[U-Boot] [PATCH 1/5] powerpc: ppc4xx: remove board support for KAREF and METROBOX
Masahiro Yamada
yamada.m at jp.panasonic.com
Sun Sep 28 18:37:57 CEST 2014
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
arch/powerpc/cpu/ppc4xx/Kconfig | 8 -
board/sandburst/common/flash.c | 493 ----------------
board/sandburst/common/sb_common.c | 349 ------------
board/sandburst/common/sb_common.h | 60 --
board/sandburst/karef/Kconfig | 12 -
board/sandburst/karef/MAINTAINERS | 6 -
board/sandburst/karef/Makefile | 16 -
board/sandburst/karef/config.mk | 21 -
board/sandburst/karef/hal_ka_of_auto.h | 324 -----------
board/sandburst/karef/hal_ka_sc_auto.h | 836 ----------------------------
board/sandburst/karef/init.S | 39 --
board/sandburst/karef/karef.c | 595 --------------------
board/sandburst/karef/karef.h | 60 --
board/sandburst/karef/karef_version.h | 10 -
board/sandburst/karef/u-boot.lds.debug | 130 -----
board/sandburst/metrobox/Kconfig | 12 -
board/sandburst/metrobox/MAINTAINERS | 6 -
board/sandburst/metrobox/Makefile | 15 -
board/sandburst/metrobox/config.mk | 16 -
board/sandburst/metrobox/hal_xc_auto.h | 553 ------------------
board/sandburst/metrobox/init.S | 37 --
board/sandburst/metrobox/metrobox.c | 561 -------------------
board/sandburst/metrobox/metrobox.h | 29 -
board/sandburst/metrobox/metrobox_version.h | 11 -
board/sandburst/metrobox/u-boot.lds.debug | 130 -----
configs/KAREF_defconfig | 3 -
configs/METROBOX_defconfig | 3 -
doc/README.scrapyard | 2 +
include/configs/KAREF.h | 284 ----------
include/configs/METROBOX.h | 349 ------------
30 files changed, 2 insertions(+), 4968 deletions(-)
delete mode 100644 board/sandburst/common/flash.c
delete mode 100644 board/sandburst/common/sb_common.c
delete mode 100644 board/sandburst/common/sb_common.h
delete mode 100644 board/sandburst/karef/Kconfig
delete mode 100644 board/sandburst/karef/MAINTAINERS
delete mode 100644 board/sandburst/karef/Makefile
delete mode 100644 board/sandburst/karef/config.mk
delete mode 100644 board/sandburst/karef/hal_ka_of_auto.h
delete mode 100644 board/sandburst/karef/hal_ka_sc_auto.h
delete mode 100644 board/sandburst/karef/init.S
delete mode 100644 board/sandburst/karef/karef.c
delete mode 100644 board/sandburst/karef/karef.h
delete mode 100644 board/sandburst/karef/karef_version.h
delete mode 100644 board/sandburst/karef/u-boot.lds.debug
delete mode 100644 board/sandburst/metrobox/Kconfig
delete mode 100644 board/sandburst/metrobox/MAINTAINERS
delete mode 100644 board/sandburst/metrobox/Makefile
delete mode 100644 board/sandburst/metrobox/config.mk
delete mode 100644 board/sandburst/metrobox/hal_xc_auto.h
delete mode 100644 board/sandburst/metrobox/init.S
delete mode 100644 board/sandburst/metrobox/metrobox.c
delete mode 100644 board/sandburst/metrobox/metrobox.h
delete mode 100644 board/sandburst/metrobox/metrobox_version.h
delete mode 100644 board/sandburst/metrobox/u-boot.lds.debug
delete mode 100644 configs/KAREF_defconfig
delete mode 100644 configs/METROBOX_defconfig
delete mode 100644 include/configs/KAREF.h
delete mode 100644 include/configs/METROBOX.h
diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig
index 41b525c..7c645f1 100644
--- a/arch/powerpc/cpu/ppc4xx/Kconfig
+++ b/arch/powerpc/cpu/ppc4xx/Kconfig
@@ -226,12 +226,6 @@ config TARGET_ALPR
config TARGET_P3P440
bool "Support p3p440"
-config TARGET_KAREF
- bool "Support KAREF"
-
-config TARGET_METROBOX
- bool "Support METROBOX"
-
config TARGET_XPEDITE1000
bool "Support xpedite1000"
@@ -306,8 +300,6 @@ source "board/mpl/pip405/Kconfig"
source "board/pcs440ep/Kconfig"
source "board/prodrive/alpr/Kconfig"
source "board/prodrive/p3p440/Kconfig"
-source "board/sandburst/karef/Kconfig"
-source "board/sandburst/metrobox/Kconfig"
source "board/sbc405/Kconfig"
source "board/sc3/Kconfig"
source "board/t3corp/Kconfig"
diff --git a/board/sandburst/common/flash.c b/board/sandburst/common/flash.c
deleted file mode 100644
index ad046be..0000000
--- a/board/sandburst/common/flash.c
+++ /dev/null
@@ -1,493 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung at artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-/*
- * Ported from Ebony flash support
- * Travis B. Sawyer
- * Sandburst Corporation
- */
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
- {0xfff80000} /* Boot Flash */
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long total_b = 0;
- unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
- unsigned short index = 0;
- int i;
-
-
- DEBUGF("\n");
- DEBUGF("FLASH: Index: %d\n", index);
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
-
- /* check whether the address is 0 */
- if (flash_addr_table[index][i] == 0) {
- continue;
- }
-
- /* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size(
- (vu_long *)flash_addr_table[index][i], &flash_info[i]);
- flash_info[i].size = size_b[i];
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i]<<20);
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
- }
-
- total_b += flash_info[i].size;
- }
-
- return total_b;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " "
- );
- }
- printf ("\n");
- return;
- }
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
- DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
-
- /* Write auto select command: read Manufacturer ID */
- udelay(10000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- udelay(1000);
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- udelay(1000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
- udelay(1000);
-
- value = addr2[0];
-
- DEBUGF("FLASH MANUFACT: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr2[1]; /* device ID */
-
- DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_LV040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000; /* => 512 kb */
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (info->flash_id == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
- }
-
- /* reset to return to reading data */
- addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t *info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
- start = get_timer (0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
- DEBUGF("Erasing sector %p\n", addr2);
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- for (i=0; i<50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- }
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7(info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
deleted file mode 100644
index c23ef50..0000000
--- a/board/sandburst/common/sb_common.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * Copyright (C) 2005 Sandburst Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include "sb_common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-long int fixed_sdram (void);
-
-/*************************************************************************
- * metrobox_get_master
- *
- * PRI_N - active low signal. If the GPIO pin is low we are the master
- *
- ************************************************************************/
-int sbcommon_get_master(void)
-{
- ppc440_gpio_regs_t *gpio_regs;
-
- gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
-
- if (gpio_regs->in & SBCOMMON_GPIO_PRI_N) {
- return 0;
- }
- else {
- return 1;
- }
-}
-
-/*************************************************************************
- * metrobox_secondary_present
- *
- * Figure out if secondary/slave board is present
- *
- ************************************************************************/
-int sbcommon_secondary_present(void)
-{
- ppc440_gpio_regs_t *gpio_regs;
-
- gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
-
- if (gpio_regs->in & SBCOMMON_GPIO_SEC_PRES)
- return 0;
- else
- return 1;
-}
-
-/*************************************************************************
- * sbcommon_get_serial_number
- *
- * Retrieve the board serial number via the mac address in eeprom
- *
- ************************************************************************/
-unsigned short sbcommon_get_serial_number(void)
-{
- unsigned char buff[0x100];
- unsigned short sernum;
-
- /* Get the board serial number from eeprom */
- /* Initialize I2C */
- i2c_set_bus_num(0);
-
- /* Read 256 bytes in EEPROM */
- i2c_read (0x50, 0, 1, buff, 0x100);
-
- memcpy(&sernum, &buff[0xF4], 2);
- sernum /= 32;
-
- return (sernum);
-}
-
-/*************************************************************************
- * sbcommon_fans
- *
- * Spin up fans 2 & 3 to get some air moving. OS will take care
- * of the rest. This is mostly a precaution...
- *
- * Assumes i2c bus 1 is ready.
- *
- ************************************************************************/
-void sbcommon_fans(void)
-{
- /*
- * Attempt to turn on 2 of the fans...
- * Need to go through the bridge
- */
- i2c_set_bus_num(1);
- puts ("FANS: ");
-
- /* select fan4 through the bridge */
- i2c_reg_write(0x73, /* addr */
- 0x00, /* reg */
- 0x08); /* val = bus 4 */
-
- /* Turn on FAN 4 */
- i2c_reg_write(0x2e,
- 1,
- 0x80);
-
- i2c_reg_write(0x2e,
- 0,
- 0x19);
-
- /* Deselect bus 4 on the bridge */
- i2c_reg_write(0x73,
- 0x00,
- 0x00);
-
- /* select fan3 through the bridge */
- i2c_reg_write(0x73, /* addr */
- 0x00, /* reg */
- 0x04); /* val = bus 3 */
-
- /* Turn on FAN 3 */
- i2c_reg_write(0x2e,
- 1,
- 0x80);
-
- i2c_reg_write(0x2e,
- 0,
- 0x19);
-
- /* Deselect bus 3 on the bridge */
- i2c_reg_write(0x73,
- 0x00,
- 0x00);
-
- /* select fan2 through the bridge */
- i2c_reg_write(0x73, /* addr */
- 0x00, /* reg */
- 0x02); /* val = bus 4 */
-
- /* Turn on FAN 2 */
- i2c_reg_write(0x2e,
- 1,
- 0x80);
-
- i2c_reg_write(0x2e,
- 0,
- 0x19);
-
- /* Deselect bus 2 on the bridge */
- i2c_reg_write(0x73,
- 0x00,
- 0x00);
-
- /* select fan1 through the bridge */
- i2c_reg_write(0x73, /* addr */
- 0x00, /* reg */
- 0x01); /* val = bus 0 */
-
- /* Turn on FAN 1 */
- i2c_reg_write(0x2e,
- 1,
- 0x80);
-
- i2c_reg_write(0x2e,
- 0,
- 0x19);
-
- /* Deselect bus 1 on the bridge */
- i2c_reg_write(0x73,
- 0x00,
- 0x00);
-
- puts ("on\n");
- i2c_set_bus_num(0);
-
- return;
-
-}
-
-/*************************************************************************
- * initdram
- *
- * Initialize sdram
- *
- ************************************************************************/
-phys_size_t initdram (int board_type)
-{
- long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram ();
-#else
- dram_size = fixed_sdram ();
-#endif
- return dram_size;
-}
-
-
-/*************************************************************************
- * testdram
- *
- *
- ************************************************************************/
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
- uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
- uint *p;
-
- printf("Testing SDRAM: ");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("OK\n");
- return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- * fixed sdram init -- doesn't use serial presence detect.
