[U-Boot] [PATCH] board/p2020rdb: fix the FDT_ERR_NOTFOUND issue

[York Sun]

On 03/24/2015 12:48 AM, ying.zhang at freescale.com wrote:
> From: Ying Zhang <b40530 at freescale.com>
> 
> Because the function ft_board_setup() delete the USB2 device node, it
> leads to can't find the device node and hung up.
> 
> In fact only P1020RDB needs to delete the USB2 node, this patch fixes
> this issue.
> 
> Signed-off-by: Ying Zhang <b40530 at freescale.com>
> ---
>  board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> index 3f47cfb..0c60fc3 100644
> --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> @@ -428,8 +428,10 @@ int ft_board_setup(void *blob, bd_t *bd)
>  {
>  	phys_addr_t base;
>  	phys_size_t size;
> +#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC)
>  	const char *soc_usb_compat = "fsl-usb2-dr";
>  	int err, usb1_off, usb2_off;
> +#endif

"err" is used elsewhere. Your change causes compiling error on these boards

P1025RDB_SDCARD P2020RDB-PC_36BIT_SPIFLASH P1021RDB-PC_36BIT_SPIFLASH
P2020RDB-PC_SPIFLASH P1020MBG-PC_36BIT_SDCARD P1024RDB_SPIFLASH
P1021RDB-PC_SPIFLASH P1020MBG-PC_SDCARD P2020RDB-PC_36BIT_SDCARD
P1021RDB-PC_SDCARD P2020RDB-PC_SDCARD P1024RDB_SDCARD P1025RDB_SPIFLASH
P1020UTM-PC_36BIT_SDCARD P1021RDB-PC_36BIT_SDCARD P1020UTM-PC_SDCARD

York