[U-Boot] [PATCH v3 3/3] usb: Early failure when the first descriptor read fails or is invalid

[Paul Kocialkowski]

This may happen when using an USB1 device on a controller that only supports
USB2 (e.g. EHCI). Reading the first descriptor will fail (read 0 byte), so we
can abort the process at this point instead of failing later and wasting time.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 common/usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/common/usb.c b/common/usb.c
index 6ed3124..f648847 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -956,7 +956,7 @@ int usb_new_device(struct usb_device *dev)
 	 */
 #ifndef CONFIG_USB_XHCI
 	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
-	if (err < 0) {
+	if (err < sizeof(struct usb_device_descriptor)) {
 		debug("usb_new_device: usb_get_descriptor() failed\n");
 		return -EIO;
 	}
@@ -996,6 +996,9 @@ int usb_new_device(struct usb_device *dev)
 	case 64:
 		dev->maxpacketsize = PACKET_SIZE_64;
 		break;
+	default:
+		printf("usb_new_device: invalid max packet size\n");
+		return -EIO;
 	}
 	dev->devnum = addr;
 
-- 
1.9.1