[U-Boot] [PATCH 1/3][v2] crypto/fsl: Add command for encapsulating/decapsulating blobs

Ruchika Gupta ruchika.gupta at freescale.com
Thu Sep 25 17:34:17 CEST 2014


Freescale's SEC block has built-in Blob Protocol which provides
a method for protecting user-defined data across system power
cycles. SEC block protects data in a data structure called a Blob,
which provides both confidentiality and integrity protection.

Encapsulating data as a blob
Each time that the Blob Protocol is used to protect data, a
different randomly generated key is used to encrypt the data.
This random key is itself encrypted using a key which is derived
from SoC's non volatile secret key and a 16 bit Key identifier.
The resulting encrypted key along with encrypted data is called a blob.
The non volatile secure key is available for use only during secure boot.

During decapsulation, the reverse process is performed to get back
the original data.

Commands added
--------------
    blob enc - encapsulating data as a cryptgraphic blob
    blob dec - decapsulating cryptgraphic blob to get the data

Commands Syntax
---------------
	blob enc src dst len km

	Encapsulate and create blob of data $len bytes long
	at address $src and store the result at address $dst.
	$km is the 16 byte key modifier is also required for
	generation/use as key for cryptographic operation. Key
	modifier should be 16 byte long.

	blob dec src dst len km

	Decapsulate the  blob of data at address $src and
	store result of $len byte at addr $dst.
	$km is the 16 byte key modifier is also required for
	generation/use as key for cryptographic operation. Key
	modifier should be 16 byte long.

Signed-off-by: Ruchika Gupta <ruchika.gupta at freescale.com>
CC: York Sun <yorksun at freescale.com>
---
Changes from v1:
Removed inclusion of command from corenet_ds.h from this patch.
Command is added in the config files as part of next patch in this series

 common/Makefile               |   2 +
 common/cmd_blob.c             | 109 ++++++++++++++++++++++++++++++++++++
 drivers/crypto/fsl/Makefile   |   1 +
 drivers/crypto/fsl/fsl_blob.c |  61 ++++++++++++++++++++
 drivers/crypto/fsl/jobdesc.c  |  80 ++++++++++++++++++++++++++
 drivers/crypto/fsl/jobdesc.h  |  11 ++++
 drivers/crypto/fsl/jr.c       | 127 +++++++++++++++++++++++++++++++++++++++++-
 include/fsl_sec.h             |  34 ++++++++++-
 8 files changed, 423 insertions(+), 2 deletions(-)
 create mode 100644 common/cmd_blob.c
 create mode 100644 drivers/crypto/fsl/fsl_blob.c

diff --git a/common/Makefile b/common/Makefile
index aca0f7f..2c07636 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -264,4 +264,6 @@ obj-$(CONFIG_IO_TRACE) += iotrace.o
 obj-y += memsize.o
 obj-y += stdio.o
 
