUTTON_GPIO))
> + return 0;
> + input_send_keycodes(&button_input, &key, 1);
> + return 1;
> +}
> +
> +static int novena_gpio_button_getc(struct stdio_dev *dev)
> +{
> + return input_getc(&button_input);
> +}
> +static int novena_gpio_button_tstc(struct stdio_dev *dev)
> +{
> + return input_tstc(&button_input);
> +}
> +
> +static int novena_gpio_button_init(struct stdio_dev *dev)
> +{
> + gpio_direction_input(NOVENA_BUTTON_GPIO);
> + input_set_delays(&button_input, 250, 250);
> + return 0;
> +}
> +
> +int drv_keyboard_init(void)
> +{
> + int error;
> + struct stdio_dev dev = {
> + .name = "button",
> + .flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM,
> + .start = novena_gpio_button_init,
> + .getc = novena_gpio_button_getc,
> + .tstc = novena_gpio_button_tstc,
> + };
> +
> + error = input_init(&button_input, 0);
> + if (error) {
> + debug("%s: Cannot set up input\n", __func__);
> + return -1;
> + }
> + button_input.read_keys = novena_gpio_button_read_keys;
> +
> + error = input_stdio_register(&dev);
> + if (error)
> + return error;
> +
> + return 0;
> +}
> +#endif
> +
> +/*
> + * SDHC
> + */
> +#ifdef CONFIG_FSL_ESDHC
> +static struct fsl_esdhc_cfg usdhc_cfg[] = {
> + { USDHC3_BASE_ADDR, 0, 4 }, /* Micro SD */
> + { USDHC2_BASE_ADDR, 0, 4 }, /* Big SD */
> +};
> +
> +int board_mmc_getcd(struct mmc *mmc)
> +{
> + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> +
> + /* There is no CD for a microSD card, assume always present. */
> + if (cfg->esdhc_base == USDHC3_BASE_ADDR)
> + return 1;
> + else
> + return !gpio_get_value(NOVENA_SD_CD);
> +}
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + s32 status = 0;
> + int index;
> +
> + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
> +
> + for (index = 0; index < ARRAY_SIZE(usdhc_cfg); index++) {
> + status = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
> + if (status)
> + return status;
> + }
> +
> + return status;
> +}
> +#endif
> +
> +/*
> + * USB
> + */
> +#ifdef CONFIG_USB_EHCI_MX6
> +int board_ehci_hcd_init(int port)
> +{
> + /* Reset USB hub */
> + if (port == 1) {
> + gpio_set_value(NOVENA_USB_HUB_RESET, 0);
> + mdelay(2);
> + gpio_set_value(NOVENA_USB_HUB_RESET, 1);
> + }
> + return 0;
> +}
> +#endif
> +
> +/*
> + * Video over HDMI
> + */
> +#if defined(CONFIG_VIDEO_IPUV3)
> +static void enable_hdmi(struct display_info_t const *dev)
> +{
> + imx_enable_hdmi_phy();
> +}
> +
> +struct display_info_t const displays[] = {
> + {
> + /* HDMI Output */
> + .bus = -1,
> + .addr = 0,
> + .pixfmt = IPU_PIX_FMT_RGB24,
> + .detect = detect_hdmi,
> + .enable = enable_hdmi,
> + .mode = {
> + .name = "HDMI",
> + .refresh = 60,
> + .xres = 1024,
> + .yres = 768,
> + .pixclock = 15385,
> + .left_margin = 220,
> + .right_margin = 40,
> + .upper_margin = 21,
> + .lower_margin = 7,
> + .hsync_len = 60,
> + .vsync_len = 10,
> + .sync = FB_SYNC_EXT,
> + .vmode = FB_VMODE_NONINTERLACED
> + }
> + }
> +};
> +
> +size_t display_count = ARRAY_SIZE(displays);
> +
> +static void setup_display(void)
> +{
> + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
> +
> + enable_ipu_clock();
> + imx_setup_hdmi();
> +
> + /* Turn on LDB0,IPU,IPU DI0 clocks */
> + setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
> +
> + /* set LDB0, LDB1 clk select to 011/011 */
> + clrsetbits_le32(&mxc_ccm->cs2cdr,
> + MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
> + MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK,
> + (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
> + (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET));
> +
> + setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
> +
> + setbits_le32(&mxc_ccm->chsccdr, CHSCCDR_CLK_SEL_LDB_DI0 <<
> + MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
> +
> + writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
> + IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH |
> + IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
> + IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
> + IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT |
> + IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
> + IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
> + IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED |
> + IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
> + &iomux->gpr[2]);
> +