- *
- * Assumes: 128 MB, non-ECC, non-registered
- * PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram (void)
-{
- uint reg;
-
- /*--------------------------------------------------------------------
- * Setup some default
- *------------------------------------------------------------------*/
- mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
- mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
-
- /*--------------------------------------------------------------------
- * Setup for board-specific specific mem
- *------------------------------------------------------------------*/
- /*
- * Following for CAS Latency = 2.5 @ 133 MHz PLB
- */
- mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
- /* RA=10 RD=3 */
- mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */
- udelay (400); /* Delay 200 usecs (min) */
-
- /*--------------------------------------------------------------------
- * Enable the controller, then wait for DCEN to complete
- *------------------------------------------------------------------*/
- mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
- for (;;) {
- mfsdram (SDRAM0_MCSTS, reg);
- if (reg & 0x80000000)
- break;
- }
-
- return (128 * 1024 * 1024); /* 128 MB */
-}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
-
-/*************************************************************************
- * board_get_enetaddr
- *
- * Get the ethernet MAC address for the management ethernet from the
- * strap EEPROM. Note that is the BASE address for the range of
- * external ethernet MACs on the board. The base + 31 is the actual
- * mgmt mac address.
- *
- ************************************************************************/
-
-void board_get_enetaddr(int macaddr_idx, uchar *enet)
-{
- int i;
- unsigned short tmp;
- unsigned char buff[0x100], *cp;
-
- if (0 == macaddr_idx) {
-
- /* Initialize I2C */
- i2c_set_bus_num(0);
-
- /* Read 256 bytes in EEPROM */
- i2c_read (0x50, 0, 1, buff, 0x100);
-
- cp = &buff[0xF0];
-
- for (i = 0; i < 6; i++,cp++)
- enet[i] = *cp;
-
- memcpy(&tmp, &enet[4], 2);
- tmp += 31;
- memcpy(&enet[4], &tmp, 2);
-
- } else {
- enet[0] = 0x02;
- enet[1] = 0x00;
- enet[2] = 0x00;
- enet[3] = 0x00;
- enet[4] = 0x00;
- if (1 == sbcommon_get_master() ) {
- /* Master/Primary card */
- enet[5] = 0x01;
- } else {
- /* Slave/Secondary card */
- enet [5] = 0x02;
- }
- }
-
- return;
-}
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-
- return (ctrlc());
-}
-#endif
diff --git a/board/sandburst/common/sb_common.h b/board/sandburst/common/sb_common.h
deleted file mode 100644
index 5740633..0000000
--- a/board/sandburst/common/sb_common.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef __SBCOMMON_H__
-#define __SBCOMMON_H__
-/*
- * Copyright (C) 2005 Sandburst Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-
-/*
- * GPIO Settings
- */
-/* Chassis settings */
-#define SBCOMMON_GPIO_PRI_N 0x00001000 /* 0 = Chassis Master, 1 = Slave */
-#define SBCOMMON_GPIO_SEC_PRES 0x00000800 /* 1 = Other board present */
-
-/* Debug LEDs */
-#define SBCOMMON_GPIO_DBGLED_0 0x00000400
-#define SBCOMMON_GPIO_DBGLED_1 0x00000200
-#define SBCOMMON_GPIO_DBGLED_2 0x00100000
-#define SBCOMMON_GPIO_DBGLED_3 0x00000100
-
-#define SBCOMMON_GPIO_DBGLEDS (SBCOMMON_GPIO_DBGLED_0 | \
- SBCOMMON_GPIO_DBGLED_1 | \
- SBCOMMON_GPIO_DBGLED_2 | \
- SBCOMMON_GPIO_DBGLED_3)
-
-#define SBCOMMON_GPIO_SYS_FAULT 0x00000080
-#define SBCOMMON_GPIO_SYS_OTEMP 0x00000040
-#define SBCOMMON_GPIO_SYS_STATUS 0x00000020
-
-#define SBCOMMON_GPIO_SYS_LEDS (SBCOMMON_GPIO_SYS_STATUS)
-
-#define SBCOMMON_GPIO_LEDS (SBCOMMON_GPIO_DBGLED_0 | \
- SBCOMMON_GPIO_DBGLED_1 | \
- SBCOMMON_GPIO_DBGLED_2 | \
- SBCOMMON_GPIO_DBGLED_3 | \
- SBCOMMON_GPIO_SYS_STATUS)
-
-typedef struct ppc440_gpio_regs {
- volatile unsigned long out;
- volatile unsigned long tri_state;
- volatile unsigned long dummy[4];
- volatile unsigned long open_drain;
- volatile unsigned long in;
-} __attribute__((packed)) ppc440_gpio_regs_t;
-
-int sbcommon_get_master(void);
-int sbcommon_secondary_present(void);
-unsigned short sbcommon_get_serial_number(void);
-void sbcommon_fans(void);
-void board_get_enetaddr(int macaddr_idx, uchar *enet);
-
-#endif /* __SBCOMMON_H__ */
diff --git a/board/sandburst/karef/Kconfig b/board/sandburst/karef/Kconfig
deleted file mode 100644
index 1b04576..0000000
--- a/board/sandburst/karef/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_KAREF
-
-config SYS_BOARD
- default "karef"
-
-config SYS_VENDOR
- default "sandburst"
-
-config SYS_CONFIG_NAME
- default "KAREF"
-
-endif
diff --git a/board/sandburst/karef/MAINTAINERS b/board/sandburst/karef/MAINTAINERS
deleted file mode 100644
index 21510e8..0000000
--- a/board/sandburst/karef/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-KAREF BOARD
-#M: Travis Sawyer <travis.sawyer at sandburst.com>
-S: Orphan (since 2014-03)
-F: board/sandburst/karef/
-F: include/configs/KAREF.h
-F: configs/KAREF_defconfig
diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile
deleted file mode 100644
index ce29b41..0000000
--- a/board/sandburst/karef/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2005
-# Sandburst Corporation
-# Travis B. Sawyer
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# TBS: add for debugging purposes
-ccflags-y += -DBUILDUSER='"$(shell whoami)"'
-
-obj-y = karef.o ../common/flash.o ../common/sb_common.o
-extra-y += init.o
diff --git a/board/sandburst/karef/config.mk b/board/sandburst/karef/config.mk
deleted file mode 100644
index b73986d..0000000
--- a/board/sandburst/karef/config.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# (C) Copyright 2005
-# Sandburst Corporation
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-#
-# Sandburst Corporation Metrobox Reference Design
-# Travis B. Sawyer
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/sandburst/karef/hal_ka_of_auto.h b/board/sandburst/karef/hal_ka_of_auto.h
deleted file mode 100644
index cc501c9..0000000
--- a/board/sandburst/karef/hal_ka_of_auto.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/* ****************************************************************
- * Common defs for reg spec for chip ka_of
- * Auto-generated by trex2: DO NOT HAND-EDIT!!
- * ****************************************************************
- */
-
-#ifndef HAL_KA_OF_AUTO_H
-#define HAL_KA_OF_AUTO_H
-
-
-/* ----------------------------------------------------------------
- * For block: 'ofem'
- */
-
-/* ---- Block instance addressing (for block-select) */
-#define OFEM_BLOCK_ADDR_BIT_L 6
-#define OFEM_BLOCK_ADDR_BIT_H 9
-#define OFEM_BLOCK_ADDR_WIDTH 4
-
-#define OFEM_ADDR 0x0
-
-/* ---- Reg addressing (within block) */
-#define OFEM_REG_ADDR_BIT_L 2
-#define OFEM_REG_ADDR_BIT_H 5
-#define OFEM_REG_ADDR_WIDTH 4
-
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_REVISION */
-#define SAND_HAL_KA_OF_OFEM_REVISION_OFFSET 0x000
-#ifndef SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_REVISION_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_REVISION_MSB 31
-#define SAND_HAL_KA_OF_OFEM_REVISION_LSB 0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_RESET */
-#define SAND_HAL_KA_OF_OFEM_RESET_OFFSET 0x004
-#ifndef SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_RESET_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_RESET_MSB 31
-#define SAND_HAL_KA_OF_OFEM_RESET_LSB 0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_CNTL */
-#define SAND_HAL_KA_OF_OFEM_CNTL_OFFSET 0x018
-#ifndef SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_CNTL_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_CNTL_MSB 31
-#define SAND_HAL_KA_OF_OFEM_CNTL_LSB 0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_MAC_FLOW_CTL */
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_OFFSET 0x01c
-#ifndef SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MSB 31
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LSB 0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_INTERRUPT */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_OFFSET 0x008
-#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MSB 31
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_LSB 0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_INTERRUPT_MASK */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_OFFSET 0x00c
-#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MSB 31
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_LSB 0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_SCRATCH */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_OFFSET 0x010
-#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MSB 31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_LSB 0
-
-/* ================================================================
- * ---- Register KA_OF_OFEM_SCRATCH_MASK */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_OFFSET 0x014
-#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MSB 31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_LSB 0
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_REVISION */
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK 0x0000ff00
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT 8
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MSB 15
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_LSB 8
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_DEFAULT 0x00000024
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK 0x000000ff
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MSB 7
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_LSB 0
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_RESET */
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK 0x00000004
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_SHIFT 2
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MSB 2
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_LSB 2
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK 0x00000002
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_SHIFT 1
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MSB 1
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_LSB 1
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK 0x00000001
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MSB 0
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_LSB 0
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_CNTL */
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MASK 0x000000c0
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_SHIFT 6
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MSB 7
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_LSB 6
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK 0x00000030
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT 4
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MSB 5
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_LSB 4
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MASK 0x0000000c
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_SHIFT 2
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MSB 3
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_LSB 2
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MASK 0x00000003
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MSB 1
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_LSB 0
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_MAC_FLOW_CTL */
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MASK 0x00000100
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_SHIFT 8
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MSB 8
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_LSB 8
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK 0x00000010
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT 4
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB 4
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB 4
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK 0x0000000f
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB 3
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB 0
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_INTERRUPT */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MASK 0x00000100
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_SHIFT 8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MSB 8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_LSB 8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MASK 0x00000080
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_SHIFT 7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MSB 7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_LSB 7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MASK 0x00000040
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_SHIFT 6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MSB 6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_LSB 6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MASK 0x00000020
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_SHIFT 5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MSB 5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_LSB 5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MASK 0x00000010
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_SHIFT 4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MSB 4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_LSB 4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MASK 0x00000008
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_SHIFT 3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MSB 3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_LSB 3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MASK 0x00000004
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_SHIFT 2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MSB 2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_LSB 2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MASK 0x00000002
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_SHIFT 1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MSB 1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_LSB 1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MASK 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MSB 0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_LSB 0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_INTERRUPT_MASK */
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK 0x00000100
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT 8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB 8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB 8
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK 0x00000080
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT 7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB 7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB 7
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK 0x00000040
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT 6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB 6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB 6
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK 0x00000020
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT 5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB 5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB 5
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK 0x00000010
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT 4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB 4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB 4
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK 0x00000008
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT 3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB 3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB 3
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK 0x00000004
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT 2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB 2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB 2
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK 0x00000002
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT 1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB 1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB 1
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK 0x00000001
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB 0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB 0
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT 0x00000001
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_SCRATCH */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MSB 31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_LSB 0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_OF_OFEM_SCRATCH_MASK */
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff
-
-#endif /* matches #ifndef HAL_KA_OF_AUTO_H */
diff --git a/board/sandburst/karef/hal_ka_sc_auto.h b/board/sandburst/karef/hal_ka_sc_auto.h
deleted file mode 100644
index db1cec2..0000000
--- a/board/sandburst/karef/hal_ka_sc_auto.h
+++ /dev/null
@@ -1,836 +0,0 @@
-/* ****************************************************************
- * Common defs for reg spec for chip ka_sc
- * Auto-generated by trex2: DO NOT HAND-EDIT!!