+obj-$(CONFIG_CMD_BLOB) += cmd_blob.o
+
 CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/common/cmd_blob.c b/common/cmd_blob.c
new file mode 100644
index 0000000..82ecaf0
--- /dev/null
+++ b/common/cmd_blob.c
@@ -0,0 +1,109 @@
+/*
+ *
+ * Command for encapsulating/decapsulating blob of memory.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <environment.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * blob_decap() - Decapsulate the data as a blob
+ * @key_mod:	- Pointer to key modifier/key
+ * @src:	- Address of data to be decapsulated
+ * @dst:	- Address of data to be decapsulated
+ * @len:	- Size of data to be decapsulated
+ *
+ * Returns zero on success,and negative on error.
+ */
+__weak int blob_decap(u8 *key_mod, u8 *src, u8 *dst, u32 len)
+{
+	return 0;
+}
+
+/**
+ * blob_encap() - Encapsulate the data as a blob
+ * @key_mod:	- Pointer to key modifier/key
+ * @src:	- Address of data to be encapsulated
+ * @dst:	- Address of data to be encapsulated
+ * @len:	- Size of data to be encapsulated
+ *
+ * Returns zero on success,and negative on error.
+ */
+__weak int blob_encap(u8 *key_mod, u8 *src, u8 *dst, u32 len)
+{
+	return 0;
+}
+
+/**
+ * do_blob() - Handle the "blob" command-line command
+ * @cmdtp:	Command data struct pointer
+ * @flag:	Command flag
+ * @argc:	Command-line argument count
+ * @argv:	Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_blob(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	uint32_t key_addr, src_addr, dst_addr, len;
+	uint8_t *km_ptr, *src_ptr, *dst_ptr;
+	int enc, ret = 0;
+
+	if (argc != 6)
+		return CMD_RET_USAGE;
+
+	if (!strncmp(argv[1], "enc", 3))
+		enc = 1;
+	else if (!strncmp(argv[1], "dec", 3))
+		enc = 0;
+	else
+		return CMD_RET_USAGE;
+
+	src_addr = simple_strtoul(argv[2], NULL, 16);
+	dst_addr = simple_strtoul(argv[3], NULL, 16);
+	len = simple_strtoul(argv[4], NULL, 16);
+	key_addr = simple_strtoul(argv[5], NULL, 16);
+
+	km_ptr = (uint8_t *)key_addr;
+	src_ptr = (uint8_t *)src_addr;
+	dst_ptr = (uint8_t *)dst_addr;
+
+	if (enc)
+		ret = blob_encap(km_ptr, src_ptr, dst_ptr, len);
+	else
+		ret = blob_decap(km_ptr, src_ptr, dst_ptr, len);
+
+	return ret;
+}
+
+/***************************************************/
+static char blob_help_text[] =
+	"enc src dst len km - Encapsulate and create blob of data\n"
+	"                          $len bytes long at address $src and\n"
+	"                          store the result at address $dst.\n"
+	"                          $km is the 16 byte key modifier\n"
+	"                          is also required for generation/use as\n"
+	"                          key for cryptographic operation. Key\n"
+	"                          modifier should be 16 byte long.\n"
+	"blob dec src dst len km - Decapsulate the  blob of data at address\n"
+	"                          $src and store result of $len byte at\n"
+	"                          addr $dst.\n"
+	"                          $km is the 16 byte key modifier\n"
+	"                          is also required for generation/use as\n"
+	"                          key for cryptographic operation. Key\n"
+	"                          modifier should be 16 byte long.\n";
+
+U_BOOT_CMD(
+	blob, 6, 1, do_blob,
+	"Blob encapsulation/decryption",
+	blob_help_text
+);
diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile
index 59d9651..cb13d2e 100644
--- a/drivers/crypto/fsl/Makefile
+++ b/drivers/crypto/fsl/Makefile
@@ -7,3 +7,4 @@
 #
 
 obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o
+obj-$(CONFIG_CMD_BLOB) += fsl_blob.o
diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c
new file mode 100644
index 0000000..bc01075
--- /dev/null
+++ b/drivers/crypto/fsl/fsl_blob.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include "jobdesc.h"
+#include "desc.h"
+#include "jr.h"
+
+int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
+{
+	int ret, i = 0;
+	u32 *desc;
+
+	printf("\nDecapsulating data to form blob\n");
+	desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE);
+	if (!desc) {
+		debug("Not enough memory for descriptor allocation\n");
+		return -1;
+	}
+
+	inline_cnstr_jobdesc_blob_decap(desc, key_mod, src, dst, len);
+
+	for (i = 0; i < 14; i++)
+		printf("%x\n", *(desc + i));
+	ret = run_descriptor_jr(desc);
+
+	if (ret)
+		printf("Error in Decapsulation %d\n", ret);
+
+	free(desc);
+	return ret;
+}
+
+int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
+{
+	int ret, i = 0;
+	u32 *desc;
+
+	printf("\nEncapsulating data to form blob\n");
+	desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE);
+	if (!desc) {
+		debug("Not enough memory for descriptor allocation\n");
+		return -1;
+	}
+
+	inline_cnstr_jobdesc_blob_encap(desc, key_mod, src, dst, len);
+	for (i = 0; i < 14; i++)
+		printf("%x\n", *(desc + i));
+	ret = run_descriptor_jr(desc);
+
+	if (ret)
+		printf("Error in Encapsulation %d\n", ret);
+
+	free(desc);
+	return ret;
+}
diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c
index cbe5c30..1386bae 100644
--- a/drivers/crypto/fsl/jobdesc.c
+++ b/drivers/crypto/fsl/jobdesc.c
@@ -12,6 +12,9 @@
 #include "desc_constr.h"
 #include "jobdesc.h"
 
