[U-Boot] [RESEND PATCH 0/6] Add support for Colibri Vybrid Modules

[Tom Rini]

On Wed, Apr 01, 2015 at 03:24:17PM +0530, Sanchayan Maity wrote:

> Hello,
> 
> This patchset adds support for the Toradex Colibri Vybrid VF50 and VF61
> modules. Boot up has been tested using the serial loader over UART.
> 
> First patch in the series refactors the DDR related code for use by both
> the tower board and colibri modules. It also introduces a DDR3 based
> JEDEC timing structure.
> 
> Second third and fourth patch in this series are improvement patches
> related to RTC, SoC/CPU detection and caches.
> 
> Fifth patch introduces USB support for Vybrid modules. Much of the code
> is similar to the ehci-mx6 driver. One open question here would be is
> there a better way to take care of this similarity and perhaps share the
> code base among the two drivers? Both host and client modes are working
> and DFU has also been tested. Currently, we restrict the ports to be in
> one of host and client mode.
> 
> Sixth patch adds the actual support for the Colibri modules.
> 
> Comments and feedback are most welcome.

Aside from the minor comments, I'll take this after the release, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150401/3903afe6/attachment.sig>