- * ****************************************************************
- */
-
-#ifndef HAL_KA_SC_AUTO_H
-#define HAL_KA_SC_AUTO_H
-
-
-/* ----------------------------------------------------------------
- * For block: 'scan'
- */
-
-/* ---- Block instance addressing (for block-select) */
-#define SCAN_BLOCK_ADDR_BIT_L 7
-#define SCAN_BLOCK_ADDR_BIT_H 9
-#define SCAN_BLOCK_ADDR_WIDTH 3
-
-#define SCAN_ADDR 0x0
-
-/* ---- Reg addressing (within block) */
-#define SCAN_REG_ADDR_BIT_L 2
-#define SCAN_REG_ADDR_BIT_H 6
-#define SCAN_REG_ADDR_WIDTH 5
-
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_REVISION */
-#define SAND_HAL_KA_SC_SCAN_REVISION_OFFSET 0x000
-#ifndef SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_REVISION_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_REVISION_MSB 31
-#define SAND_HAL_KA_SC_SCAN_REVISION_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_RESET */
-#define SAND_HAL_KA_SC_SCAN_RESET_OFFSET 0x004
-#ifndef SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_RESET_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_RESET_MSB 31
-#define SAND_HAL_KA_SC_SCAN_RESET_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_STATUS */
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFFSET 0x008
-#ifndef SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_STATUS_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_STATUS_MSB 31
-#define SAND_HAL_KA_SC_SCAN_STATUS_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_CNTL */
-#define SAND_HAL_KA_SC_SCAN_CNTL_OFFSET 0x01c
-#ifndef SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_CNTL_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_CNTL_MSB 31
-#define SAND_HAL_KA_SC_SCAN_CNTL_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_INFO */
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_OFFSET 0x020
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MSB 31
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_FROM_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_OFFSET 0x024
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_FROM_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_OFFSET 0x028
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_TO_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_OFFSET 0x02c
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_TO_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_OFFSET 0x030
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCAN_CTRL */
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_OFFSET 0x034
-#ifndef SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_PLL_CTRL */
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_OFFSET 0x038
-#ifndef SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MSB 31
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_CORE_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_OFFSET 0x03c
-#ifndef SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MSB 31
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_DR_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_OFFSET 0x040
-#ifndef SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MSB 31
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SPI_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_OFFSET 0x044
-#ifndef SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_BRD_OUT_DATA */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_OFFSET 0x048
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MSB 31
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_OFFSET 0x04c
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MSB 31
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_BRD_BRD_IN */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_OFFSET 0x050
-#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MSB 31
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_MISC */
-#define SAND_HAL_KA_SC_SCAN_MISC_OFFSET 0x054
-#ifndef SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_MISC_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_MISC_MSB 31
-#define SAND_HAL_KA_SC_SCAN_MISC_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_INTERRUPT */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OFFSET 0x00c
-#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MSB 31
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_INTERRUPT_MASK */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OFFSET 0x010
-#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MSB 31
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCRATCH */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_OFFSET 0x014
-#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_LSB 0
-
-/* ================================================================
- * ---- Register KA_SC_SCAN_SCRATCH_MASK */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_OFFSET 0x018
-#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_LSB 0
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_REVISION */
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK 0x0000ff00
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT 8
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MSB 15
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_LSB 8
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_DEFAULT 0x00000023
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK 0x000000ff
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MSB 7
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_LSB 0
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_RESET */
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK 0x00000200
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_SHIFT 9
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MSB 9
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_LSB 9
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK 0x00000100
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_SHIFT 8
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MSB 8
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_LSB 8
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK 0x00000080
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_SHIFT 7
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MSB 7
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_LSB 7
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK 0x00000040
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_SHIFT 6
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MSB 6
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_LSB 6
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK 0x00000020
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_SHIFT 5
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MSB 5
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_LSB 5
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK 0x00000010
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_SHIFT 4
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MSB 4
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_LSB 4
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK 0x00000008
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_SHIFT 3
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MSB 3
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_LSB 3
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK 0x00000002
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_SHIFT 1
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MSB 1
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_LSB 1
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK 0x00000001
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MSB 0
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_LSB 0
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_STATUS */
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MASK 0x00000040
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_SHIFT 6
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MSB 6
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_LSB 6
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MASK 0x00000020
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_SHIFT 5
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MSB 5
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_LSB 5
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MASK 0x00000010
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_SHIFT 4
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MSB 4
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_LSB 4
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MASK 0x00000008
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_SHIFT 3
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MSB 3
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_LSB 3
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MASK 0x00000004
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_SHIFT 2
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MSB 2
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_LSB 2
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MASK 0x00000002
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_SHIFT 1
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MSB 1
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_LSB 1
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MASK 0x00000001
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MSB 0
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_LSB 0
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_CNTL */
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MASK 0x00000400
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_SHIFT 10
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MSB 10
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_LSB 10
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MASK 0x00000200
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_SHIFT 9
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MSB 9
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_LSB 9
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_DEFAULT 0x00000001
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MASK 0x00000100
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_SHIFT 8
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MSB 8
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_LSB 8
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_DEFAULT 0x00000001
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MASK 0x000000c0
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_SHIFT 6
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MSB 7
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_LSB 6
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK 0x00000030
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT 4
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MSB 5
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_LSB 4
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MASK 0x0000000c
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_SHIFT 2
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MSB 3
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_LSB 2
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MASK 0x00000003
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MSB 1
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_LSB 0
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_INFO */
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK 0x0000f000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT 12
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MSB 15
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_LSB 12
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK 0x00000300
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT 8
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MSB 9
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_LSB 8
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK 0x000000f0
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT 4
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MSB 7
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_LSB 4
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK 0x00000003
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MSB 1
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_LSB 0
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_FROM_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_FROM_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_TO_0 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_TO_1 */
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCAN_CTRL */
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MASK 0x04000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_SHIFT 26
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MSB 26
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_LSB 26
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MASK 0x03000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_SHIFT 24
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MSB 25
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_LSB 24
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MASK 0x00100000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_SHIFT 20
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MSB 20
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_LSB 20
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MASK 0x00080000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_SHIFT 19
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MSB 19
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_LSB 19
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MASK 0x00040000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_SHIFT 18
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MSB 18
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_LSB 18
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MASK 0x00020000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_SHIFT 17
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MSB 17
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_LSB 17
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MASK 0x00010000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_SHIFT 16
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MSB 16
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_LSB 16
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MASK 0x00001000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_SHIFT 12
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MSB 12
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_LSB 12
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MASK 0x00000800
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SHIFT 11
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MSB 11
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_LSB 11
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MASK 0x00000400
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SHIFT 10
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MSB 10
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_LSB 10
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MASK 0x00000200
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SHIFT 9
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MSB 9
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_LSB 9
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MASK 0x00000100
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SHIFT 8
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MSB 8
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_LSB 8
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MASK 0x00000018
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_SHIFT 3
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MSB 4
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_LSB 3
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MASK 0x00000004
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_SHIFT 2
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MSB 2
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_LSB 2
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MASK 0x00000002
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_SHIFT 1
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MSB 1
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_LSB 1
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MASK 0x00000001
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MSB 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_PLL_CTRL */
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MASK 0x00002000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_SHIFT 13
