[U-Boot] [PATCH 1/8] armv8/fsl-lsch3: Add Freescale Debug Server driver

[York Sun]

On 03/19/2015 09:20 AM, York Sun wrote:
> From: Bhupesh Sharma <bhupesh.sharma at freescale.com>
> 
> The Debug Server driver is responsible for loading the Debug
> server FW on the Service Processor (Cortex-A5 core) on LS2085A like
> SoCs and then polling for the successful initialization of the same.
> TOP MEM HIDE is adjusted to ensure the space required by Debug Server
> FW is accounted for. MC uses the DDR area which is calculated as:
> 
> MC DDR region start = Top of DDR - area reserved by Debug Server FW
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
> ---
This set is to fsl-qoriq master, awaiting upstream.

[U-Boot,1/8] armv8/fsl-lsch3: Add Freescale Debug Server driver
[U-Boot,2/8] fsl-ch3/README: Add description for NOR flash layout (firmware images)
[U-Boot,3/8] driver/fsl-mc: Add support of MC Flibs
[U-Boot,4/8] driver/ldpaa_eth: Add LDPAA Ethernet driver
[U-Boot,5/8] board/ls2085_common: Increase malloc length
[U-Boot,6/8] driver/fsl_ifc: Add support to finalize CS1, CS3 address binding
[U-Boot,7/8] nand/fsl_ifc: Increase eccstat[] for IFC 2.0
[U-Boot,v2,8/8] driver/i2c/mxc: Enable I2C bus 3 and 4

York