[U-Boot] [PATCH 05/10] sunxi: Add support for A33 PLL11 (second DRAM pll)
Hans de Goede
hdegoede at redhat.com
Tue Apr 14 18:06:56 CEST 2015
Add support for the new second DRAM PLL found on the A33 SoC.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 18 +++++++++++++++
arch/arm/include/asm/arch-sunxi/clock.h | 3 ++-
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 33 +++++++++++++++++++++++----
3 files changed, 49 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index e2a7867..3bfa122 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -170,6 +170,24 @@ void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
udelay(5500);
}
+#ifdef CONFIG_MACH_SUN8I_A33
+void clock_set_pll11(unsigned int clk, bool sigma_delta_enable)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (sigma_delta_enable)
+ writel(CCM_PLL11_PATTERN, &ccm->pll5_pattern_cfg);
+
+ writel(CCM_PLL11_CTRL_EN | CCM_PLL11_CTRL_UPD |
+ (sigma_delta_enable ? CCM_PLL11_CTRL_SIGMA_DELTA_EN : 0) |
+ CCM_PLL11_CTRL_N(clk / 24000000), &ccm->pll11_cfg);
+
+ while (readl(&ccm->pll11_cfg) & CCM_PLL11_CTRL_UPD)
+ ;
+}
+#endif
+
unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
index ad4fb26..8d1eebe 100644
--- a/arch/arm/include/asm/arch-sunxi/clock.h
+++ b/arch/arm/include/asm/arch-sunxi/clock.h
@@ -16,7 +16,8 @@
/* clock control module regs definition */
#if defined(CONFIG_MACH_SUN6I) || \
- defined(CONFIG_MACH_SUN8I_A23)
+ defined(CONFIG_MACH_SUN8I_A23) || \
+ defined(CONFIG_MACH_SUN8I_A33)
#include <asm/arch/clock_sun6i.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/clock_sun9i.h>
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index d625970..c88b140 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -31,7 +31,7 @@ struct sunxi_ccm_reg {
u32 mipi_pll_cfg; /* 0x40 MIPI pll control */
u32 pll9_cfg; /* 0x44 pll9 control */
u32 pll10_cfg; /* 0x48 pll10 control */
- u32 reserved8;
+ u32 pll11_cfg; /* 0x4c pll11 (ddr1) control (A33 only) */
u32 cpu_axi_cfg; /* 0x50 CPU/AXI divide ratio */
u32 ahb1_apb1_div; /* 0x54 AHB1/APB1 divide ratio */
u32 apb2_div; /* 0x58 APB2 divide ratio */
@@ -63,7 +63,8 @@ struct sunxi_ccm_reg {
u32 reserved12[7];
u32 mdfs_clk_cfg; /* 0xf0 MDFS clock control */
u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */
- u32 reserved13[2];
+ u32 dram_pll_cfg; /* 0xf8 PLL_DDR cfg register, A33 only */
+ u32 mbus_reset; /* 0xfc MBUS reset control, A33 only */
u32 dram_clk_gate; /* 0x100 DRAM module gating */
u32 be0_clk_cfg; /* 0x104 BE0 module clock */
u32 be1_clk_cfg; /* 0x108 BE1 module clock */
@@ -126,7 +127,9 @@ struct sunxi_ccm_reg {
u32 mipi_pattern_cfg; /* 0x2a0 MIPI Pattern config */
u32 pll9_pattern_cfg; /* 0x2a4 PLL9 Pattern config */
u32 pll10_pattern_cfg; /* 0x2a8 PLL10 Pattern config */
- u32 reserved22[5];
+ u32 pll11_pattern_cfg0; /* 0x2ac PLL11 Pattern config0, A33 only */
+ u32 pll11_pattern_cfg1; /* 0x2b0 PLL11 Pattern config0, A33 only */
