[U-Boot] [PATCH v3 18/29] spi: Use error return value in sf_ops
Simon Glass
sjg at chromium.org
Mon Sep 29 21:35:15 CEST 2014
Adjust spi_flash_probe_slave() to return an error value instead of a
pointer so we get the correct error return.
Have the caller allocate memory for spi_flash to simplify error handling,
and also so that driver model can use its existing allocated memory.
Add a spi.h include in the sf_params file.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v3: None
Changes in v2: None
drivers/mtd/spi/sf_probe.c | 90 +++++++++++++++++++++++++++++-----------------
1 file changed, 57 insertions(+), 33 deletions(-)
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 4d148d1..212a825 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -9,6 +9,7 @@
*/
#include <common.h>
+#include <errno.h>
#include <fdtdec.h>
#include <malloc.h>
#include <spi.h>
@@ -95,15 +96,15 @@ static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
}
}
-static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
- u8 *idcode)
+static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
+ struct spi_flash *flash)
{
const struct spi_flash_params *params;
- struct spi_flash *flash;
u8 cmd;
u16 jedec = idcode[1] << 8 | idcode[2];
u16 ext_jedec = idcode[3] << 8 | idcode[4];
+ /* Validate params from spi_flash_params table */
params = spi_flash_params_table;
for (; params->name != NULL; params++) {
if ((params->jedec >> 16) == idcode[0]) {
@@ -120,13 +121,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
printf("SF: Unsupported flash IDs: ");
printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
idcode[0], jedec, ext_jedec);
- return NULL;
- }
-
- flash = calloc(1, sizeof(*flash));
- if (!flash) {
- debug("SF: Failed to allocate spi_flash\n");
- return NULL;
+ return -EPROTONOSUPPORT;
}
/* Assign spi data */
@@ -227,15 +222,18 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
#ifdef CONFIG_SPI_FLASH_BAR
u8 curr_bank = 0;
if (flash->size > SPI_FLASH_16MB_BOUN) {
+ int ret;
+
flash->bank_read_cmd = (idcode[0] == 0x01) ?
CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
flash->bank_write_cmd = (idcode[0] == 0x01) ?
CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
- if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
- &curr_bank, 1)) {
+ ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+ &curr_bank, 1);
+ if (ret) {
debug("SF: fail to read bank addr register\n");
- return NULL;
+ return ret;
}
flash->bank_curr = curr_bank;
} else {
@@ -250,7 +248,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
spi_flash_cmd_write_status(flash, 0);
#endif
- return flash;
+ return 0;
}
#ifdef CONFIG_OF_CONTROL
@@ -309,23 +307,29 @@ static int spi_enable_wp_pin(struct spi_flash *flash)
}
#endif
-static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
+/**
+ * spi_flash_probe_slave() - Probe for a SPI flash device on a bus
+ *
+ * @spi: Bus to probe
+ * @flashp: Pointer to place to put flash info, which may be NULL if the
+ * space should be allocated
+ */
+int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
{
- struct spi_flash *flash = NULL;
u8 idcode[5];
int ret;
/* Setup spi_slave */
if (!spi) {
printf("SF: Failed to set up slave\n");
- return NULL;
+ return -ENODEV;
}
/* Claim spi bus */
ret = spi_claim_bus(spi);
if (ret) {
debug("SF: Failed to claim SPI bus: %d\n", ret);
- goto err_claim_bus;
+ return ret;
}
/* Read the ID codes */
@@ -340,10 +344,10 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
print_buffer(0, idcode, 1, sizeof(idcode), 0);
#endif
- /* Validate params from spi_flash_params table */
- flash = spi_flash_validate_params(spi, idcode);
- if (!flash)
+ if (spi_flash_validate_params(spi, idcode, flash)) {
+ ret = -EINVAL;
goto err_read_id;
+ }
/* Set the quad enable bit - only for quad commands */
if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
@@ -351,13 +355,15 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
(flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
if (spi_flash_set_qeb(flash, idcode[0])) {
debug("SF: Fail to set QEB for %02x\n", idcode[0]);
- return NULL;
+ ret = -EINVAL;
+ goto err_read_id;
}
}
#ifdef CONFIG_OF_CONTROL
if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
debug("SF: FDT decode error\n");
+ ret = -EINVAL;
goto err_read_id;
}
#endif
@@ -385,32 +391,50 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
/* Release spi bus */
spi_release_bus(spi);
- return flash;
+ return 0;
err_read_id:
spi_release_bus(spi);
-err_claim_bus:
- spi_free_slave(spi);
- return NULL;
+ return ret;
+}
+
+static struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus)
+{
+ struct spi_flash *flash;
+
+ /* Allocate space if needed (not used by sf-uclass */
+ flash = calloc(1, sizeof(*flash));
+ if (!flash) {
+ debug("SF: Failed to allocate spi_flash\n");
+ return NULL;
+ }
+
+ if (spi_flash_probe_slave(bus, flash)) {
+ spi_free_slave(bus);
+ free(flash);
+ return NULL;
+ }
+
+ return flash;
}
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{
- struct spi_slave *spi;
+ struct spi_slave *bus;
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
- return spi_flash_probe_slave(spi);
+ bus = spi_setup_slave(busnum, cs, max_hz, spi_mode);
+ return spi_flash_probe_tail(bus);
}
#ifdef CONFIG_OF_SPI_FLASH
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
int spi_node)
{
- struct spi_slave *spi;
+ struct spi_slave *bus;
- spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
- return spi_flash_probe_slave(spi);
+ bus = spi_setup_slave_fdt(blob, slave_node, spi_node);
+ return spi_flash_probe_tail(bus);
}
#endif
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list