[U-Boot] [PATCH v2 2/3] sunxi: Complete i2c support for each supported platform
Paul Kocialkowski
contact at paulk.fr
Sun Apr 5 22:56:30 CEST 2015
Le dimanche 05 avril 2015 à 12:31 -0600, Simon Glass a écrit :
> Hi Paul,
>
> On 4 April 2015 at 14:49, Paul Kocialkowski <contact at paulk.fr> wrote:
> > Sunxi platforms come with at least 3 TWI (I2C) controllers and some platforms
> > even have up to 5. This adds support for every controller on each supported
> > platform, which is especially useful when using expansion ports on single-board-
> > computers.
> >
> > Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
> > ---
> > arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 +++
> > arch/arm/include/asm/arch-sunxi/gpio.h | 15 +++++-
> > arch/arm/include/asm/arch-sunxi/i2c.h | 13 +++++
> > board/sunxi/Kconfig | 31 ++++++++++++
> > board/sunxi/board.c | 75 ++++++++++++++++++++++++++++-
> > 5 files changed, 138 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> > index dae6069..f403742 100644
> > --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> > +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> > @@ -94,6 +94,13 @@
> > #define SUNXI_TWI0_BASE 0x01c2ac00
> > #define SUNXI_TWI1_BASE 0x01c2b000
> > #define SUNXI_TWI2_BASE 0x01c2b400
> > +#ifdef CONFIG_MACH_SUN6I
> > +#define SUNXI_TWI3_BASE 0x01c0b800
> > +#endif
> > +#ifdef CONFIG_MACH_SUN7I
> > +#define SUNXI_TWI3_BASE 0x01c2b800
> > +#define SUNXI_TWI4_BASE 0x01c2c000
> > +#endif
> >
> > #define SUNXI_CAN_BASE 0x01c2bc00
> >
> > diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
> > index f227044..ae7cbb7 100644
> > --- a/arch/arm/include/asm/arch-sunxi/gpio.h
> > +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
> > @@ -148,7 +148,11 @@ enum sunxi_gpio_number {
> > #define SUN6I_GPA_SDC2 5
> > #define SUN6I_GPA_SDC3 4
> >
> > -#define SUNXI_GPB_TWI0 2
> > +#define SUN4I_GPB_TWI0 2
> > +#define SUN4I_GPB_TWI1 2
> > +#define SUN5I_GPB_TWI1 2
> > +#define SUN4I_GPB_TWI2 2
> > +#define SUN5I_GPB_TWI2 2
> > #define SUN4I_GPB_UART0 2
> > #define SUN5I_GPB_UART0 2
> >
> > @@ -160,6 +164,7 @@ enum sunxi_gpio_number {
> > #define SUNXI_GPD_LVDS0 3
> >
> > #define SUN5I_GPE_SDC2 3
> > +#define SUN8I_GPE_TWI2 3
> >
> > #define SUNXI_GPF_SDC0 2
> > #define SUNXI_GPF_UART0 4
> > @@ -169,12 +174,20 @@ enum sunxi_gpio_number {
> > #define SUN5I_GPG_SDC1 2
> > #define SUN6I_GPG_SDC1 2
> > #define SUN8I_GPG_SDC1 2
> > +#define SUN6I_GPG_TWI3 2
> > #define SUN5I_GPG_UART1 4
> >
> > #define SUN4I_GPH_SDC1 5
> > +#define SUN6I_GPH_TWI0 2
> > +#define SUN8I_GPH_TWI0 2
> > +#define SUN6I_GPH_TWI1 2
> > +#define SUN8I_GPH_TWI1 2
> > +#define SUN6I_GPH_TWI2 2
> > #define SUN6I_GPH_UART0 2
> >
> > #define SUNXI_GPI_SDC3 2
> > +#define SUN7I_GPI_TWI3 3
> > +#define SUN7I_GPI_TWI4 3
> >
> > #define SUN6I_GPL0_R_P2WI_SCK 3
> > #define SUN6I_GPL1_R_P2WI_SDA 3
> > diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h
> > index 502e3c6..5e9586f 100644
> > --- a/arch/arm/include/asm/arch-sunxi/i2c.h
> > +++ b/arch/arm/include/asm/arch-sunxi/i2c.h
> > @@ -9,6 +9,19 @@
> > #include <asm/arch/cpu.h>
> >
> > #define CONFIG_I2C_MVTWSI_BASE0 SUNXI_TWI0_BASE
> > +#ifdef CONFIG_I2C1_ENABLE
> > +#define CONFIG_I2C_MVTWSI_BASE1 SUNXI_TWI1_BASE
> > +#endif
> > +#ifdef CONFIG_I2C2_ENABLE
> > +#define CONFIG_I2C_MVTWSI_BASE2 SUNXI_TWI2_BASE
> > +#endif
> > +#ifdef CONFIG_I2C3_ENABLE
> > +#define CONFIG_I2C_MVTWSI_BASE3 SUNXI_TWI3_BASE
> > +#endif
> > +#ifdef CONFIG_I2C4_ENABLE
> > +#define CONFIG_I2C_MVTWSI_BASE4 SUNXI_TWI4_BASE
> > +#endif
> > +
> > /* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
> > #define CONFIG_SYS_TCLK 24000000
> >
> > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
> > index ccc2080..d3b5bad 100644
> > --- a/board/sunxi/Kconfig
> > +++ b/board/sunxi/Kconfig
> > @@ -269,6 +269,37 @@ config USB2_VBUS_PIN
> > ---help---
> > See USB1_VBUS_PIN help text.
