[U-Boot] [PATCH v5 1/3] mtd, spi: add MTD layer driver
Jagan Teki
jagannadh.teki at gmail.com
Wed Apr 22 12:52:47 CEST 2015
On 20 April 2015 at 11:17, Heiko Schocher <hs at denx.de> wrote:
> From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
>
> add MTD layer driver for spi, original patch from:
> http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced
>
> changes from Heiko Schocher against this patch:
> - remove compile error if not defining CONFIG_SPI_FLASH_MTD:
>
> LD drivers/mtd/spi/built-in.o
> drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister':
> /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
> drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
> drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister':
> /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
> drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
> make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1
> make: *** [drivers/mtd/spi] Fehler 2
>
> - add a README entry.
> - add correct writebufsize, to fit with Linux v3.14
> MTD, UBI/UBIFS sync.
>
> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
> Signed-off-by: Heiko Schocher <hs at denx.de>
>
> ---
>
> Changes in v2:
> - add comment from Daniel Schwierzeck:
> fix compile error from original patch with
> "static inline" rather than "static __maybe_unused"
> Series-changes: 3
> - rebase with d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
> Series-changes: 4
> - rebased against 385a08a60f042061b004642d6b9bb6cfb794ad5a
> Series-changes: 5
> - no changes
>
> README | 3 ++
> common/cmd_sf.c | 7 ++-
> drivers/mtd/spi/Makefile | 1 +
> drivers/mtd/spi/sf_internal.h | 13 ++++++
> drivers/mtd/spi/sf_mtd.c | 104 ++++++++++++++++++++++++++++++++++++++++++
> drivers/mtd/spi/sf_probe.c | 5 ++
> 6 files changed, 131 insertions(+), 2 deletions(-)
> create mode 100644 drivers/mtd/spi/sf_mtd.c
>
> diff --git a/README b/README
> index 9b748cc..56dcfd2 100644
> --- a/README
> +++ b/README
> @@ -3077,6 +3077,9 @@ CBFS (Coreboot Filesystem) support
> operation will not execute. The only way to exit this
> hardware-protected mode is to drive W#/VPP HIGH.
>
> + CONFIG_SPI_FLASH_MTD
> + add MTD translation layer driver.
> +
> - SystemACE Support:
> CONFIG_SYSTEMACE
>
> diff --git a/common/cmd_sf.c b/common/cmd_sf.c
> index 5c788e9..25a59e5 100644
> --- a/common/cmd_sf.c
> +++ b/common/cmd_sf.c
> @@ -132,14 +132,17 @@ static int do_spi_flash_probe(int argc, char * const argv[])
>
> flash = new->uclass_priv;
> #else
> + if (flash)
> + spi_flash_free(flash);
> +
> new = spi_flash_probe(bus, cs, speed, mode);
> + flash = new;
> +
This could be really a another patch - as it's not related to mtd.
> if (!new) {
> printf("Failed to initialize SPI flash at %u:%u\n", bus, cs);
> return 1;
> }
>
> - if (flash)
> - spi_flash_free(flash);
> flash = new;
> #endif
>
> diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
> index c61b784e..f8580cd 100644
> --- a/drivers/mtd/spi/Makefile
> +++ b/drivers/mtd/spi/Makefile
> @@ -17,5 +17,6 @@ obj-$(CONFIG_SPI_FLASH) += sf_probe.o
> #endif
> obj-$(CONFIG_CMD_SF) += sf.o
> obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o
> +obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
> obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
> obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o
> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
> index 785f7a9..dc75f43 100644
> --- a/drivers/mtd/spi/sf_internal.h
> +++ b/drivers/mtd/spi/sf_internal.h
> @@ -221,4 +221,17 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
> int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
> size_t len, void *data);
>
> +#ifdef CONFIG_SPI_FLASH_MTD
> +int spi_flash_mtd_register(struct spi_flash *flash);
> +void spi_flash_mtd_unregister(void);
> +#else
> +static inline int spi_flash_mtd_register(struct spi_flash *flash)
> +{
> + return 0;
> +}
> +static inline void spi_flash_mtd_unregister(void)
> +{
> +}
> +#endif
>From the previous comments to reply - https://patchwork.ozlabs.org/patch/386102/
Adding #def isn't a polluting thing in code size contains software's like u-boot
and did the same for many of my code.
