[U-Boot] [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212
qiang.zhao at freescale.com
qiang.zhao at freescale.com
Fri Sep 26 07:55:32 CEST 2014
On 9/26/14 1:01 PM, York Sun wrote:
> -----Original Message-----
> From: Sun York-R58495
> Sent: Friday, September 26, 2014 1:01 PM
> To: Zhao Qiang-B45475; u-boot at lists.denx.de
> Cc: Xie Xiaobo-R63061; Zhao Qiang-B45475
> Subject: Re: [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212
>
> On 9/25/14 9:37 PM, "Zhao Qiang" <B45475 at freescale.com> wrote:
>
> >T2080 v1.0 has this errata while v1.1 has fixed this errata by
> >hardware, add a new function to check the SVR_SOC_VER, SVR_MAJ and
> >SVR_MIN first, if the cpu is T2080 and version is not v1.0, doesn't run
> >the a007212 errata_workaround.
> >
> >Signed-off-by: Zhao Qiang <B45475 at freescale.com>
> >---
>
>
> Qiang,
>
> I don't agree with your analysis.
>
> This workaround has two parts. One part is to to disable DDR PLL in RCW.
> The second part is to detect DDR PLL is disabled and to implement the
> software workaround to bring DDR up. U-boot has the second part, it is
> safe to apply to all versions for affected SoC. I put in the comments.
> Your patch detects the SVR and decide if the workaround should be applied.
> This is wrong. It should detect if DDR PLL is disabled. In case an old
> RCW is used, you don't want to end up with a dead board because DDR is
> disabled.
OK , got it , I will modify it for v2.
Thanks for you comment.
>
> York
Best Regards
Zhao Qiang
More information about the U-Boot
mailing list