[U-Boot] [PATCH v2 4/6] zynqmp: Add SPI driver support for ZynqMP

[Michal Simek]

From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>

Added the SPI driver support for ZynqMP
The controller is same as zynq SPI controller

Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v2:
- Remove CMD_SPI from header based on Jagan's comment

 arch/arm/include/asm/arch-zynqmp/hardware.h | 3 +++
 include/configs/xilinx_zynqmp.h             | 7 +++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index 1fedb1bb4b94..c9dc49d78317 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -11,6 +11,9 @@
 #define ZYNQ_SERIAL_BASEADDR0	0xFF000000
 #define ZYNQ_SERIAL_BASEADDR1	0xFF001000
 
+#define ZYNQ_SPI_BASEADDR0	0xFF040000
+#define ZYNQ_SPI_BASEADDR1	0xFF050000
+
 #define ZYNQ_I2C_BASEADDR0	0xFF020000
 #define ZYNQ_I2C_BASEADDR1	0xFF030000
 
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 54bca6d47b72..1d8eaa76dfe7 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -71,6 +71,13 @@
 #define CONFIG_CMD_ELF
 #define CONFIG_MP
 
+/* SPI */
+#ifdef CONFIG_ZYNQ_SPI
+# define CONFIG_SPI_FLASH
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_CMD_SF
+#endif
+
 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
 # define CONFIG_MMC
 # define CONFIG_GENERIC_MMC
-- 
2.3.5