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MSB 13
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_LSB 13
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MASK 0x00001000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_SHIFT 12
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MSB 12
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_LSB 12
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MASK 0x00000800
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_SHIFT 11
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MSB 11
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_LSB 11
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MASK 0x00000400
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_SHIFT 10
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MSB 10
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_LSB 10
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MASK 0x00000200
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_SHIFT 9
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MSB 9
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_LSB 9
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MASK 0x00000100
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_SHIFT 8
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MSB 8
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_LSB 8
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MASK 0x00000080
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_SHIFT 7
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MSB 7
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_LSB 7
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MASK 0x00000040
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_SHIFT 6
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MSB 6
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_LSB 6
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MASK 0x00000020
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_SHIFT 5
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MSB 5
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_LSB 5
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MASK 0x00000010
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_SHIFT 4
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MSB 4
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_LSB 4
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MASK 0x00000008
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_SHIFT 3
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MSB 3
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_LSB 3
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MASK 0x00000007
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MSB 2
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_LSB 0
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_CORE_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MSB 23
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_DR_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MSB 23
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SPI_CLK_COUNT */
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MSB 23
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_BRD_OUT_DATA */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MASK 0x001fffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MSB 20
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MASK 0x001fffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MSB 20
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_LSB 0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_BRD_BRD_IN */
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MASK 0x001fffff
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MSB 20
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_LSB 0
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_MISC */
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MASK 0x00000002
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_SHIFT 1
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MSB 1
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_LSB 1
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MASK 0x00000001
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MSB 0
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_LSB 0
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_INTERRUPT */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MASK 0x00000010
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_SHIFT 4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MSB 4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_LSB 4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MASK 0x00000008
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_SHIFT 3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MSB 3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_LSB 3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MASK 0x00000004
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_SHIFT 2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MSB 2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_LSB 2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MASK 0x00000002
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_SHIFT 1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MSB 1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_LSB 1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_DEFAULT 0x00000000
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MASK 0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MSB 0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_LSB 0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_INTERRUPT_MASK */
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK 0x00000010
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT 4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB 4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB 4
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK 0x00000008
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT 3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB 3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB 3
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK 0x00000004
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT 2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB 2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB 2
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK 0x00000002
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT 1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB 1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB 1
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK 0x00000001
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB 0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT 0x00000001
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCRATCH */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register KA_SC_SCAN_SCRATCH_MASK */
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff
-
-#endif /* matches #ifndef HAL_KA_SC_AUTO_H */
diff --git a/board/sandburst/karef/init.S b/board/sandburst/karef/init.S
deleted file mode 100644
index 61c5d07..0000000
--- a/board/sandburst/karef/init.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
-* Copyright (C) 2005 Sandburst Corporation
- * SPDX-License-Identifier: GPL-2.0+
-*/
-/*
- * Ported from Ebony init.S by Travis B. Sawyer
- */
-
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- * Pointer to the table is returned in r1
- *
- *************************************************************************/
-
- .section .bootpg,"ax"
- .globl tlbtab
-
-tlbtab:
- tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG)
- tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG)
- tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_IG)
- tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG )
- tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG )
- tlbtab_end
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
deleted file mode 100644
index 96d7dcd..0000000
--- a/board/sandburst/karef/karef.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * Copyright (C) 2005 Sandburst Corporation
- * Travis B. Sawyer
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include "karef.h"
-#include "karef_version.h"
-#include <timestamp.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include "../common/sb_common.h"
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
-#include <net.h>
-#endif
-
-void fpga_init (void);
-
-KAREF_BOARD_ID_ST board_id_as[] =
-{
- {"Undefined"}, /* Not specified */
- {"Kamino Reference Design"},
- {"Reserved"}, /* Reserved for future use */
- {"Reserved"}, /* Reserved for future use */
-};
-
-KAREF_BOARD_ID_ST ofem_board_id_as[] =
-{
- {"Undefined"},
- {"1x10 + 10x2"},
- {"Reserved"},
- {"Reserved"},
-};
-
-/*************************************************************************
- * board_early_init_f
- *
- * Setup chip selects, initialize the Opto-FPGA, initialize
- * interrupt polarity and triggers.
- ************************************************************************/
-int board_early_init_f (void)
-{
- ppc440_gpio_regs_t *gpio_regs;
-
- /* Enable GPIO interrupts */
- mtsdr(SDR0_PFC0, 0x00103E00);
-
- /* Setup access for LEDs, and system topology info */
- gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
- gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
- gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS;
-
- /* Turn on all the leds for now */
- gpio_regs->out = SBCOMMON_GPIO_LEDS;
-
- /*--------------------------------------------------------------------+
- | Initialize EBC CONFIG
- +-------------------------------------------------------------------*/
- mtebc(EBC0_CFG,
- EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE |
- EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
- EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
- EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE |
- EBC_CFG_PR_32);
-
- /*--------------------------------------------------------------------+
- | 1/2 MB FLASH. Initialize bank 0 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB0AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
- /*--------------------------------------------------------------------+
- | 8KB NVRAM/RTC. Initialize bank 1 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB1AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
-
- /*--------------------------------------------------------------------+
- | Compact Flash, uses 2 Chip Selects (2 & 6)
- +-------------------------------------------------------------------*/
- mtebc(PB2AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
- /*--------------------------------------------------------------------+
- | KaRef Scan FPGA. Initialize bank 3 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB5AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48200000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- | MAC A & B for Kamino. OFEM FPGA decodes the addresses
- | Initialize bank 4 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB4AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) |
- EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- | OFEM FPGA Initialize bank 5 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB3AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
-
- mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48400000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
-
- /*--------------------------------------------------------------------+
- | Compact Flash, uses 2 Chip Selects (2 & 6)
- +-------------------------------------------------------------------*/
- mtebc(PB6AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
- /*--------------------------------------------------------------------+
- | BME-32. Initialize bank 7 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB7AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- * Setup the interrupt controller polarities, triggers, etc.
- +-------------------------------------------------------------------*/
- /*
- * Because of the interrupt handling rework to handle 440GX interrupts
- * with the common code, we needed to change names of the UIC registers.
- * Here the new relationship:
- *
- * U-Boot name 440GX name
- * -----------------------
- * UIC0 UICB0
- * UIC1 UIC0
- * UIC2 UIC1
- * UIC3 UIC2
- */
- mtdcr (UIC1SR, 0xffffffff); /* clear all */
- mtdcr (UIC1ER, 0x00000000); /* disable all */
- mtdcr (UIC1CR, 0x00000000); /* all non- critical */
- mtdcr (UIC1PR, 0xfffffe03); /* polarity */
- mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */
- mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC1SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC2SR, 0xffffffff); /* clear all */
- mtdcr (UIC2ER, 0x00000000); /* disable all */
- mtdcr (UIC2CR, 0x00000000); /* all non-critical */
- mtdcr (UIC2PR, 0xffffc8ff); /* polarity */
- mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */
- mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC2SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC3SR, 0xffffffff); /* clear all */
- mtdcr (UIC3ER, 0x00000000); /* disable all */
- mtdcr (UIC3CR, 0x00000000); /* all non-critical */
- mtdcr (UIC3PR, 0xffff83ff); /* polarity */
- mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */
- mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC3SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC0SR, 0xfc000000); /* clear all */
- mtdcr (UIC0ER, 0x00000000); /* disable all */
- mtdcr (UIC0CR, 0x00000000); /* all non-critical */
- mtdcr (UIC0PR, 0xfc000000);
- mtdcr (UIC0TR, 0x00000000);
- mtdcr (UIC0VR, 0x00000001);
-
- fpga_init();
-
- return 0;
-}
-
-
-/*************************************************************************
- * checkboard
- *
- * Dump pertinent info to the console
- ************************************************************************/
-int checkboard (void)
-{
- sys_info_t sysinfo;
- unsigned char brd_rev, brd_id;
- unsigned short sernum;
- unsigned char scan_rev, scan_id, ofem_rev=0, ofem_id=0;
- unsigned char ofem_brd_rev, ofem_brd_id;
- KAREF_FPGA_REGS_ST *karef_ps;
- OFEM_FPGA_REGS_ST *ofem_ps;
-
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
- ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
-
- scan_id = (unsigned char)((karef_ps->revision_ul &
- SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK)
- >> SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT);
-
- scan_rev = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK)
- >> SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT);
-
- brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT);
-
- brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT);
-
- ofem_brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
-
- ofem_brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT);
-
- if (0xF != ofem_brd_id) {
- ofem_id = (unsigned char)((ofem_ps->revision_ul &
- SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK)
- >> SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT);
-
- ofem_rev = (unsigned char)((ofem_ps->revision_ul &
- SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK)
- >> SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT);
- }
-
- get_sys_info (&sysinfo);
-
- sernum = sbcommon_get_serial_number();
-
- printf ("Board: Sandburst Corporation Kamino Reference Design "
- "Serial Number: %d\n", sernum);
- printf ("%s\n", KAREF_U_BOOT_REL_STR);
-
- printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
- if (sbcommon_get_master()) {
- printf("Slot 0 - Master\nSlave board");
- if (sbcommon_secondary_present())
- printf(" present\n");
- else
- printf(" not detected\n");
- } else {
- printf("Slot 1 - Slave\n\n");
- }
-
- printf ("ScanFPGA ID:\t0x%02X\tRev: 0x%02X\n", scan_id, scan_rev);
- printf ("Board Rev:\t0x%02X\tID: 0x%02X\n", brd_rev, brd_id);
- if(0xF != ofem_brd_id) {
- printf("OFemFPGA ID:\t0x%02X\tRev: 0x%02X\n", ofem_id, ofem_rev);
- printf("OFEM Board Rev:\t0x%02X\tID: 0x%02X\n", ofem_brd_id, ofem_brd_rev);
- }
-
- /* Fix the ack in the bme 32 */
- udelay(5000);
- out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001);
- asm("eieio");
-
-
- return (0);
-}
-
-/*************************************************************************
- * misc_init_f
- *
- * Initialize I2C bus one to gain access to the fans
- ************************************************************************/
-int misc_init_f (void)
-{
- /* Turn on fans 3 & 4 */
- sbcommon_fans();
-
- return (0);
-}
-
-/*************************************************************************
- * misc_init_r
- *
- * Do nothing.