> + clrsetbits_le32(&iomux->gpr[3], IOMUXC_GPR3_LVDS0_MUX_CTL_MASK,
> + IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
> + IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
> +}
> +#endif
> +
> +int board_early_init_f(void)
> +{
> +#if defined(CONFIG_VIDEO_IPUV3)
> + setup_display();
> +#endif
> +
> + /* Bring Ethernet PHY out of reset. */
> + gpio_set_value(IMX_GPIO_NR(3, 23), 1);
> +
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + /* address of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
> +
> +#ifdef CONFIG_CMD_SATA
> + setup_sata();
> +#endif
> +
> + return 0;
> +}
> +
> +int checkboard(void)
> +{
> + puts("Board: Novena 4x\n");
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->ram_size = imx_ddr_size();
> + return 0;
> +}
> +
> +/* setup board specific PMIC */
> +int power_init_board(void)
> +{
> + struct pmic *p;
> + u32 reg;
> + int ret;
> +
> + power_pfuze100_init(1);
> + p = pmic_get("PFUZE100");
> + if (!p)
> + return -EINVAL;
> +
> + ret = pmic_probe(p);
> + if (ret)
> + return ret;
> +
> + pmic_reg_read(p, PFUZE100_DEVICEID, ®);
> + printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
> +
> + /* Set VGEN1 to 1.5V and enable */
> + pmic_reg_read(p, PFUZE100_VGEN1VOL, ®);
> + reg &= ~(LDO_VOL_MASK);
> + reg |= (LDOA_1_50V | LDO_EN);
> + pmic_reg_write(p, PFUZE100_VGEN1VOL, reg);
> +
> + /* Set SWBST to 5.0V and enable (for USB) */
> + pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
> + reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
> + reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
> + pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
> +
> + return 0;
> +}
> +
> +/* EEPROM configuration data */
> +struct novena_eeprom_data {
> + uint8_t signature[6];
> + uint8_t version;
> + uint8_t reserved;
> + uint32_t serial;
> + uint8_t mac[6];
> + uint16_t features;
> +};
> +
> +int misc_init_r(void)
> +{
> + struct novena_eeprom_data data;
> + uchar *datap = (uchar *)&data;
> + const char *signature = "Novena";
> + int ret;
> +
> + /* If 'ethaddr' is already set, do nothing. */
> + if (getenv("ethaddr"))
> + return 0;
> +
> + /* EEPROM is at bus 2. */
> + ret = i2c_set_bus_num(2);
> + if (ret) {
> + puts("Cannot select EEPROM I2C bus.\n");
> + return 0;
> + }
> +
> + /* EEPROM is at address 0x56. */
> + ret = eeprom_read(0x56, 0, datap, sizeof(data));
> + if (ret) {
> + puts("Cannot read I2C EEPROM.\n");
> + return 0;
> + }
> +
> + /* Check EEPROM signature. */
> + if (memcmp(data.signature, signature, 6)) {
> + puts("Invalid I2C EEPROM signature.\n");
> + return 0;
> + }
> +
> + /* Set ethernet address from EEPROM. */
> + eth_setenv_enetaddr("ethaddr", data.mac);
> +
> + return ret;
> +}
> diff --git a/board/kosagi/novena/novena_spl.c b/board/kosagi/novena/novena_spl.c
> new file mode 100644
> index 0000000..cce2b0e
> --- /dev/null
> +++ b/board/kosagi/novena/novena_spl.c
> @@ -0,0 +1,529 @@
> +/*
> + * Novena SPL
> + *
> + * Copyright (C) 2014 Marek Vasut <marex at denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/mx6-ddr.h>
> +#include <asm/arch/mx6-pins.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/gpio.h>
> +#include <asm/imx-common/boot_mode.h>
> +#include <asm/imx-common/iomux-v3.h>
> +#include <asm/imx-common/mxc_i2c.h>
> +#include <i2c.h>
> +#include <mmc.h>
> +#include <fsl_esdhc.h>
> +#include <spl.h>
> +
> +#include <asm/arch/mx6-ddr.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define UART_PAD_CTRL \
> + (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
> + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> +
> +#define USDHC_PAD_CTRL \
> + (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
> + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
> +
> +#define ENET_PAD_CTRL \
> + (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
> + PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
> +
> +#define SPI_PAD_CTRL \
> + (PAD_CTL_HYS | \
> + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
> + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
> +
> +#define I2C_PAD_CTRL \
> + (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
> + PAD_CTL_DSE_240ohm | PAD_CTL_HYS | \
> + PAD_CTL_ODE)
> +
> +#define BUTTON_PAD_CTRL \
> + (PAD_CTL_PKE | PAD_CTL_PUE | \
> + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
> + PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
> +
> +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
> +
> +#define NOVENA_AUDIO_PWRON IMX_GPIO_NR(5, 17)
> +#define NOVENA_HDMI_GHOST_HPD IMX_GPIO_NR(5, 4)
> +#define NOVENA_PCIE_RESET_GPIO IMX_GPIO_NR(3, 29)
> +#define NOVENA_PCIE_POWER_ON_GPIO IMX_GPIO_NR(7, 12)
> +#define NOVENA_PCIE_WAKE_UP_GPIO IMX_GPIO_NR(3, 22)
> +#define NOVENA_PCIE_DISABLE_GPIO IMX_GPIO_NR(2, 16)
> +
> +/*
> + * Audio
> + */
> +static iomux_v3_cfg_t audio_pads[] = {
> + /* AUD_PWRON */
> + MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_audio(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(audio_pads, ARRAY_SIZE(audio_pads));
> + gpio_direction_output(NOVENA_AUDIO_PWRON, 1);
> +}
> +
> +/*
> + * ENET
> + */
> +static iomux_v3_cfg_t enet_pads1[] = {
> + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + /* pin 35 - 1 (PHY_AD2) on reset */
> + MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* pin 32 - 1 - (MODE0) all */
> + MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* pin 31 - 1 - (MODE1) all */
> + MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* pin 28 - 1 - (MODE2) all */
> + MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* pin 27 - 1 - (MODE3) all */
> + MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
> + MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* pin 42 PHY nRST */
> + MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static iomux_v3_cfg_t enet_pads2[] = {
> + MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
> + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_enet(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
> + imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
> +
> + gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
> + gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
> + gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
> + gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
> + gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
> + gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
> + gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
> +}
> +
> +/*
> + * GPIO Button
> + */
> +static iomux_v3_cfg_t button_pads[] = {
> + /* Debug */
> + MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_buttons(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(button_pads, ARRAY_SIZE(button_pads));
> +}
> +
> +/*
> + * I2C
> + */
> +/* I2C1, RAM */
> +struct i2c_pads_info i2c_pad_info0 = {
> + .scl = {
> + .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
> + .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
> + .gp = IMX_GPIO_NR(3, 21)
> + },
> + .sda = {
> + .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
> + .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
> + .gp = IMX_GPIO_NR(3, 28)
> + }
> +};
> +
> +/* I2C2 Camera, MIPI */
> +static struct i2c_pads_info i2c_pad_info1 = {
> + .scl = {
> + .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
> + .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
> + .gp = IMX_GPIO_NR(2, 30)
> + },
> + .sda = {
> + .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
> + .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
> + .gp = IMX_GPIO_NR(3, 16)
> + }
> +};
> +
> +/* I2C3, J15 - RGB connector */
> +static struct i2c_pads_info i2c_pad_info2 = {
> + .scl = {
> + .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
> + .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
> + .gp = IMX_GPIO_NR(3, 17)
> + },
> + .sda = {
> + .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
> + .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
> + .gp = IMX_GPIO_NR(3, 18)
> + }
> +};
> +
> +static void novena_spl_setup_iomux_i2c(void)
> +{
> + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
> + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
> + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
> +}
> +
> +/*
> + * PCI express
> + */
> +#ifdef CONFIG_CMD_PCI
> +static iomux_v3_cfg_t pcie_pads[] = {
> + /* "Reset" pin */
> + MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* "Power on" pin */
> + MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* "Wake up" pin (input) */
> + MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
> + /* "Disable endpoint" (rfkill) pin */
> + MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_pcie(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
> +
> + /* Ensure PCIe is powered down */
> + gpio_direction_output(NOVENA_PCIE_POWER_ON_GPIO, 0);
> +
> + /* Put the card into reset */
> + gpio_direction_output(NOVENA_PCIE_RESET_GPIO, 0);
> +
> + /* Input signal to wake system from mPCIe card */
> + gpio_direction_input(NOVENA_PCIE_WAKE_UP_GPIO);
> +
> + /* Drive RFKILL high, to ensure the radio is turned on */
> + gpio_direction_output(NOVENA_PCIE_DISABLE_GPIO, 1);
> +}
> +#else
> +static inline void novena_spl_setup_iomux_pcie(void) {}
> +#endif
> +
> +/*
> + * SDHC
> + */
> +static iomux_v3_cfg_t usdhc2_pads[] = {
> + MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
> +};
> +
> +static iomux_v3_cfg_t usdhc3_pads[] = {
> + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_sdhc(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
> + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
> +
> + /* Micro SD card detect */
> + gpio_direction_input(IMX_GPIO_NR(7, 0));
> +
> + /* Big SD card detect */
> + gpio_direction_input(IMX_GPIO_NR(1, 4));
> +}
> +
> +/*
> + * SPI
> + */
> +#ifdef CONFIG_MXC_SPI
> +static iomux_v3_cfg_t ecspi1_pads[] = {
> + /* SS1 */
> + MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(SPI_PAD_CTRL),
> + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
> + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
> + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_spi(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
> + gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
> +}
> +#else
> +static void novena_spl_setup_iomux_spi(void) {}
> +#endif
> +
> +/*
> + * UART
> + */
> +static iomux_v3_cfg_t const uart1_pads[] = {
> + MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> +};
> +
> +static iomux_v3_cfg_t const uart2_pads[] = {
> + MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> + MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_uart(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
> + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
> +}
> +
> +/*
> + * USB
> + */
> +#ifdef CONFIG_USB_EHCI_MX6
> +static iomux_v3_cfg_t usb_pads[] = {
> + MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_usb(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
> +}
> +#else
> +static void novena_spl_setup_iomux_usb(void) {}
> +#endif
> +
> +/*
> + * Video
> + */
> +#ifdef CONFIG_VIDEO
> +static iomux_v3_cfg_t hdmi_pads[] = {
> + /* "Ghost HPD" pin */
> + MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
> +};
> +
> +static void novena_spl_setup_iomux_video(void)
> +{
> + imx_iomux_v3_setup_multiple_pads(hdmi_pads, ARRAY_SIZE(hdmi_pads));
> + gpio_direction_input(NOVENA_HDMI_GHOST_HPD);
> +}
> +#else
> +static inline void novena_spl_setup_iomux_video(void) {}
> +#endif
> +
> +/*
> + * SPL boots from uSDHC card
> + */
> +#ifdef CONFIG_FSL_ESDHC
> +static struct fsl_esdhc_cfg usdhc_cfg = {
> + USDHC3_BASE_ADDR, 0, 4
> +};
> +
> +int board_mmc_getcd(struct mmc *mmc)
> +{
> + /* There is no CD for a microSD card, assume always present. */
> + return 1;
> +}
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
> + return fsl_esdhc_initialize(bis, &usdhc_cfg);
> +}
> +#endif
> +
> +/* Configure MX6Q/DUAL mmdc DDR io registers */
> +static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = {
> + /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
> + .dram_sdclk_0 = 0x00020038,
> + .dram_sdclk_1 = 0x00020038,
> + .dram_cas = 0x00000038,
> + .dram_ras = 0x00000038,
> + .dram_reset = 0x00000038,
> + /* SDCKE[0:1]: 100k pull-up */
> + .dram_sdcke0 = 0x00003000,
> + .dram_sdcke1 = 0x00003000,
> + /* SDBA2: pull-up disabled */
> + .dram_sdba2 = 0x00000000,
> + /* SDODT[0:1]: 100k pull-up, 40 ohm */
> + .dram_sdodt0 = 0x00000038,
> + .dram_sdodt1 = 0x00000038,
> + /* SDQS[0:7]: Differential input, 40 ohm */
> + .dram_sdqs0 = 0x00000038,
> + .dram_sdqs1 = 0x00000038,
> + .dram_sdqs2 = 0x00000038,
> + .dram_sdqs3 = 0x00000038,
> + .dram_sdqs4 = 0x00000038,
> + .dram_sdqs5 = 0x00000038,
> + .dram_sdqs6 = 0x00000038,
> + .dram_sdqs7 = 0x00000038,
> +
> + /* DQM[0:7]: Differential input, 40 ohm */
> + .dram_dqm0 = 0x00000038,
> + .dram_dqm1 = 0x00000038,
> + .dram_dqm2 = 0x00000038,
> + .dram_dqm3 = 0x00000038,
> + .dram_dqm4 = 0x00000038,
