[U-Boot] [PATCH v4] powerpc/t104xrdb: Add T1042RDB board support

[York Sun]

On 08/19/2014 12:16 AM, Vijay Rai wrote:
> T1042RDB is a Freescale reference board that hosts the T1042 SoC
> (and variants). The board is similar to T1040RDB, T1042 is a reduced
> personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
> 
> T1042RDB is configured with serdes protocol 0x86 which can support
> following interfaces
> - 2 RGMII's on DTSEC4, DTSEC5
> - 1 SGMII on DTSEC3
> DTSEC1, DTSEC2 are not connected on board.
> 
> This Patch
> - add T1042RDB support
> - updates README file for T1042RDB details and update commands for switching
>   to alternate banks from vBank0 to vBank4 and vice versa
> 
> This patch also does minor clean ups for fdt defines for T1042RDB and
> T1042RDB_PI board
> 
> Signed-off-by: Vijay Rai <vijay.rai at freescale.com>
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> ---
> changes for v4: There are some changes regarding Kconfig, 
> Added configs/T1042RDB_defconfig file to support T1042RDB,added T1042RDB as
> config option into board/freescale/t104xrdb/MAINTAINERS  
>

Applied to u-boot-mpc85xx, awaiting upstream.

York