- ************************************************************************/
-int misc_init_r (void)
-{
- unsigned short sernum;
- char envstr[255];
- uchar enetaddr[6];
- KAREF_FPGA_REGS_ST *karef_ps;
- OFEM_FPGA_REGS_ST *ofem_ps;
-
- if(NULL != getenv("secondserial")) {
- puts("secondserial is set, switching to second serial port\n");
- setenv("stderr", "serial1");
- setenv("stdout", "serial1");
- setenv("stdin", "serial1");
- }
-
- setenv("ubrelver", KAREF_U_BOOT_REL_STR);
-
- memset(envstr, 0, 255);
- sprintf (envstr, "Built %s %s by %s",
- U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
- setenv("bldstr", envstr);
- saveenv();
-
- if( getenv("autorecover")) {
- setenv("autorecover", NULL);
- saveenv();
- sernum = sbcommon_get_serial_number();
-
- printf("\nSetting up environment for automatic filesystem recovery\n");
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
- "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
- sernum, sernum);
- setenv("bootargs", envstr);
-
- /*
- * Setup Default boot command
- */
- setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
- "fatload ide 0 8100000 pramdisk;"
- "bootm 8000000 8100000");
-
- printf("Done. Please type allow the system to continue to boot\n");
- }
-
- if( getenv("fakeled")) {
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
- ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
- ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK;
- karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK;
- setenv("bootdelay", "-1");
- saveenv();
- printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
- }
-
-#ifdef CONFIG_HAS_ETH0
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- board_get_enetaddr(0, enetaddr);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH1
- if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
- board_get_enetaddr(1, enetaddr);
- eth_setenv_enetaddr("eth1addr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH2
- if (!eth_getenv_enetaddr("eth2addr", enetaddr)) {
- board_get_enetaddr(2, enetaddr);
- eth_setenv_enetaddr("eth2addr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH3
- if (!eth_getenv_enetaddr("eth3addr", enetaddr)) {
- board_get_enetaddr(3, enetaddr);
- eth_setenv_enetaddr("eth3addr", enetaddr);
- }
-#endif
-
- return (0);
-}
-
-/*************************************************************************
- * ide_set_reset
- ************************************************************************/
-#ifdef CONFIG_IDE_RESET
-void ide_set_reset(int on)
-{
- KAREF_FPGA_REGS_ST *karef_ps;
- /* TODO: ide reset */
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
-
- if (on) {
- karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
- } else {
- karef_ps->reset_ul |= SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
- }
-}
-#endif /* CONFIG_IDE_RESET */
-
-/*************************************************************************
- * fpga_init
- ************************************************************************/
-void fpga_init(void)
-{
- KAREF_FPGA_REGS_ST *karef_ps;
- OFEM_FPGA_REGS_ST *ofem_ps;
- unsigned char ofem_id;
- unsigned long tmp;
-
- /* Ensure we have power all around */
- udelay(500);
-
- karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
- tmp =
- SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK |
- SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK;
-
- karef_ps->reset_ul = tmp;
-
- /*
- * Wait a bit to allow the ofem fpga to get its brains
- */
- udelay(5000);
-
- /*
- * Check to see if the ofem is there
- */
- ofem_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
- >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
- if(0xF != ofem_id) {
- tmp =
- SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK |
- SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK |
- SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK;
-
- ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
- ofem_ps->reset_ul = tmp;
-
- ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT;
- }
-
- karef_ps->control_ul |= 1 << SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT;
-
- asm("eieio");
-
- return;
-}
-
-int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- unsigned short sernum;
- char envstr[255];
-
- sernum = sbcommon_get_serial_number();
-
- memset(envstr, 0, 255);
- /*
- * Setup our ip address
- */
- sprintf(envstr, "10.100.70.%d", sernum);
-
- setenv("ipaddr", envstr);
- /*
- * Setup the host ip address
- */
- setenv("serverip", "10.100.17.10");
-
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
- "rw nfsroot=10.100.17.10:/home/metrobox/mbc70.%d "
- "nfsaddrs=10.100.70.%d:10.100.17.10:10.100.1.1:"
- "255.255.0.0:karef%d.sandburst.com:eth0:none idebus=33",
- sernum, sernum, sernum);
-
- setenv("bootargs_nfs", envstr);
- setenv("bootargs", envstr);
-
- /*
- * Setup CF bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
- "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
- sernum, sernum);
-
- setenv("bootargs_cf", envstr);
-
- /*
- * Setup Default boot command
- */
- setenv("bootcmd_tftp", "tftp 8000000 uImage.karef;bootm 8000000");
- setenv("bootcmd", "tftp 8000000 uImage.karef;bootm 8000000");
-
- /*
- * Setup compact flash boot command
- */
- setenv("bootcmd_cf", "fatload ide 0 8000000 uimage.karef;bootm 8000000");
-
- saveenv();
-
- return(1);
-}
-
-int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- unsigned short sernum;
- char envstr[255];
-
- sernum = sbcommon_get_serial_number();
-
- printf("\nSetting up environment for filesystem recovery\n");
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
- "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none",
- sernum, sernum);
- setenv("bootargs", envstr);
-
- /*
- * Setup Default boot command
- */
-
- setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
- "fatload ide 0 8100000 pramdisk;"
- "bootm 8000000 8100000");
-
- printf("Done. Please type boot<cr>.\nWhen the kernel has booted"
- " please type fsrecover.sh<cr>\n");
-
- return(1);
-}
-
-U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
- "Set environment to factory defaults", "");
-
-U_BOOT_CMD(karecover, 1, 1, karefRecover,
- "Set environment to allow for fs recovery", "");
diff --git a/board/sandburst/karef/karef.h b/board/sandburst/karef/karef.h
deleted file mode 100644
index eb9c314..0000000
--- a/board/sandburst/karef/karef.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef __KAREF_H__
-#define __KAREF_H__
-/*
- * (C) Copyright 2005
- * Sandburst Corporation
- * Travis B. Sawyer
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* Ka Reference Design OFEM FPGA Registers & definitions */
-#include "hal_ka_sc_auto.h"
-#include "hal_ka_of_auto.h"
-
-typedef struct karef_board_id_s {
- const char name[40];
-} KAREF_BOARD_ID_ST, *KAREF_BOARD_ID_PST;
-
-/* SCAN FPGA */
-typedef struct karef_fpga_regs_s
-{
- volatile unsigned long revision_ul; /* Read Only */
- volatile unsigned long reset_ul; /* Read/Write */
- volatile unsigned long interrupt_ul; /* Read Only */
- volatile unsigned long mask_ul; /* Read/Write */
- volatile unsigned long scratch_ul; /* Read/Write */
- volatile unsigned long scrmask_ul; /* Read/Write */
- volatile unsigned long status_ul; /* Read Only */
- volatile unsigned long control_ul; /* Read/Write */
- volatile unsigned long boardinfo_ul; /* Read Only */
- volatile unsigned long scan_from0_ul; /* Read Only */
- volatile unsigned long scan_from1_ul; /* Read Only */
- volatile unsigned long scan_to0_ul; /* Read/Write */
- volatile unsigned long scan_to1_ul; /* Read/Write */
- volatile unsigned long scan_control_ul; /* Read/Write */
- volatile unsigned long pll_control_ul; /* Read/Write */
- volatile unsigned long core_clock_cnt_ul; /* Read/Write */
- volatile unsigned long dr_clock_cnt_ul; /* Read/Write */
- volatile unsigned long spi_clock_cnt_ul; /* Read/Write */
- volatile unsigned long brdout_data_ul; /* Read/Write */
- volatile unsigned long brdout_enable_ul; /* Read/Write */
- volatile unsigned long brdin_data_ul; /* Read Only */
- volatile unsigned long misc_ul; /* Read/Write */
-} __attribute__((packed)) KAREF_FPGA_REGS_ST , * KAREF_FPGA_REGS_PST;
-
-/* OFEM FPGA */
-typedef struct ofem_fpga_regs_s
-{
- volatile unsigned long revision_ul; /* Read Only */
- volatile unsigned long reset_ul; /* Read/Write */
- volatile unsigned long interrupt_ul; /* Read Only */
- volatile unsigned long mask_ul; /* Read/Write */
- volatile unsigned long scratch_ul; /* Read/Write */
- volatile unsigned long scrmask_ul; /* Read/Write */
- volatile unsigned long control_ul; /* Read/Write */
- volatile unsigned long mac_flow_ctrl_ul; /* Read/Write */
-} __attribute__((packed)) OFEM_FPGA_REGS_ST , * OFEM_FPGA_REGS_PST;
-
-
-#endif /* __KAREF_H__ */
diff --git a/board/sandburst/karef/karef_version.h b/board/sandburst/karef/karef_version.h
deleted file mode 100644
index 6c6baee..0000000
--- a/board/sandburst/karef/karef_version.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _KAREF_VERSION_H_
-#define _KAREF_VERSION_H_
-/*
- * Copyright (C) 2005 Sandburst Corporation
- * Travis B. Sawyer
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#define KAREF_U_BOOT_REL_STR "Release 0.0.7"
-#endif
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
deleted file mode 100644
index c17c8b9..0000000
--- a/board/sandburst/karef/u-boot.lds.debug
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- * Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/ppc4xx/start.o (.text)
- board/sandburst/karef/init.o (.text)
- arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
- arch/powerpc/cpu/ppc4xx/traps.o (.text)
- arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
- arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
- arch/powerpc/cpu/ppc4xx/speed.o (.text)
- drivers/net/4xx_enet.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
- lib/zlib.o (.text)
-
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/sandburst/metrobox/Kconfig b/board/sandburst/metrobox/Kconfig
deleted file mode 100644
index 4a771ef..0000000
--- a/board/sandburst/metrobox/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_METROBOX
-
-config SYS_BOARD
- default "metrobox"
-
-config SYS_VENDOR
- default "sandburst"
-
-config SYS_CONFIG_NAME
- default "METROBOX"
-
-endif
diff --git a/board/sandburst/metrobox/MAINTAINERS b/board/sandburst/metrobox/MAINTAINERS
deleted file mode 100644
index 71d18f9..0000000
--- a/board/sandburst/metrobox/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-METROBOX BOARD
-#M: Travis Sawyer <travis.sawyer at sandburst.com>
-S: Orphan (since 2014-03)
-F: board/sandburst/metrobox/
-F: include/configs/METROBOX.h
-F: configs/METROBOX_defconfig
diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile
deleted file mode 100644
index 2c1028b..0000000
--- a/board/sandburst/metrobox/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2005
-# Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# TBS: add for debugging purposes
-ccflags-y += -DBUILDUSER='"$(shell whoami)"'
-
-obj-y = metrobox.o ../common/flash.o ../common/sb_common.o
-extra-y += init.o
diff --git a/board/sandburst/metrobox/config.mk b/board/sandburst/metrobox/config.mk
deleted file mode 100644
index 23190c8..0000000
--- a/board/sandburst/metrobox/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2005
-# Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/sandburst/metrobox/hal_xc_auto.h b/board/sandburst/metrobox/hal_xc_auto.h
deleted file mode 100644
index c99b38c..0000000
--- a/board/sandburst/metrobox/hal_xc_auto.h
+++ /dev/null
@@ -1,553 +0,0 @@
-/* ****************************************************************
- * Common defs for reg spec for chip xc
- * Auto-generated by trex2: DO NOT HAND-EDIT!!
