[U-Boot] [PATCH 0/4] ls102xa: HYP/non-sec: for ls102xa.

[Li.Xiubo at freescale.com]

Hi York, Albert

Could you help me to review these patches ?

Thanks very much,

BRs
Xiubo



> -----Original Message-----
> From: Xiubo Li [mailto:Li.Xiubo at freescale.com]
> Sent: Tuesday, September 16, 2014 10:48 AM
> To: albert.u.boot at aribaud.net; Wang Huan-B18965; ijc at hellion.org.uk;
> hdegoede at redhat.com; Kushwaha Prabhakar-B32579; Wang Huan-B18965;
> andre.przywara at linaro.org; marc.zyngier at arm.com; yamada.m at jp.panasonic.com;
> Aggrwal Poonam-B10812; Leekha Shaveta-B20052; u-boot at lists.denx.de
> Cc: Xiubo Li-B47053
> Subject: [PATCH 0/4] ls102xa: HYP/non-sec: for ls102xa.
> 
> 
> Xiubo Li (4):
>   ARM: HYP/non-sec: add the pen address byte reverting support.
>   ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
>   ls102xa: HYP/non-sec: support for ls102xa boards
>   ARM: ls102xa: allow all device accessable in non-secure state
> 
>  arch/arm/cpu/armv7/ls102xa/cpu.c                  |  15 +++
>  arch/arm/cpu/armv7/nonsec_virt.S                  |   7 +-
>  arch/arm/include/asm/arch-ls102xa/config.h        |   3 +
>  arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h |   3 +
>  arch/arm/include/asm/arch-ls102xa/ns_access.h     | 117
> ++++++++++++++++++++++
>  board/freescale/common/Makefile                   |   2 +
>  board/freescale/common/ns_access.c                |  32 ++++++
>  board/freescale/ls1021aqds/ls1021aqds.c           |  88 ++++++++++++++++
>  board/freescale/ls1021atwr/ls1021atwr.c           |  87 ++++++++++++++++
>  include/configs/ls1021aqds.h                      |   8 ++
>  include/configs/ls1021atwr.h                      |   8 ++
>  include/configs/sun7i.h                           |   1 +
>  12 files changed, 369 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-ls102xa/ns_access.h
>  create mode 100644 board/freescale/common/ns_access.c
> 
> --
> 2.1.0.27.g96db324