[U-Boot] [PATCH v3 11/15] config: Move arndale to use common exynos5250 file
Simon Glass
sjg at chromium.org
Tue Sep 23 20:59:33 CEST 2014
Most of the arndale features are common with other exynos5250 boards. To
permit easier addition of driver model support, use the common file.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v3: None
Changes in v2:
- Reduce the number of common elements to avoid needing #undefs later
include/configs/arndale.h | 197 +-----------------------------------
include/configs/exynos-common.h | 1 -
include/configs/exynos4-common.h | 2 +
include/configs/exynos5-common.h | 12 ---
include/configs/exynos5250-common.h | 5 -
include/configs/exynos5420-common.h | 14 +++
include/configs/peach-pit.h | 11 ++
include/configs/smdk5250.h | 19 ++++
include/configs/smdk5420.h | 3 +
include/configs/snow.h | 17 ++++
10 files changed, 67 insertions(+), 214 deletions(-)
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 75f9933..d1a26f1 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -9,111 +9,19 @@
#ifndef __CONFIG_ARNDALE_H
#define __CONFIG_ARNDALE_H
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
-#define CONFIG_EXYNOS5250
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
-
-/* Allow tracing to be enabled */
-#define CONFIG_TRACE
-#define CONFIG_CMD_TRACE
-#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
-#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
-#define CONFIG_TRACE_EARLY
-#define CONFIG_TRACE_EARLY_ADDR 0x50000000
-
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_TEXT_BASE 0x43E00000
-
-/* input clock of PLL: SMDK5250 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-/* Power Down Modes */
-#define S5P_CHECK_SLEEP 0x00000BAD
-#define S5P_CHECK_DIDLE 0xBAD00000
-#define S5P_CHECK_LPA 0xABAD0000
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET 0x800
-#define INFORM1_OFFSET 0x804
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
-
-/* select serial console configuration */
-#define CONFIG_BAUDRATE 115200
-#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
-#define CONFIG_SILENT_CONSOLE
-
-/* Console configuration */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define EXYNOS_DEVICE_SETTINGS \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- EXYNOS_DEVICE_SETTINGS
+#include "exynos5250-common.h"
/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
-#define CONFIG_DWMMC
-#define CONFIG_EXYNOS_DWMMC
#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
-
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* PWM */
-#define CONFIG_PWM
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-/* Command definition*/
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_HASH
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
/* USB */
-#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
-#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
@@ -121,106 +29,23 @@
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
-#define COPY_BL2_FNPTR_ADDR 0x02020030
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-
-/* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
-#define CONFIG_SPL_TEXT_BASE 0x02023400
-#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
-
-#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "ARNDALE # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
-#define CONFIG_RD_LVL
#define CONFIG_NR_DRAM_BANKS 8
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
-#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
-#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
#define CONFIG_IDENT_STRING " for ARNDALE"
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SECURE_BL1_ONLY
-
-/* Secure FW size configuration */
-#ifdef CONFIG_SECURE_BL1_ONLY
-#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
-#else
-#define CONFIG_SEC_FW_SIZE 0
-#endif
-
-/* Configuration of BL1, BL2, ENV Blocks on mmc */
-#define CONFIG_RES_BLOCK_SIZE (512)
-#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
-#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
-
-#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
-#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
-/* U-boot copy size from boot Media to DRAM.*/
-#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
-#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
-
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
-/* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
-#define CONFIG_I2C_EDID
-
/* PMIC */
#define CONFIG_PMIC
#define CONFIG_POWER_I2C
@@ -230,26 +55,6 @@
#define CONFIG_PREBOOT
-/* Ethernet Controllor Driver */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0x5000000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_ENV_SROM_BANK 1
-#endif /*CONFIG_CMD_NET*/
-
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
-/* Enable Time Command */
-#define CONFIG_CMD_TIME
-
#define CONFIG_S5P_PA_SYSRAM 0x02020000
#define CONFIG_SMP_PEN_ADDR CONFIG_S5P_PA_SYSRAM
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index 0308b88..1e0ceab 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -20,7 +20,6 @@
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_COMMON
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h
index 972add4..89ba14e 100644
--- a/include/configs/exynos4-common.h
+++ b/include/configs/exynos4-common.h
@@ -13,6 +13,8 @@
#include "exynos-common.h"