- * ****************************************************************
- */
-
-#ifndef HAL_XC_AUTO_H
-#define HAL_XC_AUTO_H
-
-/* ----------------------------------------------------------------
- * For block: 'xcvr_cntl'
- */
-
-/* ---- Block instance addressing (for block-select) */
-#define XCVR_CNTL_BLOCK_ADDR_BIT_L 6
-#define XCVR_CNTL_BLOCK_ADDR_BIT_H 9
-#define XCVR_CNTL_BLOCK_ADDR_WIDTH 4
-
-#define XCVR_CNTL_ADDR 0x0
-
-/* ---- Reg addressing (within block) */
-#define XCVR_CNTL_REG_ADDR_BIT_L 2
-#define XCVR_CNTL_REG_ADDR_BIT_H 5
-#define XCVR_CNTL_REG_ADDR_WIDTH 4
-
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_REVISION */
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_OFFSET 0x000
-#ifndef SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_RESET */
-#define SAND_HAL_XC_XCVR_CNTL_RESET_OFFSET 0x004
-#ifndef SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_STATUS */
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_OFFSET 0x008
-#ifndef SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_CNTL */
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OFFSET 0x01c
-#ifndef SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_BRD_INFO */
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_OFFSET 0x020
-#ifndef SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_MAC_FLOW_CTL */
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_OFFSET 0x024
-#ifndef SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_INTERRUPT */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OFFSET 0x00c
-#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_INTERRUPT_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OFFSET 0x010
-#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_SCRATCH */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_OFFSET 0x014
-#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_LSB 0
-
-/* ================================================================
- * ---- Register XC_XCVR_CNTL_SCRATCH_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_OFFSET 0x018
-#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK 0x000
-#endif
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_LSB 0
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_REVISION */
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK 0x0000ff00
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT 8
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MSB 15
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_LSB 8
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK 0x000000ff
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MSB 7
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_RESET */
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK 0x00020000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_SHIFT 17
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MSB 17
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_LSB 17
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK 0x00010000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_SHIFT 16
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MSB 16
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_LSB 16
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK 0x00008000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_SHIFT 15
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MSB 15
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_LSB 15
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK 0x00004000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_SHIFT 14
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MSB 14
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_LSB 14
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK 0x00002000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_SHIFT 13
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MSB 13
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_LSB 13
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK 0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_SHIFT 12
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MSB 12
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_LSB 12
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK 0x00000800
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_SHIFT 11
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MSB 11
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_LSB 11
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK 0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_SHIFT 10
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MSB 10
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_LSB 10
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK 0x00000200
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_SHIFT 9
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MSB 9
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_LSB 9
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK 0x00000100
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_SHIFT 8
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MSB 8
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_LSB 8
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK 0x00000080
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_SHIFT 7
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MSB 7
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_LSB 7
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK 0x00000040
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_SHIFT 6
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MSB 6
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_LSB 6
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK 0x00000020
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_SHIFT 5
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MSB 5
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_LSB 5
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK 0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_SHIFT 4
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MSB 4
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_LSB 4
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK 0x00000008
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_SHIFT 3
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MSB 3
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_LSB 3
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK 0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_SHIFT 2
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MSB 2
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_LSB 2
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK 0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_SHIFT 1
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MSB 1
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_LSB 1
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MSB 0
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_STATUS */
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MASK 0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_SHIFT 2
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MSB 2
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_LSB 2
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MASK 0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_SHIFT 1
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MSB 1
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_LSB 1
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MASK 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MSB 0
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_CNTL */
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MASK 0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_SHIFT 10
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MSB 10
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_LSB 10
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MASK 0x00000300
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_SHIFT 8
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MSB 9
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_LSB 8
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK 0x000000c0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT 6
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MSB 7
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_LSB 6
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MASK 0x00000030
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_SHIFT 4
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MSB 5
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_LSB 4
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MASK 0x0000000c
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_SHIFT 2
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MSB 3
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_LSB 2
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MASK 0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_SHIFT 1
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MSB 1
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_LSB 1
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MASK 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MSB 0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_DEFAULT 0x00000001
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_BRD_INFO */
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK 0x000000f0
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT 4
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MSB 7
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_LSB 4
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK 0x00000003
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MSB 1
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_MAC_FLOW_CTL */
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MASK 0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_SHIFT 12
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MSB 12
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_LSB 12
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MASK 0x00000f00
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_SHIFT 8
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MSB 11
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_LSB 8
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK 0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT 4
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB 4
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB 4
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK 0x0000000f
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB 3
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_INTERRUPT */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MASK 0x00002000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_SHIFT 13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MSB 13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_LSB 13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MASK 0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_SHIFT 12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MSB 12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_LSB 12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MASK 0x00000800
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_SHIFT 11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MSB 11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_LSB 11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MASK 0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_SHIFT 10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MSB 10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_LSB 10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MASK 0x00000200
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_SHIFT 9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MSB 9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_LSB 9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MASK 0x00000100
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_SHIFT 8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MSB 8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_LSB 8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MASK 0x00000080
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_SHIFT 7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MSB 7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_LSB 7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MASK 0x00000040
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_SHIFT 6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MSB 6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_LSB 6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MASK 0x00000020
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_SHIFT 5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MSB 5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_LSB 5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MASK 0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_SHIFT 4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MSB 4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_LSB 4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MASK 0x00000008
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_SHIFT 3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MSB 3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_LSB 3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MASK 0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_SHIFT 2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MSB 2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_LSB 2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MASK 0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_SHIFT 1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MSB 1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_LSB 1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_DEFAULT 0x00000000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MASK 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MSB 0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_INTERRUPT_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK 0x00002000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT 13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB 13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB 13
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK 0x00001000
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT 12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB 12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB 12
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK 0x00000800
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT 11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB 11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB 11
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK 0x00000400
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT 10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB 10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB 10
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK 0x00000200
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT 9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB 9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB 9
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK 0x00000100
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT 8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB 8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB 8
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK 0x00000080
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT 7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB 7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB 7
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK 0x00000040
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT 6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB 6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB 6
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK 0x00000020
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT 5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB 5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB 5
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK 0x00000010
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT 4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB 4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB 4
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK 0x00000008
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT 3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB 3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB 3
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK 0x00000004
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT 2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB 2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB 2
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK 0x00000002
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT 1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB 1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB 1
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK 0x00000001
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB 0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT 0x00000001
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_SCRATCH */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_DEFAULT 0x00000000
-
-/* ================================================================
- * Field info for register XC_XCVR_CNTL_SCRATCH_MASK */
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
-#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff
-
-#endif /* matches #ifndef HAL_XC_AUTO_H */
diff --git a/board/sandburst/metrobox/init.S b/board/sandburst/metrobox/init.S
deleted file mode 100644
index 13e340e..0000000
--- a/board/sandburst/metrobox/init.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-* Copyright (C) 2005
-* Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- * Pointer to the table is returned in r1
- *
- *************************************************************************/
-
- .section .bootpg,"ax"
- .globl tlbtab
-
-tlbtab:
- tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG)
- tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG)
- tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_IG)
- tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_RWX | SA_IG )
- tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG )
- tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG )
- tlbtab_end
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
deleted file mode 100644
index 290fa02..0000000
--- a/board/sandburst/metrobox/metrobox.c
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- * Copyright (c) 2005
- * Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include "metrobox.h"
-#include "metrobox_version.h"
-#include <timestamp.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include "../common/sb_common.h"
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
-#include <net.h>
-#endif
-
-void fpga_init (void);
-
-METROBOX_BOARD_ID_ST board_id_as[] =
-{ {"Undefined"}, /* Not specified */
- {"2x10Gb"}, /* 2 ports, 10 GbE */
- {"20x1Gb"}, /* 20 ports, 1 GbE */
- {"Reserved"}, /* Reserved for future use */
-};
-
-/*************************************************************************
- * board_early_init_f
- *
- * Setup chip selects, initialize the Opto-FPGA, initialize
- * interrupt polarity and triggers.
- ************************************************************************/
-int board_early_init_f (void)
-{
- ppc440_gpio_regs_t *gpio_regs;
-
- /* Enable GPIO interrupts */
- mtsdr(SDR0_PFC0, 0x00103E00);
-
- /* Setup access for LEDs, and system topology info */
- gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
- gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
- gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS;
-
- /* Turn on all the leds for now */
- gpio_regs->out = SBCOMMON_GPIO_LEDS;
-
- /*--------------------------------------------------------------------+
- | Initialize EBC CONFIG
- +-------------------------------------------------------------------*/
- mtebc(EBC0_CFG,
- EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE |
- EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
- EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
- EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE |
- EBC_CFG_PR_32);
-
- /*--------------------------------------------------------------------+
- | 1/2 MB FLASH. Initialize bank 0 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB0AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
- /*--------------------------------------------------------------------+
- | 8KB NVRAM/RTC. Initialize bank 1 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB1AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
-
- /*--------------------------------------------------------------------+
- | Compact Flash, uses 2 Chip Selects (2 & 6)
- +-------------------------------------------------------------------*/
- mtebc(PB2AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
- /*--------------------------------------------------------------------+
- | OPTO & OFEM FPGA. Initialize bank 3 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB3AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48200000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- | MAC A for metrobox
- | MAC A & B for Kamino. OFEM FPGA decodes the addresses
- | Initialize bank 4 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB4AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- | Metrobox MAC B Initialize bank 5 with default values.
- | KA REF FPGA Initialize bank 5 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB5AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48700000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- | Compact Flash, uses 2 Chip Selects (2 & 6)
- +-------------------------------------------------------------------*/
- mtebc(PB6AP,
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
- EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
- EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
- EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
- EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
- EBC_BXAP_PEN_DISABLED);
-
- mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
-
- /*--------------------------------------------------------------------+
- | BME-32. Initialize bank 7 with default values.
