[U-Boot] [PATCH v2 4/6] zynqmp: Add SPI driver support for ZynqMP
Jagan Teki
jagannadh.teki at gmail.com
Mon Apr 20 14:49:16 CEST 2015
On 20 April 2015 at 18:15, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> On 20 April 2015 at 13:06, Michal Simek <michal.simek at xilinx.com> wrote:
>> From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
>>
>> Added the SPI driver support for ZynqMP
>> The controller is same as zynq SPI controller
>>
>> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
>> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
>> ---
>>
>> Changes in v2:
>> - Remove CMD_SPI from header based on Jagan's comment
>>
>> arch/arm/include/asm/arch-zynqmp/hardware.h | 3 +++
>> include/configs/xilinx_zynqmp.h | 7 +++++++
>> 2 files changed, 10 insertions(+)
>>
>> diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
>> index 1fedb1bb4b94..c9dc49d78317 100644
>> --- a/arch/arm/include/asm/arch-zynqmp/hardware.h
>> +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
>> @@ -11,6 +11,9 @@
>> #define ZYNQ_SERIAL_BASEADDR0 0xFF000000
>> #define ZYNQ_SERIAL_BASEADDR1 0xFF001000
>>
>> +#define ZYNQ_SPI_BASEADDR0 0xFF040000
>> +#define ZYNQ_SPI_BASEADDR1 0xFF050000
>> +
>> #define ZYNQ_I2C_BASEADDR0 0xFF020000
>> #define ZYNQ_I2C_BASEADDR1 0xFF030000
>>
>> diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
>> index 54bca6d47b72..1d8eaa76dfe7 100644
>> --- a/include/configs/xilinx_zynqmp.h
>> +++ b/include/configs/xilinx_zynqmp.h
>> @@ -71,6 +71,13 @@
>> #define CONFIG_CMD_ELF
>> #define CONFIG_MP
>>
>> +/* SPI */
>> +#ifdef CONFIG_ZYNQ_SPI
>> +# define CONFIG_SPI_FLASH
>> +# define CONFIG_SPI_FLASH_SST
>> +# define CONFIG_CMD_SF
>> +#endif
>> +
>> #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
>> # define CONFIG_MMC
>> # define CONFIG_GENERIC_MMC
>> --
>> 2.3.5
>
> Applied u-boot-spi/master
Unable to apply, have dependency with series.
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
Push this along with the series.
thanks!
--
Jagan.
More information about the U-Boot
mailing list