[U-Boot] [PATCH v2] usb: gadget: fastboot: improve download progress bar
Lukasz Majewski
l.majewski at samsung.com
Wed Sep 24 14:19:41 CEST 2014
Hi Bo,
> When download is ongoing, if the actual size of one transfer
> is not the same as BTYES_PER_DOT, which will cause the dot
> won't print anymore. Then it will let the user thinking it
> is stuck, actually it is transfering without dot printed.
>
> So, improve the method to show the progress bar (print dot).
Applied to u-boot-dfu tree
Thanks for support!
>
> Signed-off-by: Bo Shen <voice.shen at atmel.com>
> ---
> Changes in v2:
> - get rid of the global variable.
> - avoid the dot print after showing the total download length.
>
> drivers/usb/gadget/f_fastboot.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/gadget/f_fastboot.c
> b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..dda9d1c 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -380,6 +380,7 @@ static void rx_handler_dl_image(struct usb_ep
> *ep, struct usb_request *req) unsigned int transfer_size =
> download_size - download_bytes; const unsigned char *buffer =
> req->buf; unsigned int buffer_size = req->actual;
> + unsigned int pre_dot_num, now_dot_num;
>
> if (req->status != 0) {
> printf("Bad status: %d\n", req->status);
> @@ -392,7 +393,15 @@ static void rx_handler_dl_image(struct usb_ep
> *ep, struct usb_request *req) memcpy((void
> *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes, buffer,
> transfer_size);
> + pre_dot_num = download_bytes / BYTES_PER_DOT;
> download_bytes += transfer_size;
> + now_dot_num = download_bytes / BYTES_PER_DOT;
> +
> + if (pre_dot_num != now_dot_num) {
> + putc('.');
> + if (!(now_dot_num % 74))
> + putc('\n');
> + }
>
> /* Check if transfer is done */
> if (download_bytes >= download_size) {
> @@ -414,11 +423,6 @@ static void rx_handler_dl_image(struct usb_ep
> *ep, struct usb_request *req) req->length = ep->maxpacket;
> }
>
> - if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
> - putc('.');
> - if (!(download_bytes % (74 * BYTES_PER_DOT)))
> - putc('\n');
> - }
> req->actual = 0;
> usb_ep_queue(ep, req, 0);
> }
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list