> + .dram_dqm5 = 0x00000038,
> + .dram_dqm6 = 0x00000038,
> + .dram_dqm7 = 0x00000038,
> +};
> +
> +/* Configure MX6Q/DUAL mmdc GRP io registers */
> +static struct mx6dq_iomux_grp_regs novena_grp_ioregs = {
> + /* DDR3 */
> + .grp_ddr_type = 0x000c0000,
> + .grp_ddrmode_ctl = 0x00020000,
> + /* Disable DDR pullups */
> + .grp_ddrpke = 0x00000000,
> + /* ADDR[00:16], SDBA[0:1]: 40 ohm */
> + .grp_addds = 0x00000038,
> + /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
> + .grp_ctlds = 0x00000038,
> + /* DATA[00:63]: Differential input, 40 ohm */
> + .grp_ddrmode = 0x00020000,
> + .grp_b0ds = 0x00000038,
> + .grp_b1ds = 0x00000038,
> + .grp_b2ds = 0x00000038,
> + .grp_b3ds = 0x00000038,
> + .grp_b4ds = 0x00000038,
> + .grp_b5ds = 0x00000038,
> + .grp_b6ds = 0x00000038,
> + .grp_b7ds = 0x00000038,
> +};
> +
> +static struct mx6_mmdc_calibration novena_mmdc_calib = {
> + /* write leveling calibration determine */
> + .p0_mpwldectrl0 = 0x00420048,
> + .p0_mpwldectrl1 = 0x006f0059,
> + .p1_mpwldectrl0 = 0x005a0104,
> + .p1_mpwldectrl1 = 0x01070113,
> + /* Read DQS Gating calibration */
> + .p0_mpdgctrl0 = 0x437c040b,
> + .p0_mpdgctrl1 = 0x0413040e,
> + .p1_mpdgctrl0 = 0x444f0446,
> + .p1_mpdgctrl1 = 0x044d0422,
> + /* Read Calibration: DQS delay relative to DQ read access */
> + .p0_mprddlctl = 0x4c424249,
> + .p1_mprddlctl = 0x4e48414f,
> + /* Write Calibration: DQ/DM delay relative to DQS write access */
> + .p0_mpwrdlctl = 0x42414641,
> + .p1_mpwrdlctl = 0x46374b43,
> +};
> +
> +static struct mx6_ddr_sysinfo novena_ddr_info = {
> + /* Width of data bus: 0=16, 1=32, 2=64 */
> + .dsize = 2,
> + /* Config for full 4GB range so that get_mem_size() works */
> + .cs_density = 32, /* 32Gb per CS */
> + /* Single chip select */
> + .ncs = 1,
> + .cs1_mirror = 0,
> + .rtt_wr = 1, /* RTT_Wr = RZQ/4 */
> + .rtt_nom = 2, /* RTT_Nom = RZQ/2 */
> + .walat = 3, /* Write additional latency */
> + .ralat = 7, /* Read additional latency */
> + .mif3_mode = 3, /* Command prediction working mode */
> + .bi_on = 1, /* Bank interleaving enabled */
> + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
> + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
> +};
> +
> +static struct mx6_ddr3_cfg elpida_4gib_1600 = {
> + .mem_speed = 1600,
> + .density = 4,
> + .width = 64,
> + .banks = 8,
> + .rowaddr = 16,
> + .coladdr = 10,
> + .pagesz = 2,
> + .trcd = 1300,
> + .trcmin = 4900,
> + .trasmin = 3590,
> +};
> +
> +/*
> + * called from C runtime startup code (arch/arm/lib/crt0.S:_main)
> + * - we have a stack and a place to store GD, both in SRAM
> + * - no variable global data is available
> + */
> +void board_init_f(ulong dummy)
> +{
> + /*
> + * Zero out global data:
> + * - this should be done by crt0.S
> + * - failure to zero it will cause i2c_setup to fail
> + */
> + memset((void *)gd, 0, sizeof(struct global_data));
> +
> + /* setup AIPS and disable watchdog */
> + arch_cpu_init();
> +
> + /* setup GP timer */
> + timer_init();
> +
> +#ifdef CONFIG_BOARD_POSTCLK_INIT
> + board_postclk_init();
> +#endif
> +#ifdef CONFIG_FSL_ESDHC
> + get_clocks();
> +#endif
> +
> + /* Setup IOMUX and configure basics. */
> + novena_spl_setup_iomux_audio();
> + novena_spl_setup_iomux_buttons();
> + novena_spl_setup_iomux_enet();
> + novena_spl_setup_iomux_i2c();
> + novena_spl_setup_iomux_pcie();
> + novena_spl_setup_iomux_sdhc();
> + novena_spl_setup_iomux_spi();
> + novena_spl_setup_iomux_uart();
> + novena_spl_setup_iomux_usb();
> + novena_spl_setup_iomux_video();
> +
> + /* UART clocks enabled and gd valid - init serial console */
> + preloader_console_init();
> +
> + /* Start the DDR DRAM */
> + mx6dq_dram_iocfg(64, &novena_ddr_ioregs, &novena_grp_ioregs);
> + mx6_dram_cfg(&novena_ddr_info, &novena_mmdc_calib, &elpida_4gib_1600);
> +
> + /* Clear the BSS. */
> + memset(__bss_start, 0, __bss_end - __bss_start);
> +
> + /* load/boot image from boot device */
> + board_init_r(NULL, 0);
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> +}
> diff --git a/board/kosagi/novena/setup.cfg b/board/kosagi/novena/setup.cfg
> new file mode 100644
> index 0000000..18d139c
> --- /dev/null
> +++ b/board/kosagi/novena/setup.cfg
> @@ -0,0 +1,47 @@
> +/*
> + * Copyright (C) 2014 Marek Vasut <marex at denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + *
> + * Refer docs/README.imxmage for more details about how-to configure
> + * and create imximage boot image
> + *
> + * The syntax is taken as close as possible with the kwbimage
> + */
> +
> +/* image version */
> +IMAGE_VERSION 2
> +
> +/* Boot Device : sd */
> +BOOT_FROM sd
> +
> +#define __ASSEMBLY__
> +#include <config.h>
> +#include "asm/arch/iomux.h"
> +#include "asm/arch/crm_regs.h"
> +
> +/* set the default clock gate to save power */
> +DATA 4, CCM_CCGR0, 0x00C03F3F
> +DATA 4, CCM_CCGR1, 0x0030FC03
> +DATA 4, CCM_CCGR2, 0x0FFFC000
> +DATA 4, CCM_CCGR3, 0x3FF00000
> +DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */
> +DATA 4, CCM_CCGR5, 0x0F0000C3
> +DATA 4, CCM_CCGR6, 0x000003FF
> +
> +/* enable AXI cache for VDOA/VPU/IPU */
> +DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
> +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
> +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
> +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
> +
> +/*
> + * Setup CCM_CCOSR register as follows:
> + *
> + * cko1_en = 1 --> CKO1 enabled
> + * cko1_div = 111 --> divide by 8
> + * cko1_sel = 1011 --> ahb_clk_root
> + *
> + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
> + */
> +DATA 4, CCM_CCOSR, 0x000000fb
> diff --git a/configs/novena_defconfig b/configs/novena_defconfig
> new file mode 100644
> index 0000000..a560afb
> --- /dev/null
> +++ b/configs/novena_defconfig
> @@ -0,0 +1,4 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/kosagi/novena/setup.cfg,MX6Q,SPL"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_TARGET_KOSAGI_NOVENA=y
> diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
> index 970460d..52fe9cf 100644
> --- a/include/configs/imx6_spl.h
> +++ b/include/configs/imx6_spl.h
> @@ -27,7 +27,7 @@
> #define CONFIG_SYS_THUMB_BUILD
> #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
> #define CONFIG_SPL_TEXT_BASE 0x00908000
> -#define CONFIG_SPL_MAX_SIZE (64 * 1024)
> +#define CONFIG_SPL_MAX_SIZE 0x10000
> #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7"
> #define CONFIG_SPL_STACK 0x0091FFB8
> #define CONFIG_SPL_LIBCOMMON_SUPPORT
> diff --git a/include/configs/novena.h b/include/configs/novena.h
> new file mode 100644
> index 0000000..af548e7
> --- /dev/null
> +++ b/include/configs/novena.h
> @@ -0,0 +1,302 @@
> +/*
> + * Configuration settings for the Novena U-boot.
> + *
> + * Copyright (C) 2014 Marek Vasut <marex at denx.de>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/* System configurations */
> +#define CONFIG_MX6
> +#define CONFIG_SYS_MX6_HCLK 24000000
> +#define CONFIG_SYS_MX6_CLK32 32768
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_MISC_INIT_R
> +#define CONFIG_DISPLAY_BOARDINFO
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_FAT_WRITE
> +#define CONFIG_FIT
> +#define CONFIG_KEYBOARD
> +#define CONFIG_MXC_GPIO
> +#define CONFIG_OF_LIBFDT
> +#define CONFIG_REGEX
> +#define CONFIG_SYS_GENERIC_BOARD
> +#define CONFIG_SYS_NO_FLASH
> +
> +#include "configs/mx6_common.h"
> +#include <asm/arch/imx-regs.h>
> +#include <asm/imx-common/gpio.h>
> +#include <config_cmd_default.h>
> +
> +/* U-Boot Commands */
> +#define CONFIG_CMD_ASKENV
> +#define CONFIG_CMD_BMODE
> +#define CONFIG_CMD_BOOTZ
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_EEPROM
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_FS_GENERIC
> +#define CONFIG_CMD_I2C
> +#define CONFIG_CMD_FUSE
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_PCI
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_SATA
> +#define CONFIG_CMD_SETEXPR
> +#define CONFIG_CMD_TIME
> +#define CONFIG_CMD_USB
> +#define CONFIG_VIDEO
> +
> +/* U-Boot general configurations */
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
> +#define CONFIG_SYS_PBSIZE \
> + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
> + /* Print buffer size */
> +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> + /* Boot argument buffer size */
> +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
> +#define CONFIG_AUTO_COMPLETE /* Command auto complete */
> +#define CONFIG_CMDLINE_EDITING /* Command history etc */
> +#define CONFIG_SYS_HUSH_PARSER
> +
> +/* U-Boot environment */
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_ENV_SIZE (16 * 1024)
> +/*
> + * Environment is on MMC, starting at offset 64KiB from start of the card.
