[U-Boot] [PATCH 0/5] omap3: overo: Add foreign expansion board support

[Stefan Herbrechtsmeier]

Am 16.09.2014 um 17:51 schrieb Stefan Herbrechtsmeier:
> At the moment the boot loader use a common configuration for all Gumstix
> Overo expansion boards. This also includes configuration of all inputs
> and outputs even if they aren't used by the boot loader. Because the
> Overo module could be used on foreign expansion boards with different
> configurations this could lead to problems. Split the configuration into
> a Overo module and expansion board part. The expansion board
> configuration is skipped if a foreign expansion board is detected. This
> enables a foreign expansion board to use the common boot loader without
> any modifications. It could load a specific device tree by saving the
> expansion name in the EEPROM.
>
> Additionally fix some errors in the environment configuration and add
> USB host support.
>
> The series is only tested on a foreign expansion boards. It would be nice
> if somebody could test it on an expansion board with network support.
>
>
> Stefan Herbrechtsmeier (5):
>    omap3: overo: Fix fdtfile test
>    omap3: overo: Call bootm only after successful nand read
>    omap3: overo: Move ethernet setup to board_eth_init function
>    omap3: overo: Separate module and expansion board MUX configuration
>    omap3: overo: Add usb host support
>
>   board/overo/overo.c           | 137 ++++++++++++++++++++++++++++----------
>   board/overo/overo.h           | 150 ++++++++++++++++++++++--------------------
>   include/configs/omap3_overo.h |  15 ++++-
>   3 files changed, 195 insertions(+), 107 deletions(-)
>
Any comments would be appreciated.