> >
> > +config I2C1_ENABLE
> > + bool "Enable I2C/TWI controller 1"
> > + default n
> > + ---help---
> > + This allows enabling I2C/TWI controller 1 by muxing its pins, enabling
> > + its clock and setting up the bus. This is especially useful on devices
> > + with slaves connected to the bus or with pins exposed through e.g. an
> > + expansion port/header.
> > +
> > +config I2C2_ENABLE
> > + bool "Enable I2C/TWI controller 2"
> > + default n
> > + ---help---
> > + See I2C1_ENABLE help text.
> > +
> > +if MACH_SUN6I || MACH_SUN7I
> > +config I2C3_ENABLE
> > + bool "Enable I2C/TWI controller 3"
> > + default n
> > + ---help---
> > + See I2C1_ENABLE help text.
> > +endif
> > +
> > +if MACH_SUN7I
> > +config I2C4_ENABLE
> > + bool "Enable I2C/TWI controller 4"
> > + default n
> > + ---help---
> > + See I2C1_ENABLE help text.
> > +endif
>
> It seems wrong to me to add these when they are already in the device
> tree for the board. Can we not use that?
Well, Hans has a point when saying that some users may use those pins as
GPIO while some others may use the TWI/I2C functions, so it makes sense
to make this configurable via Kconfig instead of being statically
defined.
> If you would rather wait until we have driver model I2C on sunxi
> (mvtwsi, I think) then I'd be happy to do the conversion. It's pretty
> easy.
I would be happy to see U-Boot on sunxi use devicetree and driver model
for TWI/I2C as well (provided users can still configure what busses to
enable). Still, I'd like to see this getting merged as a short term
solution.
> How can we get sunxi moved over before there is an explosion of these
> sorts of things (as we have already seen with video options)?
I think Hans will know better (than myself) how to do this right.
> > +
> > config VIDEO
> > boolean "Enable graphical uboot console on HDMI, LCD or VGA"
> > default y
> > diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> > index 986261a..0fb458b 100644
> > --- a/board/sunxi/board.c
> > +++ b/board/sunxi/board.c
> > @@ -276,9 +276,80 @@ int board_mmc_init(bd_t *bis)
> >
> > void i2c_init_board(void)
> > {
> > - sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB_TWI0);
> > - sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB_TWI0);
> > +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
> > clock_twi_onoff(0, 1);
> > +#elif defined(CONFIG_MACH_SUN6I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
> > + clock_twi_onoff(0, 1);
> > +#elif defined(CONFIG_MACH_SUN8I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
> > + clock_twi_onoff(0, 1);
> > +#endif
> > +
> > +#ifdef CONFIG_I2C1_ENABLE
> > +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
> > + clock_twi_onoff(1, 1);
> > +#elif defined(CONFIG_MACH_SUN5I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
> > + clock_twi_onoff(1, 1);
> > +#elif defined(CONFIG_MACH_SUN6I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
> > + clock_twi_onoff(1, 1);
> > +#elif defined(CONFIG_MACH_SUN8I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
> > + clock_twi_onoff(1, 1);
> > +#endif
> > +#endif
> > +
> > +#ifdef CONFIG_I2C2_ENABLE
> > +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
> > + clock_twi_onoff(2, 1);
> > +#elif defined(CONFIG_MACH_SUN5I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
> > + clock_twi_onoff(2, 1);
> > +#elif defined(CONFIG_MACH_SUN6I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
> > + clock_twi_onoff(2, 1);
> > +#elif defined(CONFIG_MACH_SUN8I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
> > + clock_twi_onoff(2, 1);
> > +#endif
> > +#endif
> > +
> > +#ifdef CONFIG_I2C3_ENABLE
> > +#if defined(CONFIG_MACH_SUN6I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
> > + clock_twi_onoff(3, 1);
> > +#elif defined(CONFIG_MACH_SUN7I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
> > + clock_twi_onoff(3, 1);
> > +#endif
> > +#endif
> > +
> > +#ifdef CONFIG_I2C4_ENABLE
> > +#if defined(CONFIG_MACH_SUN7I)
> > + sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
> > + sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
> > + clock_twi_onoff(4, 1);
> > +#endif
> > +#endif
> > +
> > #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
> > soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
> > soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
> > --
> > 1.9.1
>
> Regards,
> Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150405/619b7856/attachment.sig>
More information about the U-Boot
mailing list