[U-Boot] [PATCH v3 12/17] dm: regulator: add fixed voltage regulator driver
Przemyslaw Marczak
p.marczak at samsung.com
Fri Apr 3 18:09:38 CEST 2015
Hello Simon,
On 03/29/2015 03:08 PM, Simon Glass wrote:
> Hi Przemyslaw,
>
> On 24 March 2015 at 14:30, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>> This driver implements regulator uclass features for fixed value regulators.
>> For getting the basic regulator device-tree node constraints, this driver calls
>> function 'regulator_ofdata_to_platdata()'. The typical fixed regulator node
>> provides few additional properties:
>> - gpio
>> - gpio-open-drain
>> - enable-active-high
>> - startup-delay-us
>> All above are checked and keept in structure of type 'fixed_regulator_priv',
>> which is private for each fixed-regulator device (dev->priv).
>>
>> The driver implements only three of regulator uclass features:
>> - get_value
>> - get_enable
>> - set_enable
>>
>> The regulator calls and command line features can be used for fixed-regulator,
>> and the proper error will be returned for prohibited.
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
>>
>> Changes v3:
>> - new file
>> - Kconfig add fixed-regulator entry
>> ---
>> drivers/power/Kconfig | 8 +++
>> drivers/power/regulator/Makefile | 1 +
>> drivers/power/regulator/fixed.c | 124 +++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 133 insertions(+)
>> create mode 100644 drivers/power/regulator/fixed.c
>>
>> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
>> index 97abbf0..da1e866 100644
>> --- a/drivers/power/Kconfig
>> +++ b/drivers/power/Kconfig
>> @@ -120,6 +120,14 @@ config DM_REGULATOR_MAX77686
>> features for REGULATOR MAX77686. The driver implements get/set api for:
>> value, enable and mode.
>>
>> +config DM_REGULATOR_FIXED
>> + bool "Enable Driver Model for REGULATOR Fixed value"
>> + depends on DM_REGULATOR
>> + ---help---
>> + This config enables implementation of driver-model regulator uclass
>> + features for fixed value regulators. The driver implements get/set api
>> + for enable and get only for voltage value.
>> +
>
> Should be in drivers/regulator/Kconfig I think
>
Right, will fix.
>> config AXP221_DCDC1_VOLT
>> int "axp221 dcdc1 voltage"
>> depends on AXP221_POWER
>> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
>> index 9d282e3..0a6a6d9 100644
>> --- a/drivers/power/regulator/Makefile
>> +++ b/drivers/power/regulator/Makefile
>> @@ -5,4 +5,5 @@
>> # SPDX-License-Identifier: GPL-2.0+
>> #
>>
>> +obj-$(CONFIG_DM_REGULATOR_FIXED) += fixed.o
>> obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
>> diff --git a/drivers/power/regulator/fixed.c b/drivers/power/regulator/fixed.c
>> new file mode 100644
>> index 0000000..45e9f84
>> --- /dev/null
>> +++ b/drivers/power/regulator/fixed.c
>> @@ -0,0 +1,124 @@
>> +/*
>> + * Copyright (C) 2015 Samsung Electronics
>> + *
>> + * Przemyslaw Marczak <p.marczak at samsung.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <fdtdec.h>
>> +#include <i2c.h>
>> +#include <dm.h>
>> +#include <asm/gpio.h>
>> +#include <power/pmic.h>
>> +#include <power/regulator.h>
>> +#include <errno.h>
>> +#include <dm.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +struct fixed_regulator_priv {
>> + struct gpio_desc gpio;
>> + bool gpio_open_drain;
>> + bool enable_active_high;
>> + unsigned startup_delay_us;
>
> Docs for these?
>
Right, will add.
>> +};
>> +
>> +static int fixed_regulator_ofdata_to_platdata(struct udevice *dev)
>> +{
>> + struct dm_regulator_info *info = dev->uclass_priv;
>> + struct fixed_regulator_priv *priv = dev->priv;
>> + int ret, offset = dev->of_offset;
>> +
>> + /* Get the basic regulator constraints */
>> + ret = regulator_ofdata_to_platdata(dev);
>> + if (ret) {
>> + error("Can't get regulator constraints for %s", dev->name);
>> + return ret;
>> + }
>> +
>> + /* Get fixed regulator gpio desc */
>> + ret = gpio_request_by_name_nodev(gd->fdt_blob, offset, "gpio", 0,
>> + &priv->gpio, GPIOD_IS_OUT);
>
> Should not use the nodev version - you have a device.
>
Yes, will update this.
>> + if (ret) {
>> + error("Fixed regulator gpio - not found! Error: %d", ret);
>> + return ret;
>> + }
>> +
>> + /* Get fixed regulator addidional constraints */
>> + priv->gpio_open_drain = fdtdec_get_bool(gd->fdt_blob, offset,
>> + "gpio-open-drain");
>> + priv->enable_active_high = fdtdec_get_bool(gd->fdt_blob, offset,
>> + "enable-active-high");
>> + priv->startup_delay_us = fdtdec_get_int(gd->fdt_blob, offset,
>> + "startup-delay-us", 0);
>> +
>> + /* Set type to fixed - used by regulator command */
>> + info->type = REGULATOR_TYPE_FIXED;
>> +
>> + debug("%s:%d\n", __func__, __LINE__);
>> + debug(" name:%s, boot_on:%d, active_hi: %d start_delay:%u\n",
>> + info->name, info->boot_on, priv->enable_active_high,
>> + priv->startup_delay_us);
>> +
>> + return 0;
>> +}
>> +
>> +static int fixed_regulator_get_value(struct udevice *dev)
>> +{
>> + struct dm_regulator_info *info;
>> + int ret;
>> +
>> + ret = regulator_info(dev, &info);
>> + if (ret)
>> + return ret;
>> +
>> + if (info->min_uV == info->max_uV)
>> + return info->min_uV;
>> +
>> + error("Invalid constraints for: %s\n", info->name);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static bool fixed_regulator_get_enable(struct udevice *dev)
>> +{
>> + struct fixed_regulator_priv *priv = dev->priv;
>
> get_get_priv(dev)
>
> Please use that everywhere.
>
Ok, will fix this.
>> +
>> + return dm_gpio_get_value(&priv->gpio);
>> +}
>> +
>> +static int fixed_regulator_set_enable(struct udevice *dev, bool enable)
>> +{
>> + struct fixed_regulator_priv *priv = dev->priv;
>> + int ret;
>> +
>> + ret = dm_gpio_set_value(&priv->gpio, enable);
>> + if (ret) {
>> + error("Can't set regulator : %s gpio to: %d\n", dev->name,
>> + enable);
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static const struct dm_regulator_ops fixed_regulator_ops = {
>> + .get_value = fixed_regulator_get_value,
>> + .get_enable = fixed_regulator_get_enable,
>> + .set_enable = fixed_regulator_set_enable,
>> +};
>> +
>> +static const struct udevice_id fixed_regulator_ids[] = {
>> + { .compatible = "regulator-fixed" },
>> + { },
>> +};
>> +
>> +U_BOOT_DRIVER(fixed_regulator) = {
>> + .name = "fixed regulator",
>> + .id = UCLASS_REGULATOR,
>> + .ops = &fixed_regulator_ops,
>> + .of_match = fixed_regulator_ids,
>> + .ofdata_to_platdata = fixed_regulator_ofdata_to_platdata,
>> + .priv_auto_alloc_size = sizeof(struct fixed_regulator_priv),
>> +};
>> --
>> 1.9.1
>>
>
> Regards,
> Simon
>
Thanks,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
More information about the U-Boot
mailing list