[U-Boot] [PATCH 15/21] sunxi: emac: Add device model support
Hans de Goede
hdegoede at redhat.com
Fri Apr 24 15:48:24 CEST 2015
Modify the sunxi-emac eth driver to support device model.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/cpu/armv7/sunxi/board.c | 4 +-
drivers/net/sunxi_emac.c | 81 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 84 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 7e9cf11..cde13ef 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -12,7 +12,9 @@
#include <common.h>
#include <i2c.h>
+#ifndef CONFIG_DM_ETH
#include <netdev.h>
+#endif
#include <miiphy.h>
#include <serial.h>
#ifdef CONFIG_SPL_BUILD
@@ -224,7 +226,7 @@ int cpu_eth_init(bd_t *bis)
mdelay(200);
#endif
-#ifdef CONFIG_SUNXI_EMAC
+#if defined CONFIG_SUNXI_EMAC && !defined CONFIG_DM_ETH
rc = sunxi_emac_initialize(bis);
if (rc < 0) {
printf("sunxi: failed to initialize emac\n");
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index 038f474..a9efe11 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -7,6 +7,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <linux/err.h>
#include <malloc.h>
#include <miiphy.h>
@@ -160,6 +161,9 @@ struct emac_eth_dev {
struct mii_dev *bus;
struct phy_device *phydev;
int link_printed;
+#ifdef CONFIG_DM_ETH
+ uchar rx_buf[DMA_CPU_TRRESHOLD];
+#endif
};
struct emac_rxhdr {
@@ -509,6 +513,7 @@ static void sunxi_emac_board_setup(struct emac_eth_dev *priv)
clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2);
}
+#ifndef CONFIG_DM_ETH
static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bis)
{
return _sunxi_emac_eth_init(dev->priv, dev->enetaddr);
@@ -573,3 +578,79 @@ int sunxi_emac_initialize(void)
return sunxi_emac_init_phy(priv, dev);
}
+#endif
+
+#ifdef CONFIG_DM_ETH
+static int sunxi_emac_eth_start(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+
+ return _sunxi_emac_eth_init(dev->priv, pdata->enetaddr);
+}
+
+static int sunxi_emac_eth_send(struct udevice *dev, void *packet, int length)
+{
+ struct emac_eth_dev *priv = dev_get_priv(dev);
+
+ return _sunxi_emac_eth_send(priv, packet, length);
+}
+
+static int sunxi_emac_eth_recv(struct udevice *dev, uchar **packetp)
+{
+ struct emac_eth_dev *priv = dev_get_priv(dev);
+ int rx_len;
+
+ rx_len = _sunxi_emac_eth_recv(priv, priv->rx_buf);
+ *packetp = priv->rx_buf;
+
+ return rx_len;
+}
+
+static void sunxi_emac_eth_stop(struct udevice *dev)
+{
+ /* Nothing to do here */
+}
+
+static int sunxi_emac_eth_probe(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct emac_eth_dev *priv = dev_get_priv(dev);
+
+ priv->regs = (struct emac_regs *)pdata->iobase;
+ sunxi_emac_board_setup(priv);
+
+ return sunxi_emac_init_phy(priv, dev);
+}
+
+static const struct eth_ops sunxi_emac_eth_ops = {
+ .start = sunxi_emac_eth_start,
+ .send = sunxi_emac_eth_send,
+ .recv = sunxi_emac_eth_recv,
+ .stop = sunxi_emac_eth_stop,
+};
+
+static int sunxi_emac_eth_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+
+ pdata->iobase = dev_get_addr(dev);
+
+ return 0;
+}
+
+static const struct udevice_id sunxi_emac_eth_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-emac" },
+ { }
+};
+
+U_BOOT_DRIVER(eth_sunxi_emac) = {
+ .name = "eth_sunxi_emac",
+ .id = UCLASS_ETH,
+ .of_match = sunxi_emac_eth_ids,
+ .ofdata_to_platdata = sunxi_emac_eth_ofdata_to_platdata,
+ .probe = sunxi_emac_eth_probe,
+ .ops = &sunxi_emac_eth_ops,
+ .priv_auto_alloc_size = sizeof(struct emac_eth_dev),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
+#endif
--
2.3.5
More information about the U-Boot
mailing list