[U-Boot] [PATCH] mx6: Add initial SPL support for HummingBoard-i2eX

[Tom Rini]

On Wed, Apr 15, 2015 at 05:57:55PM -0300, Fabio Estevam wrote:

> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Add the initial SPL support for HummingBoard-i2eX, which is based on a
> MX6 Dual. 
> 
> For more information about HummingBoard, please check:
> http://www.solid-run.com/products/hummingboard/
> 
> Based on the work from Jon Nettleton and Rabeeh Khoury.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

If you add:

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 7ded5bc..6ba04b2 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -238,6 +238,7 @@
 #ifdef CONFIG_SPL
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
 #include "imx6_spl.h"
 #endif

Then:

> +- Flash the u-boot.img image into the SD card:
> +
> +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

Or if the first partition of the SD card is a FAT filesystem:
cp u-boot.img /path/to/mount/of/mmcblk0p1/ ; sync

It will work from a FAT fs as well.

Tested-by: Tom Rini <trini at konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150415/d6ba4712/attachment.sig>