[U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards
Minkyu Kang
mk7.kang at samsung.com
Tue Sep 30 15:47:53 CEST 2014
Dear Simon Glass,
On 29/09/14 10:18, Simon Glass wrote:
> This series tries to unify the Samsung board configs into a few header
> files for exynos5 and exynos4.
>
> The purpose is to make it easier to move to driver model. In that case
> I would like things like the GPIO drivers and serial drivers to work in
> a standard way, and not need to support device tree and platform data at
> the same time. That would be quite painful.
>
> Another reason is that the Chrome OS EC drivers are currently included in
> boards that don't have a Chrome OS EC. This concern was raised by the
> Samsung maintainer (Minkyu) a while back.
>
> There are still a few boards that don't use CONFIG_OF_CONTROL so I have
> updated these rudimentary of device tree files based on feedback.
>
> This series has the side-effect of getting the EC interface working
> properly on Pit, so the keyboard works. It also provides access to the
> TPS65090 PMIC, which means that the backlight is enabled.
>
> Changes in v4:
> - Address review nits from Minkyu
> - Make this driver more like the one it came from
> - Rebase on top of master (CONFIG_OF settings moved to Kconfig)
> - Remove special FET_ERR_NOT_READY etc. and use standard errors
>
> Changes in v3:
> - Adjust device tree file based on Robert Baldyga's example
>
> Changes in v2:
> - Add new patch to enable keyboard on pit
> - Add new patch to split out cros_ec drivers
> - Add new patch to use 900MHz ARM frequeny in SPL for peach_pit
> - Avoid using a common file, and just add a device tree
> - Don't enable the cros_ec on smdk5420
> - Fix 'cashe' typo in commit subject
> - Fix device tree base addresses
> - Leave CONFIG_SERIAL3 in the individual board files
> - Leave in a few configs which are not in fact common to all boards
> - Reduce the number of common elements to avoid needing #undefs later
> - Slightly reword the commit message
>
> Simon Glass (15):
> Exynos: Use 900MHz ARM frequency in SPL for peach_pit
> exynos5: Enable data cache
> cros_ec: power: Add a tunnelled version of the tps65090 driver
> cros_ec: exynos: Use the correct tps65090 driver in each case
> dm: exynos: Split out the cros_ec drivers
> exynos: dts: Add device tree node for cros_ec keyboard
> exynos: Rename -dt config files to -common
> exynos: Move common exynos settings into a common file
> exynos: Move common smdk5420 things to common file
> exynos: config: Move cros_ec and tps65090 out of smdk boards
> config: Move arndale to use common exynos5250 file
> config: Move smdkv310 to use common exynos4 file
> samsung: Enable device tree for s5p_goni
> samsung: Enable device tree for smdkc100
> exynos: Enable pre-relocation malloc()
>
> arch/arm/Kconfig | 13 +-
> arch/arm/cpu/armv7/exynos/Kconfig | 1 +
> arch/arm/cpu/armv7/s5pc1xx/Kconfig | 25 +++
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/exynos4210-smdkv310.dts | 21 ++
> arch/arm/dts/exynos5420-peach-pit.dts | 57 +++++-
> arch/arm/dts/s5pc1xx-goni.dts | 28 +++
> arch/arm/dts/s5pc1xx-smdkc100.dts | 29 +++
> arch/arm/include/asm/arch-s5pc1xx/periph.h | 61 ++++++
> arch/arm/include/asm/arch-s5pc1xx/pinmux.h | 50 +++++
> configs/s5p_goni_defconfig | 2 +
> configs/smdkc100_defconfig | 2 +
> configs/smdkv310_defconfig | 1 +
> drivers/mmc/s5p_sdhci.c | 2 -
> drivers/power/pmic/Makefile | 3 +-
> drivers/power/pmic/pmic_tps65090_ec.c | 218 +++++++++++++++++++++
> include/configs/arndale.h | 195 +-----------------
> include/configs/{exynos4-dt.h => exynos-common.h} | 110 +++--------
> include/configs/exynos4-common.h | 68 +++++++
> include/configs/{exynos5-dt.h => exynos5-common.h} | 126 ++----------
> include/configs/exynos5-dt-common.h | 35 ++++
> .../{exynos5250-dt.h => exynos5250-common.h} | 7 +-
> .../configs/{exynos5420.h => exynos5420-common.h} | 22 ++-
> include/configs/odroid.h | 4 +-
> include/configs/origen.h | 5 +-
> include/configs/peach-pit.h | 16 +-
> include/configs/s5p_goni.h | 9 +-
> include/configs/s5pc210_universal.h | 5 +-
> include/configs/smdk5250.h | 23 ++-
> include/configs/smdk5420.h | 5 +-
> include/configs/smdkc100.h | 6 +
> include/configs/smdkv310.h | 61 +-----
> include/configs/snow.h | 25 ++-
> include/configs/trats.h | 6 +-
> include/configs/trats2.h | 6 +-
> 35 files changed, 760 insertions(+), 490 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/s5pc1xx/Kconfig
> create mode 100644 arch/arm/dts/exynos4210-smdkv310.dts
> create mode 100644 arch/arm/dts/s5pc1xx-goni.dts
> create mode 100644 arch/arm/dts/s5pc1xx-smdkc100.dts
> create mode 100644 arch/arm/include/asm/arch-s5pc1xx/periph.h
> create mode 100644 arch/arm/include/asm/arch-s5pc1xx/pinmux.h
> create mode 100644 drivers/power/pmic/pmic_tps65090_ec.c
> rename include/configs/{exynos4-dt.h => exynos-common.h} (51%)
> create mode 100644 include/configs/exynos4-common.h
> rename include/configs/{exynos5-dt.h => exynos5-common.h} (64%)
> create mode 100644 include/configs/exynos5-dt-common.h
> rename include/configs/{exynos5250-dt.h => exynos5250-common.h} (88%)
> rename include/configs/{exynos5420.h => exynos5420-common.h} (71%)
>
patch failed at latest u-boot-samsung tree.
error: patch failed: include/configs/smdk5250.h:9
error: include/configs/smdk5250.h: patch does not apply
error: patch failed: include/configs/snow.h:9
error: include/configs/snow.h: patch does not apply
Patch failed at 0007 exynos: Rename -dt config files to -common
Please check.
Thanks,
Minkyu Kang.
More information about the U-Boot
mailing list