[U-Boot] [PATCH 3/4] x86: gpio: add pinctrl support from the device tree
Bin Meng
bmeng.cn at gmail.com
Fri Apr 24 05:14:31 CEST 2015
Hi Gabriel,
On Fri, Apr 24, 2015 at 12:16 AM, Gabriel Huau <contact at huau-gabriel.fr> wrote:
> A set of properties has been defined for the device tree to select for
> each pin the pull/func/default output configuration.
>
> The offset for the PAD needs to be provided and if a GPIO needs to be
> configured, his offset needs to be provided as well.
>
> Here is an example:
> pin_usb_host_en0 at 0 {
> gpio-offset = <0x80 8>;
> pad-offset = <0x260>;
> mode-gpio;
> output-value = <1>;
> direction = <PIN_OUTPUT>;
> };
>
> Signed-off-by: Gabriel Huau <contact at huau-gabriel.fr>
> ---
> arch/x86/dts/minnowmax.dts | 21 +++
> arch/x86/include/asm/arch-baytrail/gpio.h | 1 +
> arch/x86/include/asm/gpio.h | 1 +
> drivers/gpio/intel_ich6_gpio.c | 222 ++++++++++++++++++++++++++----
> include/dt-bindings/gpio/gpio.h | 20 +++
> 5 files changed, 239 insertions(+), 26 deletions(-)
>
> diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
> index c73e421..3936e21 100644
> --- a/arch/x86/dts/minnowmax.dts
> +++ b/arch/x86/dts/minnowmax.dts
> @@ -6,6 +6,8 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/gpio/gpio.h>
> +
> /include/ "skeleton.dtsi"
> /include/ "serial.dtsi"
>
> @@ -21,6 +23,25 @@
> silent_console = <0>;
> };
>
> + pch_pinctrl {
> + compatible = "intel,ich6-pinctrl";
I guess the prefix 'ich6' is debatable.
> + pin_usb_host_en0 at 0 {
> + gpio-offset = <0x80 8>;
> + pad-offset = <0x260>;
> + mode-gpio;
> + output-value = <1>;
> + direction = <PIN_OUTPUT>;
> + };
> +
> + pin_usb_host_en1 at 0 {
> + gpio-offset = <0x80 9>;
> + pad-offset = <0x258>;
> + mode-gpio;
> + output-value = <1>;
> + direction = <PIN_OUTPUT>;
> + };
> + };
> +
> gpioa {
> compatible = "intel,ich6-gpio";
> u-boot,dm-pre-reloc;
> diff --git a/arch/x86/include/asm/arch-baytrail/gpio.h b/arch/x86/include/asm/arch-baytrail/gpio.h
> index 4e8987c..85a65a8 100644
> --- a/arch/x86/include/asm/arch-baytrail/gpio.h
> +++ b/arch/x86/include/asm/arch-baytrail/gpio.h
> @@ -9,5 +9,6 @@
>
> /* Where in config space is the register that points to the GPIO registers? */
> #define PCI_CFG_GPIOBASE 0x48
> +#define PCI_CFG_IOBASE 0x4c
>
> #endif /* _X86_ARCH_GPIO_H_ */
> diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
> index 1099427..ed85b08 100644
> --- a/arch/x86/include/asm/gpio.h
> +++ b/arch/x86/include/asm/gpio.h
> @@ -147,6 +147,7 @@ struct pch_gpio_map {
> } set3;
> };
>
> +int gpio_ich6_pinctrl_init(void);
> void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio);
> void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
>
> diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
> index 7e679a0..a110d5b 100644
> --- a/drivers/gpio/intel_ich6_gpio.c
> +++ b/drivers/gpio/intel_ich6_gpio.c
> @@ -44,21 +44,32 @@ struct ich6_bank_priv {
> uint16_t lvl;
> };
>
> +#define GPIO_USESEL_OFFSET(x) (x)
> +#define GPIO_IOSEL_OFFSET(x) (x + 4)
> +#define GPIO_LVL_OFFSET(x) (x + 8)
>
> +#define IOPAD_MODE_MASK 0x7
> +#define IOPAD_PULL_ASSIGN_MASK 0x3
> +#define IOPAD_PULL_ASSIGN_SHIFT 7
> +#define IOPAD_PULL_STRENGTH_MASK 0x3
> +#define IOPAD_PULL_STRENGTH_SHIFT 9
> +
> +static int __ich6_gpio_set_value(uint16_t base, unsigned offset, int value);
> +static int __ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir);
> +static int __ich6_gpio_set_function(uint16_t base, unsigned offset, int func);
> +
> /* TODO: Move this to device tree, or platform data */
> void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
> {
> gd->arch.gpio_map = map;
> }
>
> -static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
> +static int gpio_ich6_get_base(unsigned long base)
> {
> - struct ich6_bank_platdata *plat = dev_get_platdata(dev);
> pci_dev_t pci_dev; /* handle for 0:1f:0 */
> u8 tmpbyte;
> u16 tmpword;
> u32 tmplong;
> - u16 gpiobase;
> - int offset;
>
> /* Where should it be? */
> pci_dev = PCI_BDF(0, 0x1f, 0);
> @@ -123,9 +134,9 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
> * while on the Ivybridge the bit0 is used to indicate it is an
> * I/O space.