> + * Please place first partition at offset 1MiB from the start of the card
> + * as recommended by GNU/fdisk. See below for details:
> + * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
> + */
> +#ifdef CONFIG_CMD_MMC
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_ENV_OFFSET (512 * 1024)
> +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
> +#define CONFIG_ENV_OFFSET_REDUND \
> + (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
> +#else
> +#define CONFIG_ENV_IS_NOWHERE
> +#endif
> +
> +/* Booting Linux */
> +#define CONFIG_BOOTDELAY 5
> +#define CONFIG_BOOTFILE "fitImage"
> +#define CONFIG_BOOTARGS "console=ttymxc1,115200 "
> +#define CONFIG_BOOTCOMMAND "run net_nfs"
> +#define CONFIG_LOADADDR 0x18000000
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +#define CONFIG_HOSTNAME novena
> +
> +/* Physical Memory Map */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
> +#define PHYS_SDRAM_SIZE 0xF0000000
> +
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
> +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
> +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> +#define CONFIG_SYS_MEMTEST_START 0x10000000
> +#define CONFIG_SYS_MEMTEST_END 0x20000000
> +
> +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
> +
> +/* SPL */
> +#define CONFIG_SPL_FAT_SUPPORT
> +#define CONFIG_SPL_MMC_SUPPORT
> +#include "imx6_spl.h" /* common IMX6 SPL configuration */
> +
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_REVISION_TAG
> +
> +/* Ethernet Configuration */
> +#ifdef CONFIG_CMD_NET
> +#define CONFIG_FEC_MXC
> +#define CONFIG_MII
> +#define IMX_FEC_BASE ENET_BASE_ADDR
> +#define CONFIG_FEC_XCV_TYPE RGMII
> +#define CONFIG_ETHPRIME "FEC"
> +#define CONFIG_FEC_MXC_PHYADDR 0x7
> +#define CONFIG_PHYLIB
> +#define CONFIG_PHY_MICREL
> +#define CONFIG_PHY_MICREL_KSZ9021
> +#define CONFIG_ARP_TIMEOUT 200UL
> +#endif
> +
> +/* I2C */
> +#define CONFIG_SYS_I2C
> +#define CONFIG_SYS_I2C_MXC
> +#define CONFIG_I2C_MULTI_BUS
> +#define CONFIG_I2C_MXC
> +#define CONFIG_SYS_I2C_SPEED 100000
> +
> +/* I2C EEPROM */
> +#ifdef CONFIG_CMD_EEPROM
> +#define CONFIG_SYS_I2C_MULTI_EEPROMS
> +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> +#define CONFIG_SYS_SPD_BUS_NUM 2
> +#endif
> +
> +/* MMC Configs */
> +#ifdef CONFIG_CMD_MMC
> +#define CONFIG_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_BOUNCE_BUFFER
> +#define CONFIG_FSL_ESDHC
> +#define CONFIG_FSL_USDHC
> +#define CONFIG_SYS_FSL_ESDHC_ADDR 0
> +#define CONFIG_SYS_FSL_USDHC_NUM 2
> +#endif
> +
> +/* OCOTP Configs */
> +#ifdef CONFIG_CMD_FUSE
> +#define CONFIG_MXC_OCOTP
> +#endif
> +
> +/* PCI express */
> +#undef CONFIG_CMD_PCI /* Disable to prevent Linux from hanging on MX6 */
> +#ifdef CONFIG_CMD_PCI
> +#define CONFIG_PCI
> +#define CONFIG_PCI_PNP
> +#define CONFIG_PCI_SCAN_SHOW
> +#define CONFIG_PCIE_IMX
> +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
> +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
> +#endif
> +
> +/* PMIC */
> +#define CONFIG_POWER
> +#define CONFIG_POWER_I2C
> +#define CONFIG_POWER_PFUZE100
> +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
> +
> +/* SATA Configs */
> +#ifdef CONFIG_CMD_SATA
> +#define CONFIG_DWC_AHSATA
> +#define CONFIG_SYS_SATA_MAX_DEVICE 1
> +#define CONFIG_DWC_AHSATA_PORT_ID 0