- +-------------------------------------------------------------------*/
- mtebc(PB7AP,
- EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
- EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
- EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
- EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
- EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
-
- mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) |
- EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
-
- /*--------------------------------------------------------------------+
- * Setup the interrupt controller polarities, triggers, etc.
- +-------------------------------------------------------------------*/
- /*
- * Because of the interrupt handling rework to handle 440GX interrupts
- * with the common code, we needed to change names of the UIC registers.
- * Here the new relationship:
- *
- * U-Boot name 440GX name
- * -----------------------
- * UIC0 UICB0
- * UIC1 UIC0
- * UIC2 UIC1
- * UIC3 UIC2
- */
- mtdcr (UIC1SR, 0xffffffff); /* clear all */
- mtdcr (UIC1ER, 0x00000000); /* disable all */
- mtdcr (UIC1CR, 0x00000000); /* all non- critical */
- mtdcr (UIC1PR, 0xfffffe03); /* polarity */
- mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */
- mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC1SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC2SR, 0xffffffff); /* clear all */
- mtdcr (UIC2ER, 0x00000000); /* disable all */
- mtdcr (UIC2CR, 0x00000000); /* all non-critical */
- mtdcr (UIC2PR, 0xffffc8ff); /* polarity */
- mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */
- mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC2SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC3SR, 0xffffffff); /* clear all */
- mtdcr (UIC3ER, 0x00000000); /* disable all */
- mtdcr (UIC3CR, 0x00000000); /* all non-critical */
- mtdcr (UIC3PR, 0xffff83ff); /* polarity */
- mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */
- mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (UIC3SR, 0xffffffff); /* clear all */
-
- mtdcr (UIC0SR, 0xfc000000); /* clear all */
- mtdcr (UIC0ER, 0x00000000); /* disable all */
- mtdcr (UIC0CR, 0x00000000); /* all non-critical */
- mtdcr (UIC0PR, 0xfc000000);
- mtdcr (UIC0TR, 0x00000000);
- mtdcr (UIC0VR, 0x00000001);
-
- fpga_init();
-
- return 0;
-}
-
-/*************************************************************************
- * checkboard
- *
- * Dump pertinent info to the console
- ************************************************************************/
-int checkboard (void)
-{
- sys_info_t sysinfo;
- unsigned char brd_rev, brd_id;
- unsigned short sernum;
- unsigned char opto_rev, opto_id;
- OPTO_FPGA_REGS_ST *opto_ps;
-
- opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
-
- opto_rev = (unsigned char)((opto_ps->revision_ul &
- SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
- >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
-
- opto_id = (unsigned char)((opto_ps->revision_ul &
- SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK)
- >> SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT);
-
- brd_rev = (unsigned char)((opto_ps->boardinfo_ul &
- SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK)
- >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT);
-
- brd_id = (unsigned char)((opto_ps->boardinfo_ul &
- SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK)
- >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT);
-
- get_sys_info (&sysinfo);
-
- sernum = sbcommon_get_serial_number();
- printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum);
- printf ("%s\n", METROBOX_U_BOOT_REL_STR);
-
- printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
- if (sbcommon_get_master()) {
- printf("Slot 0 - Master\nSlave board");
- if (sbcommon_secondary_present())
- printf(" present\n");
- else
- printf(" not detected\n");
- } else {
- printf("Slot 1 - Slave\n\n");
- }
-
- printf ("OptoFPGA ID:\t0x%02X\tRev: 0x%02X\n", opto_id, opto_rev);
- printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id].name);
-
- /* Fix the ack in the bme 32 */
- udelay(5000);
- out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001);
- asm("eieio");
-
-
- return (0);
-}
-
-/*************************************************************************
- * misc_init_f
- *
- * Initialize I2C bus one to gain access to the fans
- ************************************************************************/
-int misc_init_f (void)
-{
- /* Turn on fans */
- sbcommon_fans();
-
- return (0);
-}
-
-/*************************************************************************
- * misc_init_r
- *
- * Do nothing.
- ************************************************************************/
-int misc_init_r (void)
-{
- unsigned short sernum;
- char envstr[255];
- uchar enetaddr[6];
- unsigned char opto_rev;
- OPTO_FPGA_REGS_ST *opto_ps;
-
- opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
-
- if(NULL != getenv("secondserial")) {
- puts("secondserial is set, switching to second serial port\n");
- setenv("stderr", "serial1");
- setenv("stdout", "serial1");
- setenv("stdin", "serial1");
- }
-
- setenv("ubrelver", METROBOX_U_BOOT_REL_STR);
-
- memset(envstr, 0, 255);
- sprintf (envstr, "Built %s %s by %s",
- U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
- setenv("bldstr", envstr);
- saveenv();
-
- if( getenv("autorecover")) {
- setenv("autorecover", NULL);
- saveenv();
- sernum = sbcommon_get_serial_number();
-
- printf("\nSetting up environment for automatic filesystem recovery\n");
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
- sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
- "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
- sernum, sernum);
- setenv("bootargs", envstr);
-
- /*
- * Setup Default boot command
- */
- setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
- "fatload ide 0 8100000 pramdisk;"
- "bootm 8000000 8100000");
-
- printf("Done. Please type allow the system to continue to boot\n");
- }
-
- if( getenv("fakeled")) {
- setenv("bootdelay", "-1");
- saveenv();
- printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
- opto_rev = (unsigned char)((opto_ps->revision_ul &
- SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
- >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
-
- if(0x12 <= opto_rev) {
- opto_ps->control_ul &= ~ SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK;
- }
- }
-
-#ifdef CONFIG_HAS_ETH0
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- board_get_enetaddr(0, enetaddr);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH1
- if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
- board_get_enetaddr(1, enetaddr);
- eth_setenv_enetaddr("eth1addr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH2
- if (!eth_getenv_enetaddr("eth2addr", enetaddr)) {
- board_get_enetaddr(2, enetaddr);
- eth_setenv_enetaddr("eth2addr", enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH3
- if (!eth_getenv_enetaddr("eth3addr", enetaddr)) {
- board_get_enetaddr(3, enetaddr);
- eth_setenv_enetaddr("eth3addr", enetaddr);
- }
-#endif
-
- return (0);
-}
-
-/*************************************************************************
- * ide_set_reset
- ************************************************************************/
-#ifdef CONFIG_IDE_RESET
-void ide_set_reset(int on)
-{
- OPTO_FPGA_REGS_ST *opto_ps;
- opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
-
- if (on) { /* assert RESET */
- opto_ps->reset_ul &= ~SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
- } else { /* release RESET */
- opto_ps->reset_ul |= SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
- }
-}
-#endif /* CONFIG_IDE_RESET */
-
-/*************************************************************************
- * fpga_init
- ************************************************************************/
-void fpga_init(void)
-{
- OPTO_FPGA_REGS_ST *opto_ps;
- unsigned char opto_rev;
- unsigned long tmp;
-
- /* Ensure we have power all around */
- udelay(500);
-
- /*
- * Take appropriate hw bits out of reset
- */
- opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
-
- tmp =
- SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK |
- SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK;
- opto_ps->reset_ul = tmp;
- /*
- * Turn on the 'Slow Blink' for the System Error Led.
- * Ensure FPGA rev is up to at least rev 0x12
- */
- opto_rev = (unsigned char)((opto_ps->revision_ul &
- SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
- >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
- if(0x12 <= opto_rev) {
- opto_ps->control_ul |= 1 << SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT;
- }
-
- asm("eieio");
-
- return;
-}
-
-int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- unsigned short sernum;
- char envstr[255];
-
- sernum = sbcommon_get_serial_number();
-
- memset(envstr, 0, 255);
- /*
- * Setup our ip address
- */
- sprintf(envstr, "10.100.60.%d", sernum);
-
- setenv("ipaddr", envstr);
- /*
- * Setup the host ip address
- */
- setenv("serverip", "10.100.17.10");
-
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
-
- sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
- "rw nfsroot=10.100.17.10:/home/metrobox/mbc%d "
- "nfsaddrs=10.100.60.%d:10.100.17.10:10.100.1.1"
- ":255.255.0.0:metrobox%d.sandburst.com:eth0:none idebus=33",
- sernum, sernum, sernum);
-
- setenv("bootargs_nfs", envstr);
- setenv("bootargs", envstr);
-
- /*
- * Setup CF bootargs
- */
- memset(envstr, 0, 255);
- sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
- "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
- sernum, sernum);
-
- setenv("bootargs_cf", envstr);
-
- /*
- * Setup Default boot command
- */
- setenv("bootcmd_tftp", "tftp 8000000 pImage.metrobox;bootm 8000000");
- setenv("bootcmd", "tftp 8000000 pImage.metrobox;bootm 8000000");
-
- /*
- * Setup compact flash boot command
- */
- setenv("bootcmd_cf", "fatload ide 0 8000000 pimage.metrobox;bootm 8000000");
-
- saveenv();
-
-
- return(1);
-}
-
-int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- unsigned short sernum;
- char envstr[255];
-
- sernum = sbcommon_get_serial_number();
-
- printf("\nSetting up environment for filesystem recovery\n");
- /*
- * Setup default bootargs
- */
- memset(envstr, 0, 255);
- sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
- "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none",
- sernum, sernum);
-
- setenv("bootargs", envstr);
-
- /*
- * Setup Default boot command
- */
- setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
- "fatload ide 0 8100000 pramdisk;"
- "bootm 8000000 8100000");
-
- printf("Done. Please type boot<cr>.\nWhen the kernel has booted"
- " please type fsrecover.sh<cr>\n");
-
- return(1);
-}
-
-U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
- "Set environment to factory defaults", "");
-
-U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
- "Set environment to allow for fs recovery", "");
diff --git a/board/sandburst/metrobox/metrobox.h b/board/sandburst/metrobox/metrobox.h
deleted file mode 100644
index d64f496..0000000
--- a/board/sandburst/metrobox/metrobox.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __METROBOX_H__
-#define __METROBOX_H__
-/*
- * (C) Copyright 2005
- * Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-typedef struct metrobox_board_id_s {
- const char name[40];
-} METROBOX_BOARD_ID_ST, *METROBOX_BOARD_ID_PST;
-
-
-/* Metrobox Opto-FPGA registers and definitions */
-#include "hal_xc_auto.h"
-typedef struct opto_fpga_regs_s {
- volatile unsigned long revision_ul; /* Read Only */
- volatile unsigned long reset_ul; /* Read/Write */
- volatile unsigned long status_ul; /* Read Only */
- volatile unsigned long interrupt_ul; /* Read Only */
- volatile unsigned long mask_ul; /* Read/Write */
- volatile unsigned long scratch_ul; /* Read/Write */
- volatile unsigned long scrmask_ul; /* Read/Write */
- volatile unsigned long control_ul; /* Read/Write */
- volatile unsigned long boardinfo_ul; /* Read Only */
-} __attribute__ ((packed)) OPTO_FPGA_REGS_ST , *OPTO_FPGA_REGS_PST;
-
-#endif /* __METROBOX_H__ */
diff --git a/board/sandburst/metrobox/metrobox_version.h b/board/sandburst/metrobox/metrobox_version.h
deleted file mode 100644
index 8264f56..0000000
--- a/board/sandburst/metrobox/metrobox_version.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _METROBOX_VERSION_H_
-#define _METROBOX_VERSION_H_
-/*
- * (C) Copyright 2005
- * Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#define METROBOX_U_BOOT_REL_STR "Release 2.0.3"
-
-#endif
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
deleted file mode 100644
index 7ff09c0..0000000
--- a/board/sandburst/metrobox/u-boot.lds.debug
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- * Travis B. Sawyer, Sandburst Corporation, tsawyer at sandburst.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/ppc4xx/start.o (.text)
- board/sandburst/metrobox/init.o (.text)
- arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
- arch/powerpc/cpu/ppc4xx/traps.o (.text)
- arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
- arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
- arch/powerpc/cpu/ppc4xx/speed.o (.text)
- drivers/net/4xx_enet.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
- lib/zlib.o (.text)
-
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/configs/KAREF_defconfig b/configs/KAREF_defconfig
deleted file mode 100644
index fcca3c9..0000000
--- a/configs/KAREF_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_KAREF=y
diff --git a/configs/METROBOX_defconfig b/configs/METROBOX_defconfig
deleted file mode 100644
index 14b471a..0000000
--- a/configs/METROBOX_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_METROBOX=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 2f5034f..92ba1e4 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+KAREF powerpc ppc4xx - - Travis Sawyer <travis.sawyer at sandburst.com>
+METROBOX powerpc ppc4xx - - Travis Sawyer <travis.sawyer at sandburst.com>
PK1C20 nios2 - 70fbc461 2014-08-24 Scott McNutt <smcnutt at psyent.com>
PCI5441 nios2 - 70fbc461 2014-08-24 Scott McNutt <smcnutt at psyent.com>
flagadm powerpc mpc8xx aec6f8c5 2014-08-22 Kári Davíðsson <kd at flaga.is>
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
deleted file mode 100644
index 546b725..0000000
--- a/include/configs/KAREF.h
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * (C) Copyright 2004 Sandburst Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************************************
- * KAMINOREFDES.h - configuration for the Sandburst Kamino Reference
- * design.