+#define CONFIG_BOARD_COMMON
+
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_REVISION_TAG
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 3581a38..ba591e7 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -14,7 +14,6 @@
#include "exynos-common.h"
#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_EXYNOS_SPL
/* Allow tracing to be enabled */
@@ -83,8 +82,6 @@
/* specific .lds file */
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
-/* Miscellaneous configurable options */
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
/* Boot Argument Buffer Size */
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
@@ -132,15 +129,10 @@
#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
-/* Store environment at the end of a 4 MB SPI flash */
-#define FLASH_SIZE (0x4 << 20)
-#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
-
/* U-boot copy size from boot Media to DRAM.*/
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-#define CONFIG_SPI_BOOTING
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
@@ -155,10 +147,6 @@
#define CONFIG_I2C_EDID
/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_ENV_SPI_BASE 0x12D30000
-
#ifdef CONFIG_SPI_FLASH
#define CONFIG_EXYNOS_SPI
#define CONFIG_CMD_SF
diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h
index 987eb15..713614f 100644
--- a/include/configs/exynos5250-common.h
+++ b/include/configs/exynos5250-common.h
@@ -24,8 +24,6 @@
/* USB */
#define CONFIG_CMD_USB
-#define CONFIG_USB_XHCI
-#define CONFIG_USB_XHCI_EXYNOS
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE
@@ -33,9 +31,6 @@
#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
-#define CONFIG_SYS_PROMPT "SMDK5250 # "
-#define CONFIG_IDENT_STRING " for SMDK5250"
-
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h
index 27e7edc..b0f940c 100644
--- a/include/configs/exynos5420-common.h
+++ b/include/configs/exynos5420-common.h
@@ -11,8 +11,17 @@
#define CONFIG_EXYNOS5420
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
+#define CONFIG_SPI_BOOTING
+
#include <configs/exynos5-common.h>
+#define CONFIG_ARCH_EARLY_INIT_R
+
#define MACH_TYPE_SMDK5420 8002
#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420
@@ -37,6 +46,8 @@
#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000"
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+
/*
* Put the initial stack pointer 1KB below this to allow room for the
* SPL marker. This value is arbitrary, but gd_t is placed starting here.
@@ -47,4 +58,7 @@
#define CONFIG_NR_DRAM_BANKS 7
#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
+/* Miscellaneous configurable options */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+
#endif /* __CONFIG_EXYNOS5420_H */
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index 6cf8c74..0bf9e53 100644
--- a/include/configs/peach-pit.h
+++ b/include/configs/peach-pit.h
@@ -9,9 +9,17 @@
#ifndef __CONFIG_PEACH_PIT_H
#define __CONFIG_PEACH_PIT_H
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
+
#include <configs/exynos5420-common.h>
#include <configs/exynos5-dt-common.h>
+#define CONFIG_BOARD_COMMON
+
#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-peach-pit
@@ -34,4 +42,7 @@
#define CONFIG_POWER_TPS65090_EC
#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_EXYNOS
+
#endif /* __CONFIG_PEACH_PIT_H */
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 37dc092..71d8480 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -9,9 +9,28 @@
#ifndef __CONFIG_SMDK_H
#define __CONFIG_SMDK_H
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
+#define CONFIG_SPI_BOOTING
+
#include <configs/exynos5250-common.h>
#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250
+#define CONFIG_BOARD_COMMON
+#define CONFIG_ARCH_EARLY_INIT_R
+
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_EXYNOS
+
+#define CONFIG_SYS_PROMPT "SMDK5250 # "
+#define CONFIG_IDENT_STRING " for SMDK5250"
+
+/* Miscellaneous configurable options */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+
#endif /* __CONFIG_SMDK_H */
diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h
index 2eaff21..56f3c02 100644
--- a/include/configs/smdk5420.h
+++ b/include/configs/smdk5420.h
@@ -11,6 +11,8 @@
#include <configs/exynos5420-common.h>
+#define CONFIG_BOARD_COMMON
+
#define CONFIG_SMDK5420 /* which is in a SMDK5420 */
#undef CONFIG_DEFAULT_DEVICE_TREE
@@ -21,5 +23,6 @@
#define CONFIG_SYS_PROMPT "SMDK5420 # "
#define CONFIG_IDENT_STRING " for SMDK5420"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#endif /* __CONFIG_SMDK5420_H */
diff --git a/include/configs/snow.h b/include/configs/snow.h
index 93a03b1..246e958 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -9,6 +9,13 @@
#ifndef __CONFIG_SNOW_H
#define __CONFIG_SNOW_H
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
+#define CONFIG_SPI_BOOTING
+
#include <configs/exynos5250-common.h>
#include <configs/exynos5-dt-common.h>
@@ -18,4 +25,14 @@
#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
#define CONFIG_POWER_TPS65090_I2C
+#define CONFIG_BOARD_COMMON
+#define CONFIG_ARCH_EARLY_INIT_R
+
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_EXYNOS
+
+#define CONFIG_SYS_PROMPT "snow # "
+#define CONFIG_IDENT_STRING " for snow"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+
#endif /* __CONFIG_SNOW_H */
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list