[U-Boot] [PATCH] mx53loco: Disable printing cpuinfo

Hui.Liu at freescale.com Hui.Liu at freescale.com
Tue Apr 7 05:46:22 CEST 2015


> -----Original Message-----
> From: Fabio Estevam [mailto:fabio.estevam at freescale.com]
> Sent: Monday, April 06, 2015 10:23 PM
> To: sbabic at denx.de
> Cc: Liu Hui-R64343; u-boot at lists.denx.de; Estevam Fabio-R49496
> Subject: [PATCH] mx53loco: Disable printing cpuinfo
> 
> Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the
> following boot messages on a mx53qsb:
> 
> U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39)
> 
> CPU:   Freescale i.MX53 rev2.1 at 800 MHz
> Reset cause: POR
> Board: MX53 LOCO
> I2C:   ready
> DRAM:  1 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> In:    serial
> Out:   serial
> Err:   serial
> CPU:   Freescale i.MX53 rev2.1 at 1000 MHz
> Reset cause: unknown reset
> Net:   FEC [PRIME]
> 
> The CPU and Reset cause lines appear twice.
> 
> Initially mx53 boots at 800MHz, then at a later point the PMIC is
> configured via I2C to raise the CPU voltage so that it can run at 1GHz.
> 
> To avoid such misleading double printings, disable printing cpu info for
> now.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Acked-by: Jason Liu <r64343 at freescale.com> 


> ---
>  board/freescale/mx53loco/mx53loco.c | 1 -
>  include/configs/mx53loco.h          | 2 --
>  2 files changed, 3 deletions(-)
> 
> diff --git a/board/freescale/mx53loco/mx53loco.c
> b/board/freescale/mx53loco/mx53loco.c
> index 9ece6ec..1298788 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -389,7 +389,6 @@ int board_late_init(void)  {
>  	if (!power_init())
>  		clock_1GHz();
> -	print_cpuinfo();
> 
>  	return 0;
>  }
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index 8f92234..3551e02 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -24,8 +24,6 @@
> 
>  #define CONFIG_SYS_GENERIC_BOARD
> 
> -#define CONFIG_DISPLAY_CPUINFO
> -
>  /* Size of malloc() pool */
>  #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
> 
> --
> 1.9.1



More information about the U-Boot mailing list