[U-Boot] [PATCH v6 0/4] Implement "fastboot flash" for eMMC
Steve Rae
srae at broadcom.com
Mon Sep 22 20:55:22 CEST 2014
Hi Tom,
On 14-08-26 11:47 AM, Steve Rae wrote:
> This series implements the "fastboot flash" command for eMMC devices.
> It supports both raw and sparse images.
>
> NOTES:
> - the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH
> - the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
> - (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
>
> This has been tested on ARMv7.
>
> ----
>
> This series depends on:
> http://patchwork.ozlabs.org/patch/382443/ (to 382446)
(which is now accepted)
>
> Changes in v6:
> - printf() to error()
> - fix spelling
> - remove excess braces
>
> Changes in v5:
> - use the common/aboot.c for the "sparse format" handling
>
> Changes in v4:
> - rearranged this patchset so that "sparse_format.h" can be dropped (if we cannot
> resolve the copyright/licensing issues)
> - update mmc_get_dev(...) to get_dev("mmc",....)
> - update printf() to puts() where applicable
> - update debug string as per feedback
> - rearranged "sparse format" support in this patchset, in order to isolate...
>
> Changes in v3:
> - remove most references to 'mmc',
> which leaves only one mmc specific function: mmc_get_dev()
>
> Changes in v2:
> - split large function into three
> - improved handling of response messages
> - additional partition size checking when writing sparse image
> - update README.android-fastboot file
> - new in v2
>
> Steve Rae (4):
> usb/gadget: fastboot: add eMMC support for flash command
> usb/gadget: fastboot: add support for flash command
> usb/gadget: fastboot: minor cleanup
> usb/gadget: fastboot: implement sparse format
>
> README | 10 +++++
> common/Makefile | 6 +++
> common/cmd_fastboot.c | 7 ++--
> common/fb_mmc.c | 92 +++++++++++++++++++++++++++++++++++++++++
> doc/README.android-fastboot | 5 ++-
> drivers/usb/gadget/f_fastboot.c | 44 ++++++++++++++++++--
> include/fb_mmc.h | 8 ++++
> 7 files changed, 163 insertions(+), 9 deletions(-)
> create mode 100644 common/fb_mmc.c
> create mode 100644 include/fb_mmc.h
>
I assume that because of all the churn with the "Android sparse image"
(BTW - thanks for accepting it...) it seems that this patchset got
incorrectly marked as superseded in "Patchwork". I have corrected its
status (to NEW).
Can this please be pulled ASAP! ?!?!?
Thanks in advance, Steve
More information about the U-Boot
mailing list