So please do as below
#ifdef CONFIG_SPI_FLASH_MTD
int spi_flash_mtd_register(struct spi_flash *flash);
void spi_flash_mtd_unregister(void);
#endif
void spi_flash_free(struct spi_flash *flash)
{
#ifdef CONFIG_SPI_FLASH_MTD
spi_flash_mtd_unregister();
#endif
}
#ifdef CONFIG_SPI_FLASH_MTD
ret = spi_flash_mtd_register(flash);
if (ret)
goto err_claim_bus;
#endif
> +
> #endif /* _SF_INTERNAL_H_ */
> diff --git a/drivers/mtd/spi/sf_mtd.c b/drivers/mtd/spi/sf_mtd.c
> new file mode 100644
> index 0000000..0b9cb62
> --- /dev/null
> +++ b/drivers/mtd/spi/sf_mtd.c
> @@ -0,0 +1,104 @@
> +/*
> + * Copyright (C) 2012-2014 Daniel Schwierzeck, daniel.schwierzeck at gmail.com
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <asm/errno.h>
> +#include <linux/mtd/mtd.h>
> +#include <spi_flash.h>
> +
> +static struct mtd_info sf_mtd_info;
> +static char sf_mtd_name[8];
> +
> +static int spi_flash_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
> +{
> + struct spi_flash *flash = mtd->priv;
> + int err;
> +
> + instr->state = MTD_ERASING;
> +
> + err = spi_flash_erase(flash, instr->addr, instr->len);
> + if (err) {
> + instr->state = MTD_ERASE_FAILED;
> + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
> + return -EIO;
> + }
> +
> + instr->state = MTD_ERASE_DONE;
> + mtd_erase_callback(instr);
> +
> + return 0;
> +}
> +
> +static int spi_flash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
> + size_t *retlen, u_char *buf)
> +{
> + struct spi_flash *flash = mtd->priv;
> + int err;
> +
> + err = spi_flash_read(flash, from, len, buf);
> + if (!err)
> + *retlen = len;
> +
> + return err;
> +}
> +
> +static int spi_flash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
> + size_t *retlen, const u_char *buf)
> +{
> + struct spi_flash *flash = mtd->priv;
> + int err;
> +
> + err = spi_flash_write(flash, to, len, buf);
> + if (!err)
> + *retlen = len;
> +
> + return err;
> +}
> +
> +static void spi_flash_mtd_sync(struct mtd_info *mtd)
> +{
> +}
> +
> +static int spi_flash_mtd_number(void)
> +{
> +#ifdef CONFIG_SYS_MAX_FLASH_BANKS
> + return CONFIG_SYS_MAX_FLASH_BANKS;
> +#else
> + return 0;
> +#endif
> +}
> +
> +int spi_flash_mtd_register(struct spi_flash *flash)
> +{
> + memset(&sf_mtd_info, 0, sizeof(sf_mtd_info));
> + sprintf(sf_mtd_name, "nor%d", spi_flash_mtd_number());
> +
> + sf_mtd_info.name = sf_mtd_name;
> + sf_mtd_info.type = MTD_NORFLASH;
> + sf_mtd_info.flags = MTD_CAP_NORFLASH;
> + sf_mtd_info.writesize = 1;
> + sf_mtd_info.writebufsize = flash->page_size;
> +
> + sf_mtd_info._erase = spi_flash_mtd_erase;
> + sf_mtd_info._read = spi_flash_mtd_read;
> + sf_mtd_info._write = spi_flash_mtd_write;
> + sf_mtd_info._sync = spi_flash_mtd_sync;
> +
> + sf_mtd_info.size = flash->size;
> + sf_mtd_info.priv = flash;
> +
> + /* Only uniform flash devices for now */
> + sf_mtd_info.numeraseregions = 0;
> + sf_mtd_info.erasesize = flash->sector_size;
> +
> + return add_mtd_device(&sf_mtd_info);
> +}
> +
> +void spi_flash_mtd_unregister(void)
> +{
> + del_mtd_device(&sf_mtd_info);
> +}
> diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
> index 4103723..93209fe 100644
> --- a/drivers/mtd/spi/sf_probe.c
> +++ b/drivers/mtd/spi/sf_probe.c
> @@ -399,6 +399,10 @@ int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
> /* Release spi bus */
> spi_release_bus(spi);
>
> + ret = spi_flash_mtd_register(flash);
> + if (ret)
> + return ret;
mtd register call is before the spi_release_bus isn't it?
> +
> return 0;
>
> err_read_id:
> @@ -449,6 +453,7 @@ struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
>
> void spi_flash_free(struct spi_flash *flash)
> {
> + spi_flash_mtd_unregister();
> spi_free_slave(flash->spi);
> free(flash);
> }
> --
> 2.1.0
>
thanks!
--
Jagan.
More information about the U-Boot
mailing list