[U-Boot] [PATCH v3 3/5] imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board

[Stefano Babic]

On 09/09/2014 04:16, Ye.Li wrote:
> This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
> shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
> pin-pin compatible with i.MX6Q.
> 
> The patch also support the DDR 32-BIT mode option. Please define
> CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
> mode.But due to the board design, it's 64bit DDR buswidth physically,
> so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.
> 
> Signed-off-by: Ye.Li <B37916 at freescale.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================