> +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
> +#define CONFIG_LBA48
> +#define CONFIG_LIBATA
> +#endif
> +
> +/* UART */
> +#define CONFIG_MXC_UART
> +#define CONFIG_MXC_UART_BASE UART2_BASE
> +#define CONFIG_BAUDRATE 115200
> +#define CONFIG_CONS_INDEX 1
> +
> +/* USB Configs */
> +#ifdef CONFIG_CMD_USB
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_MX6
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_USB_KEYBOARD
> +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_ASIX
> +#define CONFIG_USB_ETHER_SMSC95XX
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
> +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
> +#define CONFIG_MXC_USB_FLAGS 0
> +/* Gadget part */
> +#define CONFIG_CI_UDC
> +#define CONFIG_USBD_HS
> +#define CONFIG_USB_GADGET_DUALSPEED
> +#define CONFIG_USB_ETHER
> +#define CONFIG_USB_ETH_CDC
> +#define CONFIG_NETCONSOLE
> +#endif
> +
> +/* Video output */
> +#ifdef CONFIG_VIDEO
> +#define CONFIG_VIDEO
> +#define CONFIG_VIDEO_IPUV3
> +#define CONFIG_CFB_CONSOLE
> +#define CONFIG_VGA_AS_SINGLE_DEVICE
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> +#define CONFIG_VIDEO_BMP_RLE8
> +#define CONFIG_SPLASH_SCREEN
> +#define CONFIG_BMP_16BPP
> +#define CONFIG_VIDEO_LOGO
> +#define CONFIG_IPUV3_CLK 260000000
> +#define CONFIG_CMD_HDMIDETECT
> +#define CONFIG_CONSOLE_MUX
> +#define CONFIG_IMX_HDMI
> +#define CONFIG_IMX_VIDEO_SKIP
> +#endif
> +
> +/* Extra U-Boot environment. */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "fdt_high=0xffffffff\0" \
> + "initrd_high=0xffffffff\0" \
> + "consdev=ttymxc1\0" \
> + "baudrate=115200\0" \
> + "bootdev=/dev/mmcblk0p1\0" \
> + "rootdev=/dev/mmcblk0p2\0" \
> + "netdev=eth0\0" \
> + "kernel_addr_r=0x18000000\0" \
> + "addcons=" \
> + "setenv bootargs ${bootargs} " \
> + "console=${consdev},${baudrate}\0" \
> + "addip=" \
> + "setenv bootargs ${bootargs} " \
> + "ip=${ipaddr}:${serverip}:${gatewayip}:" \
> + "${netmask}:${hostname}:${netdev}:off\0" \
> + "addmisc=" \
> + "setenv bootargs ${bootargs} ${miscargs}\0" \
> + "addargs=run addcons addmisc\0" \
> + "mmcload=" \
> + "mmc rescan ; " \
> + "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
> + "netload=" \
> + "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
> + "miscargs=nohlt panic=1\0" \
> + "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
> + "nfsargs=" \
> + "setenv bootargs root=/dev/nfs rw " \
> + "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
> + "mmc_mmc=" \
> + "run mmcload mmcargs addargs ; " \
> + "bootm ${kernel_addr_r}\0" \
> + "mmc_nfs=" \
> + "run mmcload nfsargs addip addargs ; " \
> + "bootm ${kernel_addr_r}\0" \
> + "net_mmc=" \
> + "run netload mmcargs addargs ; " \
> + "bootm ${kernel_addr_r}\0" \
> + "net_nfs=" \
> + "run netload nfsargs addip addargs ; " \
> + "bootm ${kernel_addr_r}\0" \
> + "update_sd_spl_filename=SPL\0" \
> + "update_sd_uboot_filename=u-boot.img\0" \
> + "update_sd_firmware=" /* Update the SD firmware partition */ \
> + "if mmc rescan ; then " \
> + "if dhcp ${update_sd_spl_filename} ; then " \
> + "mmc write ${loadaddr} 2 0x200 ; " \
> + "fi ; " \
> + "if dhcp ${update_sd_uboot_filename} ; then " \
> + "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
> + "fi ; " \
> + "fi\0" \
> +
> +#endif /* __CONFIG_H */
>
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list