> */
> - tmplong = x86_pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
> + tmplong = x86_pci_read_config32(pci_dev, base);
> if (tmplong == 0x00000000 || tmplong == 0xffffffff) {
> - debug("%s: unexpected GPIOBASE value\n", __func__);
> + debug("%s: unexpected BASE value\n", __func__);
> return -ENODEV;
> }
>
> @@ -135,7 +146,138 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
> * at the offset that we just read. Bit 0 indicates that it's
> * an I/O address, not a memory address, so mask that off.
> */
> - gpiobase = tmplong & 0xfffe;
> + return tmplong & 0xfffc;
> +}
> +
> +int gpio_ich6_pinctrl_init(void)
> +{
> + int pin_node;
> + int node;
> + u32 iobase;
> + u32 gpiobase;
> +
> + /*
> + * Get the memory/io base address to configure every pins.
> + * IOBASE is used to configure the mode/pads
> + * GPIOBASE is used to configure the direction and default value
> + */
> + iobase = gpio_ich6_get_base(PCI_CFG_IOBASE);
I believe this breaks other x86 boards as PCI_CFG_IOBASE is baytrail-specific.
> + if (iobase < 0) {
> + debug("%s: invalid IOBASE address (%08x)\n", __func__, iobase);
> + return -EINVAL;
> + }
> +
> + gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);
> + if (iobase < 0) {
> + debug("%s: invalid IOBASE address (%08x)\n", __func__, iobase);
> + return -EINVAL;
> + }
> +
> + /* This is not an error to not have a pinctrl node */
> + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
> + "intel,ich6-pinctrl");
> + if (node < 0)
> + return 0;
> +
> + for (pin_node = fdt_first_subnode(gd->fdt_blob, node);
> + pin_node > 0;
> + pin_node = fdt_next_subnode(gd->fdt_blob, pin_node)) {
> + u32 gpio_offset[2] = { -1, -1 };
> + u32 pad_offset;
> + u32 tmplong;
> + const void *tmpnode;
> +
> + /*
> + * The offset for the same pin for the IOBASE and GPIOBASE are
> + * different, so instead of maintaining a lookup table,
> + * the device tree should provide directly the correct
> + * value for both mapping.
> + */
> + pad_offset = fdtdec_get_int(gd->fdt_blob, pin_node,
> + "pad-offset", -1);
> + if (pad_offset == -1) {
> + debug("%s: Invalid register io offset %d\n",
> + __func__, pad_offset);
> + return -EINVAL;
> + }
> +
> + /*
> + * GPIO node is not mandatory, so we only do the
> + * pinmuxing if the node exist.
> + */
> + fdtdec_get_int_array(gd->fdt_blob, pin_node,
> + "gpio-offset", gpio_offset, 2);
> + if (gpio_offset[0] != -1) {
> + /* Do we want to force the GPIO mode? */
> + tmpnode = fdt_getprop(gd->fdt_blob, pin_node,
> + "mode-gpio", NULL);
> + if (tmpnode)
> + __ich6_gpio_set_function(GPIO_USESEL_OFFSET
> + (gpiobase) +
> + gpio_offset[0],
> + gpio_offset[1], 1);
> +
> + tmplong =
> + fdtdec_get_int(gd->fdt_blob, pin_node, "direction",
> + -1);
> + if (tmplong != -1)
> + __ich6_gpio_set_direction(GPIO_IOSEL_OFFSET
> + (gpiobase) +
> + gpio_offset[0],
> + gpio_offset[1],
> + tmplong);
> +
> + tmplong =
> + fdtdec_get_int(gd->fdt_blob, pin_node,
> + "output-value", -1);
> + if (tmplong != -1)
> + __ich6_gpio_set_value(GPIO_LVL_OFFSET(gpiobase)
> + + gpio_offset[0],
> + gpio_offset[1], tmplong);
> + }
> +
> + /*
> + * Do we need to set a specific function mode?