- ***********************************************************************/
-
-/*
- * $Id: KAREF.h,v 1.6 2005/06/03 15:05:25 tsawyer Exp $
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */
-#define CONFIG_440GX 1 /* Specifc GX support */
-#define CONFIG_440 1 /* ... PPC440 family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
-#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF80000
-
-#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/
-#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
-
-#define CONFIG_VERY_BIG_RAM 1
-#define CONFIG_VERSION_VARIABLE
-
-#define CONFIG_IDENT_STRING " Sandburst Kamino Reference Design"
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */
-#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
-#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
-#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
-#define CONFIG_SYS_KAREF_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000)
-#define CONFIG_SYS_OFEM_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08400000)
-#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000)
-#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
-
-/* Here for completeness */
-#define CONFIG_SYS_OFEMAC_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08600000)
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_TEMP_STACK_OCM 1
-#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_CONS_INDEX 1 /* Use UART0 */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
-#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
-#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
-#define CONFIG_SYS_I2C_PPC4XX_CH1
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F
-#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
-
-#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR)
-
-#define CONFIG_BOOTDELAY 5 /* 5 second autoboot */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*-----------------------------------------------------------------------
- * Networking
- *----------------------------------------------------------------------*/
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
-#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
-#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
-#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
-#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
-#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
-#define CONFIG_PHY_RESET_DELAY 1000
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
-#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
-#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-
-
-/* Include NetConsole support */
-#define CONFIG_NETCONSOLE
-
-/* Include auto complete with tabs */
-#define CONFIG_AUTO_COMPLETE 1
-#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "KaRefDes=> " /* Monitor Command Prompt */
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */
-
-
-/*-----------------------------------------------------------------------
- * Console Buffer
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
- /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
-
-/*-----------------------------------------------------------------------
- * Memory Test
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/*-----------------------------------------------------------------------
- * Compact Flash (in true IDE mode)
- *----------------------------------------------------------------------*/
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-
-#define CONFIG_IDE_RESET /* reset for ide supported */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
-
-#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride
- to get to the correct offset */
-#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
-
-/*-----------------------------------------------------------------------
- * PCI
- *----------------------------------------------------------------------*/
-/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
-#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE)
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
-#endif
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
deleted file mode 100644
index 69ab5bb..0000000
--- a/include/configs/METROBOX.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * (C) Copyright 2004 Sandburst Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************************************
- * METROBOX.h - configuration Sandburst MetroBox
- ***********************************************************************/
-
-/*
- * $Id: METROBOX.h,v 1.21 2005/06/03 15:05:25 tsawyer Exp $
- *
- *
- * $Log: METROBOX.h,v $
- * Revision 1.21 2005/06/03 15:05:25 tsawyer
- * MB rev 2.0.3 KA rev 0.0.7. Add CONFIG_VERSION_VARIABLE, Add fakeled to MB
- *
- * Revision 1.20 2005/04/11 20:51:11 tsawyer
- * fix ethernet
- *
- * Revision 1.19 2005/04/06 15:13:36 tsawyer
- * Update appropriate files to coincide with u-boot 1.1.3
- *
- * Revision 1.18 2005/03/10 14:16:02 tsawyer
- * add def'n for cis8201 short etch option.
- *
- * Revision 1.17 2005/03/09 19:49:51 tsawyer
- * Remove KGDB to allow use of 2nd serial port
- *
- * Revision 1.16 2004/12/02 19:00:23 tsawyer
- * Add misc_init_f to turn on i2c-1 and all four fans before sdram init
- *
- * Revision 1.15 2004/09/15 18:04:12 tsawyer
- * add multiple serial port support
- *
- * Revision 1.14 2004/09/03 15:27:51 tsawyer
- * All metrobox boards are at 66.66 sys clock
- *
- * Revision 1.13 2004/08/05 20:27:46 tsawyer
- * Remove system ace definitions, add net console support
- *
- * Revision 1.12 2004/07/29 20:00:13 tsawyer
- * Add i2c bus 1
- *
- * Revision 1.11 2004/07/21 13:44:18 tsawyer
- * SystemACE is out, CF direct to local bus is in
- *
- * Revision 1.10 2004/06/29 19:08:55 tsawyer
- * Add CONFIG_MISC_INIT_R
- *
- * Revision 1.9 2004/06/28 21:30:53 tsawyer
- * Fix default BOOTARGS
- *
- * Revision 1.8 2004/06/17 15:51:08 tsawyer
- * auto complete
- *
- * Revision 1.7 2004/06/17 15:08:49 tsawyer
- * Add autocomplete
- *
- * Revision 1.6 2004/06/15 12:33:57 tsawyer
- * debugging checkpoint
- *
- * Revision 1.5 2004/06/12 19:48:28 tsawyer
- * Debugging checkpoint
- *
- * Revision 1.4 2004/06/02 13:03:06 tsawyer
- * Fix eth addrs
- *
- * Revision 1.3 2004/05/18 19:56:10 tsawyer
- * Change default bootcommand to pImage.metrobox
- *
- * Revision 1.2 2004/05/18 14:13:44 tsawyer
- * Add bringup values for bootargs and bootcommand.
- * Remove definition of ipaddress and serverip addresses.
- *
- * Revision 1.1 2004/04/16 15:08:54 tsawyer
- * Initial Revision
- *
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_METROBOX 1 /* Board is Metrobox */
-#define CONFIG_440GX 1 /* Specifc GX support */
-#define CONFIG_440 1 /* ... PPC440 family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
-#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF80000
-
-#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/
-#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
-
-#define CONFIG_VERY_BIG_RAM 1
-#define CONFIG_VERSION_VARIABLE
-
-#define CONFIG_IDENT_STRING " Sandburst Metrobox"
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */
-#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
-#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
-#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
-#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000)
-#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000)
-#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_TEMP_STACK_OCM 1
-#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_CONS_INDEX 1 /* Use UART0 */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
-#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
-#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
-#define CONFIG_SYS_I2C_PPC4XX_CH1
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F
-#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
-
-#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR)
-
-#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none "
-#define CONFIG_BOOTCOMMAND "tftp 8000000 pImage.metrobox;bootm 8000000"
-#define CONFIG_BOOTDELAY 5 /* disable autoboot */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*-----------------------------------------------------------------------
- * Networking
- *----------------------------------------------------------------------*/
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
-#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
-#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
-#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
-#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
-#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
-#define CONFIG_PHY_RESET_DELAY 1000
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
-#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
-#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-
-
-/* Include NetConsole support */
-#define CONFIG_NETCONSOLE
-
-/* Include auto complete with tabs */
-#define CONFIG_AUTO_COMPLETE 1
-#define CONFIG_AUTO_COMPLETE 1
-#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "MetroBox=> " /* Monitor Command Prompt */
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */
-
-
-/*-----------------------------------------------------------------------
- * Console Buffer
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
- /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
-
-/*-----------------------------------------------------------------------
- * Memory Test
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/*-----------------------------------------------------------------------
- * Compact Flash (in true IDE mode)
- *----------------------------------------------------------------------*/
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-
-#define CONFIG_IDE_RESET /* reset for ide supported */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
-
-#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride
- to get to the correct offset */
-#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
-
-/*-----------------------------------------------------------------------
- * PCI
- *----------------------------------------------------------------------*/
-/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
-#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE)
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
-#endif
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */
-
-#endif /* __CONFIG_H */
--
1.9.1
More information about the U-Boot
mailing list