+#define KEY_BLOB_SIZE			32
+#define MAC_SIZE			16
+
 void inline_cnstr_jobdesc_hash(uint32_t *desc,
 			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
 			  u32 alg_type, uint32_t alg_size, int sg_tbl)
@@ -43,3 +46,80 @@ void inline_cnstr_jobdesc_hash(uint32_t *desc,
 	append_store(desc, dma_addr_out, storelen,
 		     LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT);
 }
+
+void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr,
+				     uint8_t *plain_txt, uint8_t *enc_blob,
+				     uint32_t in_sz)
+{
+	dma_addr_t dma_addr_key_idnfr, dma_addr_in, dma_addr_out;
+	uint32_t key_sz = KEY_IDNFR_SZ_BYTES;
+	/* output blob will have 32 bytes key blob in beginning and
+	 * 16 byte HMAC identifier at end of data blob */
+	uint32_t out_sz = in_sz + KEY_BLOB_SIZE + MAC_SIZE;
+
+	dma_addr_key_idnfr = virt_to_phys((void *)key_idnfr);
+	dma_addr_in	= virt_to_phys((void *)plain_txt);
+	dma_addr_out	= virt_to_phys((void *)enc_blob);
+
+	init_job_desc(desc, 0);
+
+	append_key(desc, dma_addr_key_idnfr, key_sz, CLASS_2);
+
+	append_seq_in_ptr(desc, dma_addr_in, in_sz, 0);
+
+	append_seq_out_ptr(desc, dma_addr_out, out_sz, 0);
+
+	append_operation(desc, OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB);
+}
+
+void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr,
+				     uint8_t *enc_blob, uint8_t *plain_txt,
+				     uint32_t out_sz)
+{
+	dma_addr_t dma_addr_key_idnfr, dma_addr_in, dma_addr_out;
+	uint32_t key_sz = KEY_IDNFR_SZ_BYTES;
+	uint32_t in_sz = out_sz + KEY_BLOB_SIZE + MAC_SIZE;
+
+	dma_addr_key_idnfr = virt_to_phys((void *)key_idnfr);
+	dma_addr_in	= virt_to_phys((void *)enc_blob);
+	dma_addr_out	= virt_to_phys((void *)plain_txt);
+
+	init_job_desc(desc, 0);
+
+	append_key(desc, dma_addr_key_idnfr, key_sz, CLASS_2);
+
+	append_seq_in_ptr(desc, dma_addr_in, in_sz, 0);
+
+	append_seq_out_ptr(desc, dma_addr_out, out_sz, 0);
+
+	append_operation(desc, OP_TYPE_DECAP_PROTOCOL | OP_PCLID_BLOB);
+}
+
+/*
+ * Descriptor to instantiate RNG State Handle 0 in normal mode and
+ * load the JDKEK, TDKEK and TDSK registers
+ */
+void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc)
+{
+	u32 *jump_cmd;
+
+	init_job_desc(desc, 0);
+
+	/* INIT RNG in non-test mode */
+	append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+			 OP_ALG_AS_INIT);
+
+	/* wait for done */
+	jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
+	set_jump_tgt_here(desc, jump_cmd);
+
+	/*
+	 * load 1 to clear written reg:
+	 * resets the done interrrupt and returns the RNG to idle.
+	 */
+	append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+
+	/* generate secure keys (non-test) */
+	append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+			 OP_ALG_RNG4_SK);
+}
diff --git a/drivers/crypto/fsl/jobdesc.h b/drivers/crypto/fsl/jobdesc.h
index ed61579..3cf7226 100644
--- a/drivers/crypto/fsl/jobdesc.h
+++ b/drivers/crypto/fsl/jobdesc.h
@@ -11,8 +11,19 @@
 #include <common.h>
 #include <asm/io.h>
 
