[U-Boot] [PATCH 33/34] imx: ventana: Add new memory configuration
Tim Harvey
tharvey at gateworks.com
Wed Apr 8 21:55:03 CEST 2015
From: Pushpal Sidhu <psidhu at gateworks.com>
Add memory configuration for an IMX6SDL + 1GB density DRAM.
Signed-off-by: Pushpal Sidhu <psidhu at gateworks.com>
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
board/gateworks/gw_ventana/gw_ventana_spl.c | 60 +++++++++++++++++++++++++----
1 file changed, 52 insertions(+), 8 deletions(-)
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index b839b89..e3d4e57 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -188,6 +188,20 @@ struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
.grp_b7ds = 0x00000030,
};
+/* MT41K64M16JT-125 (1Gb density) */
+static struct mx6_ddr3_cfg mt41k64m16jt_125 = {
+ .mem_speed = 1600,
+ .density = 1,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 13,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
/* MT41K128M16JT-125 (2Gb density) */
static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
.mem_speed = 1600,
@@ -219,6 +233,18 @@ static struct mx6_ddr3_cfg mt41k256m16ha_125 = {
/*
* calibration - these are the various CPU/DDR3 combinations we support
*/
+static struct mx6_mmdc_calibration mx6sdl_64x16_mmdc_calib = {
+ /* write leveling calibration determine */
+ .p0_mpwldectrl0 = 0x004C004E,
+ .p0_mpwldectrl1 = 0x00440044,
+ /* Read DQS Gating calibration */
+ .p0_mpdgctrl0 = 0x42440247,
+ .p0_mpdgctrl1 = 0x02310232,
+ /* Read Calibration: DQS delay relative to DQ read access */
+ .p0_mprddlctl = 0x45424746,
+ /* Write Calibration: DQ/DM delay relative to DQS write access */
+ .p0_mpwrdlctl = 0x33382C31,
+};
static struct mx6_mmdc_calibration mx6dq_256x16_mmdc_calib = {
/* write leveling calibration determine */
@@ -389,7 +415,14 @@ static void spl_dram_init(int width, int size_mb, int board_model)
* mx6_ddr_sysinfo - board-specific memory architecture (width/cs/etc)
* mx6_ddr_cfg - chip specific timing/layout details
*/
- if (width == 16 && size_mb == 256) {
+ if (width == 16 && size_mb == 128) {
+ mem = &mt41k64m16jt_125;
+ if (is_cpu_type(MXC_CPU_MX6Q))
+ ;
+ else
+ calib = &mx6sdl_64x16_mmdc_calib;
+ debug("1gB density\n");
+ } else if (width == 16 && size_mb == 256) {
/* 1x 2Gb density chip - same calib as 2x 2Gb */
mem = &mt41k128m16jt_125;
if (is_cpu_type(MXC_CPU_MX6Q))
@@ -404,6 +437,14 @@ static void spl_dram_init(int width, int size_mb, int board_model)
else
calib = &mx6sdl_256x16_mmdc_calib;
debug("4gB density\n");
+ } else if (width == 32 && size_mb == 256) {
+ /* Same calib as width==16, size==128 */
+ mem = &mt41k64m16jt_125;
+ if (is_cpu_type(MXC_CPU_MX6Q))
+ ;
+ else
+ calib = &mx6sdl_64x16_mmdc_calib;
+ debug("1gB density\n");
} else if (width == 32 && size_mb == 512) {
mem = &mt41k128m16jt_125;
if (is_cpu_type(MXC_CPU_MX6Q))
@@ -411,6 +452,16 @@ static void spl_dram_init(int width, int size_mb, int board_model)
else
calib = &mx6sdl_128x32_mmdc_calib;
debug("2gB density\n");
+ } else if (width == 32 && size_mb == 1024) {
+ mem = &mt41k256m16ha_125;
+ if (is_cpu_type(MXC_CPU_MX6Q))
+ calib = &mx6dq_256x32_mmdc_calib;
+ else
+ calib = &mx6sdl_256x32_mmdc_calib;
+ debug("4gB density\n");
+ } else if (width == 64 && size_mb == 512) {
+ mem = &mt41k64m16jt_125;
+ debug("1gB density\n");
} else if (width == 64 && size_mb == 1024) {
mem = &mt41k128m16jt_125;
if (is_cpu_type(MXC_CPU_MX6Q))
@@ -418,13 +469,6 @@ static void spl_dram_init(int width, int size_mb, int board_model)
else
calib = &mx6sdl_128x64_mmdc_calib;
debug("2gB density\n");
- } else if (width == 32 && size_mb == 1024) {
- mem = &mt41k256m16ha_125;
- if (is_cpu_type(MXC_CPU_MX6Q))
- calib = &mx6dq_256x32_mmdc_calib;
- else
- calib = &mx6sdl_256x32_mmdc_calib;
- debug("4gB density\n");
} else if (width == 64 && size_mb == 2048) {
mem = &mt41k256m16ha_125;
if (is_cpu_type(MXC_CPU_MX6Q))
--
1.9.1
More information about the U-Boot
mailing list