[U-Boot] [PATCH] zynqmp: caches: Enable dcache for zynqmp
Michal Simek
michal.simek at xilinx.com
Wed Apr 15 15:34:30 CEST 2015
From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
Define the mmu table till 2MB granularity
enable dcaches for zynqmp.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
arch/arm/cpu/armv8/zynqmp/cpu.c | 164 ++++++++++++++++++++++++++++++++++++++++
include/configs/xilinx_zynqmp.h | 2 +-
2 files changed, 165 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv8/zynqmp/cpu.c b/arch/arm/cpu/armv8/zynqmp/cpu.c
index 79e6ff591bb4..60d7d20e17c8 100644
--- a/arch/arm/cpu/armv8/zynqmp/cpu.c
+++ b/arch/arm/cpu/armv8/zynqmp/cpu.c
@@ -28,3 +28,167 @@ unsigned int zynqmp_get_silicon_version(void)
return ZYNQMP_CSU_VERSION_EP108;
}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#include <asm/armv8/mmu.h>
+
+#define SECTION_SHIFT_L1 30UL
+#define SECTION_SHIFT_L2 21UL
+#define BLOCK_SIZE_L0 0x8000000000UL
+#define BLOCK_SIZE_L1 (1 << SECTION_SHIFT_L1)
+#define BLOCK_SIZE_L2 (1 << SECTION_SHIFT_L2)
+
+#define TCR_TG1_4K (1 << 31)
+#define TCR_EPD1_DISABLE (1 << 23)
+#define ZYNQMO_VA_BITS 40
+#define ZYNQMP_TCR TCR_TG1_4K | \
+ TCR_EPD1_DISABLE | \
+ TCR_SHARED_OUTER | \
+ TCR_SHARED_INNER | \
+ TCR_IRGN_WBWA | \
+ TCR_ORGN_WBWA | \
+ TCR_T0SZ(ZYNQMO_VA_BITS)
+
+#define MEMORY_ATTR PMD_SECT_AF | PMD_SECT_INNER_SHARE | \
+ PMD_ATTRINDX(MT_NORMAL) | \
+ PMD_TYPE_SECT
+#define DEVICE_ATTR PMD_SECT_AF | PMD_SECT_PXN | \
+ PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_NGNRNE) | \
+ PMD_TYPE_SECT
+
+/* 4K size is required to place 512 entries in each level */
+#define TLB_TABLE_SIZE 0x1000
+
+struct attr_tbl {
+ u32 num;
+ u64 attr;
+};
+
+static struct attr_tbl attr_tbll1t0[4] = { {16, 0x0},
+ {8, DEVICE_ATTR},
+ {32, MEMORY_ATTR},
+ {456, DEVICE_ATTR}
+ };
+static struct attr_tbl attr_tbll2t3[4] = { {0x180, DEVICE_ATTR},
+ {0x40, 0x0},
+ {0x3F, DEVICE_ATTR},
+ {0x1, MEMORY_ATTR}
+ };
+
+/*
+ * This mmu table looks as below
+ * Level 0 table contains two entries to 512GB sizes. One is Level1 Table 0
+ * and other Level1 Table1.
+ * Level1 Table0 contains entries for each 1GB from 0 to 511GB.
+ * Level1 Table1 contains entries for each 1GB from 512GB to 1TB.
+ * Level2 Table0, Level2 Table1, Level2 Table2 and Level2 Table3 contains
+ * entries for each 2MB starting from 0GB, 1GB, 2GB and 3GB respectively.