+#define KEY_IDNFR_SZ_BYTES		16
+
 void inline_cnstr_jobdesc_hash(uint32_t *desc,
 			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
 			  u32 alg_type, uint32_t alg_size, int sg_tbl);
 
+void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr,
+				     uint8_t *plain_txt, uint8_t *enc_blob,
+				     uint32_t in_sz);
+
+void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr,
+				     uint8_t *enc_blob, uint8_t *plain_txt,
+				     uint32_t out_sz);
+
+void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc);
 #endif
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index a107e6a..29681e1 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -10,6 +10,7 @@
 #include <malloc.h>
 #include "fsl_sec.h"
 #include "jr.h"
+#include "jobdesc.h"
 
 #define CIRC_CNT(head, tail, size)	(((head) - (tail)) & (size - 1))
 #define CIRC_SPACE(head, tail, size)	CIRC_CNT((tail), (head) + 1, (size))
@@ -319,6 +320,120 @@ int sec_reset(void)
 	return 0;
 }
 
+static int instantiate_rng(void)
+{
+	struct result op;
+	u32 *desc;
+	u32 rdsta_val;
+	int ret = 0;
+	ccsr_sec_t __iomem *sec =
+			(ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	struct rng4tst __iomem *rng =
+			(struct rng4tst __iomem *)&sec->rng;
+
+	memset(&op, 0, sizeof(struct result));
+
+	desc = malloc(sizeof(int) * 6);
+	if (!desc) {
+		printf("cannot allocate RNG init descriptor memory\n");
+		return -1;
+	}
+
+	inline_cnstr_jobdesc_rng_instantiation(desc);
+	ret = run_descriptor_jr(desc);
+
+	if (ret)
+		printf("RNG: Instantiation failed with error %x\n", ret);
+
+	rdsta_val = sec_in32(&rng->rdsta);
+	if (op.status || !(rdsta_val & RNG_STATE0_HANDLE_INSTANTIATED))
+		return -1;
+
+	return ret;
+}
+
+static u8 get_rng_vid(void)
+{
+	ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+	u32 cha_vid = sec_in32(&sec->chavid_ls);
+
+	return (cha_vid & SEC_CHAVID_RNG_LS_MASK) >> SEC_CHAVID_LS_RNG_SHIFT;
+}
+
+/*
+ * By default, the TRNG runs for 200 clocks per sample;
+ * 1200 clocks per sample generates better entropy.
+ */
+static void kick_trng(int ent_delay)
+{
+	ccsr_sec_t __iomem *sec =
+			(ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	struct rng4tst __iomem *rng =
+			(struct rng4tst __iomem *)&sec->rng;
+	u32 val;
+
+	/* put RNG4 into program mode */
+	sec_setbits32(&rng->rtmctl, RTMCTL_PRGM);
+	/* rtsdctl bits 0-15 contain "Entropy Delay, which defines the
+	 * length (in system clocks) of each Entropy sample taken
+	 * */
+	val = sec_in32(&rng->rtsdctl);
+	val = (val & ~RTSDCTL_ENT_DLY_MASK) |
+	      (ent_delay << RTSDCTL_ENT_DLY_SHIFT);
+	sec_out32(&rng->rtsdctl, val);
+	/* min. freq. count, equal to 1/4 of the entropy sample length */
+	sec_out32(&rng->rtfreqmin, ent_delay >> 2);
+	/* max. freq. count, equal to 8 times the entropy sample length */
+	sec_out32(&rng->rtfreqmax, ent_delay << 3);
+	/* put RNG4 into run mode */
+	sec_clrbits32(&rng->rtmctl, RTMCTL_PRGM);
+}
+
+static int rng_init(void)
+{
+	int ret, ent_delay = RTSDCTL_ENT_DLY_MIN;
+	ccsr_sec_t __iomem *sec =
+			(ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	struct rng4tst __iomem *rng =
+			(struct rng4tst __iomem *)&sec->rng;
+
+	u32 rdsta = sec_in32(&rng->rdsta);
+
+	/* Check if RNG state 0 handler is already instantiated */
+	if (rdsta & RNG_STATE0_HANDLE_INSTANTIATED)
+		return 0;
+
+	do {
+		/*
+		 * If either of the SH's were instantiated by somebody else
+		 * then it is assumed that the entropy
+		 * parameters are properly set and thus the function
+		 * setting these (kick_trng(...)) is skipped.
+		 * Also, if a handle was instantiated, do not change
+		 * the TRNG parameters.
+		 */
+		kick_trng(ent_delay);
+		ent_delay += 400;
+		/*
+		 * if instantiate_rng(...) fails, the loop will rerun
+		 * and the kick_trng(...) function will modfiy the
+		 * upper and lower limits of the entropy sampling
+		 * interval, leading to a sucessful initialization of
+		 * the RNG.
+		 */
+		ret = instantiate_rng();
+	} while ((ret == -1) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
+	if (ret) {
+		printf("RNG: Failed to instantiate RNG\n");
+		return ret;
+	}
+
+	 /* Enable RDB bit so that RNG works faster */
+	sec_setbits32(&sec->scfgr, SEC_SCFGR_RDBENABLE);
+
+	return ret;
+}
+
 int sec_init(void)
 {
 	int ret = 0;
@@ -330,8 +445,18 @@ int sec_init(void)
 	sec_out32(&sec->mcfgr, mcr | 1 << MCFGR_PS_SHIFT);
 #endif
 	ret = jr_init();
-	if (ret < 0)
+	if (ret < 0) {
+		printf("SEC initialization failed\n");
 		return -1;
+	}
+
+	if (get_rng_vid() >= 4) {
+		if (rng_init() < 0) {
+			printf("RNG instantiation failed\n");
+			return -1;
+		}
+		printf("SEC: RNG instantiated\n");
+	}
 
