[U-Boot] [U-Boot 4/7] spi: zynq_spi: Add fdt support in driver
Jagannadha Sutradharudu Teki
jagannadh.teki at gmail.com
Thu Apr 23 16:15:32 CEST 2015
Now zynq spi driver platform data is controlled by devicetree,
enable the status by saying "okay" on respective board dts to use
the devicetree generated platdata.
Ex:
&spi1 {
status = "okay";
};
Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
arch/arm/dts/zynq-7000.dtsi | 2 ++
arch/arm/include/asm/arch-zynq/hardware.h | 2 --
doc/device-tree-bindings/spi/spi-zynq.txt | 2 ++
drivers/spi/zynq_spi.c | 23 +++++++++++++----------
4 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index f66f8dc..9207159 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -117,6 +117,7 @@
interrupts = <0 26 4>;
clocks = <&clkc 25>, <&clkc 34>;
clock-names = "ref_clk", "pclk";
+ spi-max-frequency = <166666700>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -129,6 +130,7 @@
interrupts = <0 49 4>;
clocks = <&clkc 26>, <&clkc 35>;
clock-names = "ref_clk", "pclk";
+ spi-max-frequency = <166666700>;
#address-cells = <1>;
#size-cells = <0>;
};
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index e2e0b73..df9b06b 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -19,8 +19,6 @@
#define ZYNQ_SDHCI_BASEADDR1 0xE0101000
#define ZYNQ_I2C_BASEADDR0 0xE0004000
#define ZYNQ_I2C_BASEADDR1 0xE0005000
-#define ZYNQ_SPI_BASEADDR0 0xE0006000
-#define ZYNQ_SPI_BASEADDR1 0xE0007000
#define ZYNQ_QSPI_BASEADDR 0xE000D000
#define ZYNQ_SMC_BASEADDR 0xE000E000
#define ZYNQ_NAND_BASEADDR 0xE1000000
diff --git a/doc/device-tree-bindings/spi/spi-zynq.txt b/doc/device-tree-bindings/spi/spi-zynq.txt
index a7c2757..f397a36 100644
--- a/doc/device-tree-bindings/spi/spi-zynq.txt
+++ b/doc/device-tree-bindings/spi/spi-zynq.txt
@@ -11,6 +11,7 @@ Required properties:
- clocks : Clock phandles (see clock bindings for details).
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz
Example:
@@ -22,6 +23,7 @@ Example:
interrupts = <0 26 4>;
clocks = <&clkc 25>, <&clkc 34>;
clock-names = "ref_clk", "pclk";
+ spi-max-frequency = <166666700>;
#address-cells = <1>;
#size-cells = <0>;
} ;
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 62edbbe..df4a99e 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -13,9 +13,12 @@
#include <errno.h>
#include <malloc.h>
#include <spi.h>
+#include <fdtdec.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */
#define ZYNQ_SPI_CR_MSA_MASK BIT(15) /* Manual start enb */
#define ZYNQ_SPI_CR_MCS_MASK BIT(14) /* Manual chip select */
@@ -64,22 +67,22 @@ struct zynq_spi_priv {
u32 freq; /* required frequency */
};
-static inline struct zynq_spi_regs *get_zynq_spi_regs(struct udevice *bus)
-{
- if (bus->seq)
- return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR1;
- else
- return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR0;
-}
-
static int zynq_spi_ofdata_to_platdata(struct udevice *bus)
{
struct zynq_spi_platdata *plat = bus->platdata;
+ const void *blob = gd->fdt_blob;
+ int node = bus->of_offset;
+
+ plat->regs = (struct zynq_spi_regs *)fdtdec_get_addr(blob, node, "reg");
- plat->regs = get_zynq_spi_regs(bus);
- plat->frequency = 166666700;
+ /* FIXME: Use 250MHz as a suitable default */
+ plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
+ 250000000);
plat->speed_hz = plat->frequency / 2;
+ debug("zynq_spi_ofdata_to_platdata: regs=%p max-frequency=%d\n",
+ plat->regs, plat->frequency);
+
return 0;
}
--
1.9.1
More information about the U-Boot
mailing list