[U-Boot] [PATCH v2 08/13] arm: mvebu: Add basic Armada 38x support

Stefan Roese sr at denx.de
Tue Apr 14 12:46:50 CEST 2015


This patch adds support for the Marvell Armada 38x SoC family.

Supported peripherals are:
- UART
- Ethernet (mvneta)
- I2C
- SPI (including SPI NOR flash)

Tested on Marvell DB-88F6820-GP evaluation board.

Signed-off-by: Stefan Roese <sr at denx.de>

---

Changes in v2:
- Made mvebu_soc_family() globally available so that it can be called
  from mbus.c
- Add PL310 L2 cache base address

 arch/arm/mach-mvebu/cpu.c              | 73 ++++++++++++++++++++++++++--------
 arch/arm/mach-mvebu/include/mach/cpu.h |  7 ++++
 arch/arm/mach-mvebu/include/mach/soc.h |  9 +++++
 3 files changed, 73 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 1cf70a9..eca5e21 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Stefan Roese <sr at denx.de>
+ * Copyright (C) 2014-2015 Stefan Roese <sr at denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -40,6 +40,20 @@ void reset_cpu(unsigned long ignored)
 		;
 }
 
+int mvebu_soc_family(void)
+{
+	u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff;
+
+	if (devid == SOC_MV78460_ID)
+		return MVEBU_SOC_AXP;
+
+	if (devid == SOC_88F6810_ID || devid == SOC_88F6820_ID ||
+	    devid == SOC_88F6828_ID)
+		return MVEBU_SOC_A38X;
+
+	return MVEBU_SOC_UNKNOWN;
+}
+
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
@@ -52,23 +66,48 @@ int print_cpuinfo(void)
 	case SOC_MV78460_ID:
 		puts("MV78460-");
 		break;
-	default:
-		puts("Unknown-");
+	case SOC_88F6810_ID:
+		puts("MV88F6810-");
 		break;
-	}
-
-	switch (revid) {
-	case 1:
-		puts("A0\n");
+	case SOC_88F6820_ID:
+		puts("MV88F6820-");
 		break;
-	case 2:
-		puts("B0\n");
+	case SOC_88F6828_ID:
+		puts("MV88F6828-");
 		break;
 	default:
-		puts("??\n");
+		puts("Unknown-");
 		break;
 	}
 
+	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
+		switch (revid) {
+		case 1:
+			puts("A0\n");
+			break;
+		case 2:
+			puts("B0\n");
+			break;
+		default:
+			printf("?? (%x)\n", revid);
+			break;
+		}
+	}
+
+	if (mvebu_soc_family() == MVEBU_SOC_A38X) {
+		switch (revid) {
+		case MV_88F68XX_Z1_ID:
+			puts("Z1\n");
+			break;
+		case MV_88F68XX_A0_ID:
+			puts("A0\n");
+			break;
+		default:
+			printf("?? (%x)\n", revid);
+			break;
+		}
+	}
+
 	return 0;
 }
 #endif /* CONFIG_DISPLAY_CPUINFO */
@@ -145,11 +184,13 @@ int arch_cpu_init(void)
 	 */
 	mvebu_mbus_probe(NULL, 0);
 
-	/*
-	 * Now the SDRAM access windows can be reconfigured using
-	 * the information in the SDRAM scratch pad registers
-	 */
-	update_sdram_window_sizes();
+	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
+		/*
+		 * Now the SDRAM access windows can be reconfigured using
+		 * the information in the SDRAM scratch pad registers
+		 */
+		update_sdram_window_sizes();
+	}
 
 	/*
 	 * Finally the mbus windows can be configured with the
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index 297ac52..3b48460 100644
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -56,6 +56,12 @@ enum cpu_attrib {
 	CPU_ATTR_DEV_CS3 = 0x37,
 };
 
+enum {
+	MVEBU_SOC_AXP,
+	MVEBU_SOC_A38X,
+	MVEBU_SOC_UNKNOWN,
+};
+
 /*
  * Default Device Address MAP BAR values
  */
@@ -106,6 +112,7 @@ unsigned int mvebu_sdram_bar(enum memory_bank bank);
 unsigned int mvebu_sdram_bs(enum memory_bank bank);
 void mvebu_sdram_size_adjust(enum memory_bank bank);
 int mvebu_mbus_probe(struct mbus_win windows[], int count);
+int mvebu_soc_family(void);
 
 /*
  * Highspeed SERDES PHY config init, ported from bin_hdr
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index f3e0398..0a9307c 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -12,6 +12,13 @@
 #define _MVEBU_SOC_H
 
 #define SOC_MV78460_ID		0x7846
+#define SOC_88F6810_ID		0x6810
+#define SOC_88F6820_ID		0x6820
+#define SOC_88F6828_ID		0x6828
+
+/* A38x revisions */
+#define MV_88F68XX_Z1_ID	0x0
+#define MV_88F68XX_A0_ID	0x4
 
 /* TCLK Core Clock definition */
 #ifndef CONFIG_SYS_TCLK
@@ -25,6 +32,8 @@
 #define MVEBU_REGISTER(x)	(SOC_REGS_PHY_BASE + x)
 
 #define MVEBU_SDRAM_SCRATCH	(MVEBU_REGISTER(0x01504))
+#define MVEBU_L2_CACHE_BASE	(MVEBU_REGISTER(0x08000))
+#define CONFIG_SYS_PL310_BASE	MVEBU_L2_CACHE_BASE
 #define MVEBU_SPI_BASE		(MVEBU_REGISTER(0x10600))
 #define MVEBU_TWSI_BASE		(MVEBU_REGISTER(0x11000))
 #define MVEBU_UART0_BASE	(MVEBU_REGISTER(0x12000))
-- 
2.3.5



More information about the U-Boot mailing list