 	return ret;
 }
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index 2a26d85..aa850a3 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -29,6 +29,36 @@
 
 /* Security Engine Block (MS = Most Sig., LS = Least Sig.) */
 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+/* RNG4 TRNG test registers */
+struct rng4tst {
+#define RTMCTL_PRGM 0x00010000	/* 1 -> program mode, 0 -> run mode */
+	u32 rtmctl;		/* misc. control register */
+	u32 rtscmisc;		/* statistical check misc. register */
+	u32 rtpkrrng;		/* poker range register */
+#define RTSDCTL_ENT_DLY_MIN	1200
+#define RTSDCTL_ENT_DLY_MAX	12800
+	union {
+		u32 rtpkrmax;	/* PRGM=1: poker max. limit register */
+		u32 rtpkrsq;	/* PRGM=0: poker square calc. result register */
+	};
+#define RTSDCTL_ENT_DLY_SHIFT 16
+#define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
+	u32 rtsdctl;		/* seed control register */
+	union {
+		u32 rtsblim;	/* PRGM=1: sparse bit limit register */
+		u32 rttotsam;	/* PRGM=0: total samples register */
+	};
+	u32 rtfreqmin;		/* frequency count min. limit register */
+	union {
+		u32 rtfreqmax;	/* PRGM=1: freq. count max. limit register */
+		u32 rtfreqcnt;	/* PRGM=0: freq. count register */
+	};
+	u32 rsvd1[40];
+#define RNG_STATE0_HANDLE_INSTANTIATED	0x00000001
+	u32 rdsta;		/*RNG DRNG Status Register*/
+	u32 rsvd2[15];
+};
+
 typedef struct ccsr_sec {
 	u32	res0;
 	u32	mcfgr;		/* Master CFG Register */
@@ -53,7 +83,9 @@ typedef struct ccsr_sec {
 	u8	res4[0x40];
 	u32	dar;		/* DECO Avail Register */
 	u32	drr;		/* DECO Reset Register */
-	u8	res5[0xe78];
+	u8	res5[0x4d8];
+	struct rng4tst rng;	/* RNG Registers */
+	u8	res11[0x8a0];
 	u32	crnr_ms;	/* CHA Revision Number Register, MS */
 	u32	crnr_ls;	/* CHA Revision Number Register, LS */
 	u32	ctpr_ms;	/* Compile Time Parameters Register, MS */
-- 
1.8.1.4



More information about the U-Boot mailing list