> + * If someone put also 'mode-gpio', this option will
> + * be just ignored by the controller
> + */
> + tmplong =
> + fdtdec_get_int(gd->fdt_blob, pin_node, "mode-func", -1);
> + if (tmplong != -1)
> + clrsetbits_le32(iobase + pad_offset, IOPAD_MODE_MASK,
> + tmplong);
> +
> + /* Configure the pull-up/down if needed */
> + tmplong =
> + fdtdec_get_int(gd->fdt_blob, pin_node, "pull-assign", -1);
> + if (tmplong != -1)
> + clrsetbits_le32(iobase + pad_offset,
> + IOPAD_PULL_ASSIGN_MASK <<
> + IOPAD_PULL_ASSIGN_SHIFT,
> + tmplong << IOPAD_PULL_ASSIGN_SHIFT);
> +
> + tmplong =
> + fdtdec_get_int(gd->fdt_blob, pin_node, "pull-strength", -1);
> + if (tmplong != -1)
> + clrsetbits_le32(iobase + pad_offset,
> + IOPAD_PULL_STRENGTH_MASK <<
> + IOPAD_PULL_STRENGTH_SHIFT,
> + tmplong << IOPAD_PULL_STRENGTH_SHIFT);
> +
> + debug("%s: pad cfg [0x%x]: %08x\n", __func__, pad_offset,
> + readl(iobase + pad_offset));
> + }
> +
> + return 0;
> +}
> +
> +static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct ich6_bank_platdata *plat = dev_get_platdata(dev);
> + u16 gpiobase;
> + int offset;
> +
> + gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);
> offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1);
> if (offset == -1) {
> debug("%s: Invalid register offset %d\n", __func__, offset);
> @@ -189,33 +331,56 @@ static int ich6_gpio_request(struct udevice *dev, unsigned offset,
> return 0;
> }
>
> -static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset)
> +static int __ich6_gpio_set_function(uint16_t base, unsigned offset, int func)
> {
> - struct ich6_bank_priv *bank = dev_get_priv(dev);
> u32 tmplong;
>
> - tmplong = inl(bank->io_sel);
> - tmplong |= (1UL << offset);
> - outl(bank->io_sel, tmplong);
> + if (func) {
> + tmplong = inl(base);
> + tmplong |= (1UL << offset);
> + outl(tmplong, base);
> + } else {
> + tmplong = inl(base);
> + tmplong &= ~(1UL << offset);
> + outl(tmplong, base);
> + }
> +
> return 0;
> }
>
> -static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
> - int value)
> +static int __ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir)
> {
> - struct ich6_bank_priv *bank = dev_get_priv(dev);
> u32 tmplong;
>
> - gpio_set_value(offset, value);
> + if (!dir) {
> + tmplong = inl(base);
> + tmplong |= (1UL << offset);
> + outl(tmplong, base);
> + } else {
> + tmplong = inl(base);
> + tmplong &= ~(1UL << offset);
> + outl(tmplong, base);
> + }
>
> - tmplong = inl(bank->io_sel);
> - tmplong &= ~(1UL << offset);
> - outl(bank->io_sel, tmplong);
> return 0;
> }
>
> -static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
> +static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset)
> +{
> + struct ich6_bank_priv *bank = dev_get_priv(dev);
> +
> + return __ich6_gpio_set_direction(inl(bank->io_sel), offset, 0);
> +}
> +
> +static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
> + int value)
> +{
> + struct ich6_bank_priv *bank = dev_get_priv(dev);
> +
> + return __ich6_gpio_set_direction(inl(bank->io_sel), offset, 1);
> +}
>
> +static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
> {
> struct ich6_bank_priv *bank = dev_get_priv(dev);
> u32 tmplong;
> @@ -226,21 +391,26 @@ static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
> return r;
> }
>
> -static int ich6_gpio_set_value(struct udevice *dev, unsigned offset,
> - int value)
> +static int __ich6_gpio_set_value(uint16_t base, unsigned offset, int value)
> {
> - struct ich6_bank_priv *bank = dev_get_priv(dev);
> u32 tmplong;
> -
> - tmplong = inl(bank->lvl);
> + tmplong = inl(base);
> if (value)
> tmplong |= (1UL << offset);
> else
> tmplong &= ~(1UL << offset);
> - outl(bank->lvl, tmplong);
> + outl(tmplong, base);
> +
> return 0;
> }
>
> +static int ich6_gpio_set_value(struct udevice *dev, unsigned offset,
> + int value)
> +{
> + struct ich6_bank_priv *bank = dev_get_priv(dev);
> + return __ich6_gpio_set_value(bank->lvl, offset, value);
> +}
> +
> static int ich6_gpio_get_function(struct udevice *dev, unsigned offset)
> {
> struct ich6_bank_priv *bank = dev_get_priv(dev);
> diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
> index e6b1e0a..49d437c 100644
> --- a/include/dt-bindings/gpio/gpio.h
> +++ b/include/dt-bindings/gpio/gpio.h
> @@ -12,4 +12,24 @@
> #define GPIO_ACTIVE_HIGH 0
> #define GPIO_ACTIVE_LOW 1
>
> +#define GPIO_MODE_NATIVE 0
> +#define GPIO_MODE_GPIO 1
> +
> +#define GPIO_MODE_FUNC0 0
> +#define GPIO_MODE_FUNC1 1
> +#define GPIO_MODE_FUNC2 2
> +#define GPIO_MODE_FUNC4 4
> +#define GPIO_MODE_FUNC5 5
> +#define GPIO_MODE_FUNC6 6
> +
> +#define PIN_INPUT 0
> +#define PIN_OUTPUT 1
> +
> +#define PIN_INPUT_NOPULL 0
> +#define PIN_INPUT_PULLUP 1
> +#define PIN_INPUT_PULLDOWN 2
> +
> +#define PULL_STR_2K 0
> +#define PULL_STR_20K 2
> +
> #endif
> --
Regards,
Bin
More information about the U-Boot
mailing list