+ u32 reserved22[3];
u32 ahb_reset0_cfg; /* 0x2c0 AHB1 Reset 0 config */
u32 ahb_reset1_cfg; /* 0x2c4 AHB1 Reset 1 config */
u32 ahb_reset2_cfg; /* 0x2c8 AHB1 Reset 2 config */
@@ -195,6 +198,11 @@ struct sunxi_ccm_reg {
#define CCM_PLL6_CTRL_K_SHIFT 4
#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT)
+#define CCM_PLL11_CTRL_N(n) ((((n) - 1) & 0x3f) << 8)
+#define CCM_PLL11_CTRL_SIGMA_DELTA_EN (0x1 << 24)
+#define CCM_PLL11_CTRL_UPD (0x1 << 30)
+#define CCM_PLL11_CTRL_EN (0x1 << 31)
+
#define AHB1_ABP1_DIV_DEFAULT 0x00002020
#define AXI_GATE_OFFSET_DRAM 0
@@ -216,6 +224,7 @@ struct sunxi_ccm_reg {
/* ahb_gate1 offsets */
#define AHB_GATE_OFFSET_DRC0 25
+#define AHB_GATE_OFFSET_DE_FE0 14
#define AHB_GATE_OFFSET_DE_BE0 12
#define AHB_GATE_OFFSET_HDMI 11
#define AHB_GATE_OFFSET_LCD1 5
@@ -248,12 +257,23 @@ struct sunxi_ccm_reg {
#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */
+#define CCM_DRAMCLK_CFG_DIV(x) ((x - 1) << 0)
+#define CCM_DRAMCLK_CFG_DIV_MASK (0xf << 0)
#define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8)
#define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8)
#define CCM_DRAMCLK_CFG_UPD (0x1 << 16)
#define CCM_DRAMCLK_CFG_RST (0x1 << 31)
+#define CCM_DRAMPLL_CFG_SRC_PLL5 (0x0 << 16) /* Select PLL5 (DDR0) */
+#define CCM_DRAMPLL_CFG_SRC_PLL11 (0x1 << 16) /* Select PLL11 (DDR1) */
+#define CCM_DRAMPLL_CFG_SRC_MASK (0x1 << 16)
+
+#define CCM_MBUS_RESET_RESET (0x1 << 31)
+
+#define CCM_DRAM_GATE_OFFSET_DE_FE0 24
+#define CCM_DRAM_GATE_OFFSET_DE_FE1 25
#define CCM_DRAM_GATE_OFFSET_DE_BE0 26
+#define CCM_DRAM_GATE_OFFSET_DE_BE1 27
#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24)
#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24)
@@ -280,13 +300,15 @@ struct sunxi_ccm_reg {
#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30)
#define CCM_HDMI_CTRL_GATE (0x1 << 31)
-#if defined CONFIG_MACH_SUN8I_A23
+#if defined CONFIG_MACH_SUN8I_A23 || defined CONFIG_MACH_SUN8I_A33
#define MBUS_CLK_DEFAULT 0x81000003 /* PLL6 / 4 */
#else
#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
#endif
+#define MBUS_CLK_GATE (0x1 << 31)
#define CCM_PLL5_PATTERN 0xd1303333
+#define CCM_PLL11_PATTERN 0xf5860000
/* ahb_reset0 offsets */
#define AHB_RESET_OFFSET_GMAC 17
@@ -299,7 +321,9 @@ struct sunxi_ccm_reg {
#define AHB_RESET_OFFSET_SS 5
/* ahb_reset1 offsets */
+#define AHB_RESET_OFFSET_SAT 26
#define AHB_RESET_OFFSET_DRC0 25
+#define AHB_RESET_OFFSET_DE_FE0 14
#define AHB_RESET_OFFSET_DE_BE0 12
#define AHB_RESET_OFFSET_HDMI 11
#define AHB_RESET_OFFSET_LCD1 5
@@ -326,6 +350,7 @@ struct sunxi_ccm_reg {
void clock_set_pll1(unsigned int hz);
void clock_set_pll3(unsigned int hz);
void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
+void clock_set_pll11(unsigned int clk, bool sigma_delta_enable);
unsigned int clock_get_pll6(void);
#endif
--
2.3.4
More information about the U-Boot
mailing list