+ */
+static void zynqmp_mmu_setup(void)
+{
+ int el;
+ u32 index_attr;
+ u64 i, section_l1t0, section_l1t1;
+ u64 section_l2t0, section_l2t1, section_l2t2, section_l2t3;
+ u64 *level0_table = (u64 *)gd->arch.tlb_addr;
+ u64 *level1_table_0 = (u64 *)(gd->arch.tlb_addr + TLB_TABLE_SIZE);
+ u64 *level1_table_1 = (u64 *)(gd->arch.tlb_addr + (2 * TLB_TABLE_SIZE));
+ u64 *level2_table_0 = (u64 *)(gd->arch.tlb_addr + (3 * TLB_TABLE_SIZE));
+ u64 *level2_table_1 = (u64 *)(gd->arch.tlb_addr + (4 * TLB_TABLE_SIZE));
+ u64 *level2_table_2 = (u64 *)(gd->arch.tlb_addr + (5 * TLB_TABLE_SIZE));
+ u64 *level2_table_3 = (u64 *)(gd->arch.tlb_addr + (6 * TLB_TABLE_SIZE));
+
+ level0_table[0] =
+ (u64)level1_table_0 | PMD_TYPE_TABLE;
+ level0_table[1] =
+ (u64)level1_table_1 | PMD_TYPE_TABLE;
+
+ /*
+ * set level 1 table 0, covering 0 to 512GB
+ * set level 1 table 1, covering 512GB to 1TB
+ */
+ section_l1t0 = 0;
+ section_l1t1 = BLOCK_SIZE_L0;
+
+ index_attr = 0;
+ for (i = 0; i < 512; i++) {
+ level1_table_0[i] = section_l1t0;
+ level1_table_0[i] |= attr_tbll1t0[index_attr].attr;
+ attr_tbll1t0[index_attr].num--;
+ if (attr_tbll1t0[index_attr].num == 0)
+ index_attr++;
+ level1_table_1[i] = section_l1t1;
+ level1_table_1[i] |= DEVICE_ATTR;
+ section_l1t0 += BLOCK_SIZE_L1;
+ section_l1t1 += BLOCK_SIZE_L1;
+ }
+
+ level1_table_0[0] =
+ (u64)level2_table_0 | PMD_TYPE_TABLE;
+ level1_table_0[1] =
+ (u64)level2_table_1 | PMD_TYPE_TABLE;
+ level1_table_0[2] =
+ (u64)level2_table_2 | PMD_TYPE_TABLE;
+ level1_table_0[3] =
+ (u64)level2_table_3 | PMD_TYPE_TABLE;
+
+ section_l2t0 = 0;
+ section_l2t1 = section_l2t0 + BLOCK_SIZE_L1; /* 1GB */
+ section_l2t2 = section_l2t1 + BLOCK_SIZE_L1; /* 2GB */
+ section_l2t3 = section_l2t2 + BLOCK_SIZE_L1; /* 3GB */
+
+ index_attr = 0;
+
+ for (i = 0; i < 512; i++) {
+ level2_table_0[i] = section_l2t0 | MEMORY_ATTR;
+ level2_table_1[i] = section_l2t1 | MEMORY_ATTR;
+ level2_table_2[i] = section_l2t2 | DEVICE_ATTR;
+ level2_table_3[i] = section_l2t3 |
+ attr_tbll2t3[index_attr].attr;
+ attr_tbll2t3[index_attr].num--;
+ if (attr_tbll2t3[index_attr].num == 0)
+ index_attr++;
+ section_l2t0 += BLOCK_SIZE_L2;
+ section_l2t1 += BLOCK_SIZE_L2;
+ section_l2t2 += BLOCK_SIZE_L2;
+ section_l2t3 += BLOCK_SIZE_L2;
+ }
+
+ /* flush new MMU table */
+ flush_dcache_range(gd->arch.tlb_addr,
+ gd->arch.tlb_addr + gd->arch.tlb_size);
+
+ /* point TTBR to the new table */
+ el = current_el();
+ set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
+ ZYNQMP_TCR, MEMORY_ATTRIBUTES);
+
+ set_sctlr(get_sctlr() | CR_M);
+}
+
+int arch_cpu_init(void)
+{
+ icache_enable();
+ __asm_invalidate_dcache_all();
+ __asm_invalidate_tlb_all();
+ return 0;
+}
+
+/*
+ * This function is called from lib/board.c.
+ * It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
+ * There is no need to disable d-cache for this operation.
+ */
+void enable_caches(void)
+{
+ /* The data cache is not active unless the mmu is enabled */
+ if (!(get_sctlr() & CR_M)) {
+ invalidate_dcache_all();
+ __asm_invalidate_tlb_all();
+ zynqmp_mmu_setup();
+ }
+ puts("Enabling Caches...\n");
+
+ set_sctlr(get_sctlr() | CR_C);
+}
+#endif
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 2f00b417809e..6c608abfb9bb 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -36,7 +36,7 @@
#define CPU_RELEASE_ADDR 0xFFFFFF0
/* Cache Definitions */
-#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_IDENT_STRING " Xilinx ZynqMP"
--
2.3.5
More information about the U-Boot
mailing list