[U-Boot] [PATCH 14/21] sunxi: emac: Prepare for device-model support
Hans de Goede
hdegoede at redhat.com
Fri Apr 24 15:48:23 CEST 2015
Split all the core functionality out into functions taking a
struct emac_eth_dev *priv argument as preparation for adding device-model
support.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
drivers/net/sunxi_emac.c | 115 +++++++++++++++++++++++++++++------------------
1 file changed, 71 insertions(+), 44 deletions(-)
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index b9fd1b8..038f474 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -309,9 +309,9 @@ static void emac_setup(struct emac_eth_dev *priv)
writel(EMAC_MAC_MFL, ®s->mac_maxf);
}
-static void emac_reset(struct eth_device *dev)
+static void emac_reset(struct emac_eth_dev *priv)
{
- struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+ struct emac_regs *regs = priv->regs;
debug("resetting device\n");
@@ -323,10 +323,9 @@ static void emac_reset(struct eth_device *dev)
udelay(200);
}
-static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
+static int _sunxi_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr)
{
- struct emac_regs *regs = (struct emac_regs *)dev->iobase;
- struct emac_eth_dev *priv = dev->priv;
+ struct emac_regs *regs = priv->regs;
int ret;
/* Init EMAC */
@@ -347,14 +346,14 @@ static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
/* Set up EMAC */
emac_setup(priv);
- writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
- dev->enetaddr[2], ®s->mac_a1);
- writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
- dev->enetaddr[5], ®s->mac_a0);
+ writel(enetaddr[0] << 16 | enetaddr[1] << 8 | enetaddr[2],
+ ®s->mac_a1);
+ writel(enetaddr[3] << 16 | enetaddr[4] << 8 | enetaddr[5],
+ ®s->mac_a0);
mdelay(1);
- emac_reset(dev);
+ emac_reset(priv);
/* PHY POWER UP */
ret = phy_startup(priv->phydev);
@@ -390,14 +389,9 @@ static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
return 0;
}
-static void sunxi_emac_eth_halt(struct eth_device *dev)
+static int _sunxi_emac_eth_recv(struct emac_eth_dev *priv, void *packet)
{
- /* Nothing to do here */
-}
-
-static int sunxi_emac_eth_recv(struct eth_device *dev)
-{
- struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+ struct emac_regs *regs = priv->regs;
struct emac_rxhdr rxhdr;
u32 rxcount;
u32 reg_val;
@@ -415,7 +409,7 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
/* Had one stuck? */
rxcount = readl(®s->rx_fbc);
if (!rxcount)
- return 0;
+ return -EAGAIN;
}
reg_val = readl(®s->rx_io_data);
@@ -431,7 +425,7 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
/* Enable RX */
setbits_le32(®s->ctl, 0x1 << 2);
- return 0;
+ return -EAGAIN;
}
/* A packet ready now
@@ -463,22 +457,19 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
if (good_packet) {
if (rx_len > DMA_CPU_TRRESHOLD) {
printf("Received packet is too big (len=%d)\n", rx_len);
- } else {
- emac_inblk_32bit((void *)®s->rx_io_data,
- net_rx_packets[0], rx_len);
-
- /* Pass to upper layer */
- net_process_received_packet(net_rx_packets[0], rx_len);
- return rx_len;
+ return -EMSGSIZE;
}
+ emac_inblk_32bit((void *)®s->rx_io_data, packet, rx_len);
+ return rx_len;
}
- return 0;
+ return -EIO; /* Bad packet */
}
-static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
+static int _sunxi_emac_eth_send(struct emac_eth_dev *priv, void *packet,
+ int len)
{
- struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+ struct emac_regs *regs = priv->regs;
/* Select channel 0 */
writel(0, ®s->tx_ins);
@@ -495,17 +486,64 @@ static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
return 0;
}
-int sunxi_emac_initialize(void)
+static void sunxi_emac_board_setup(struct emac_eth_dev *priv)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_sramc_regs *sram =
(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
+ struct emac_regs *regs = priv->regs;
+ int pin;
+
+ /* Map SRAM to EMAC */
+ setbits_le32(&sram->ctrl1, 0x5 << 2);
+
+ /* Configure pin mux settings for MII Ethernet */
+ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
+
+ /* Set up clock gating */
+ setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
+
+ /* Set MII clock */
+ clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2);
+}
+
+static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bis)
+{
+ return _sunxi_emac_eth_init(dev->priv, dev->enetaddr);
+}
+
+static void sunxi_emac_eth_halt(struct eth_device *dev)
+{
+ /* Nothing to do here */
+}
+
+static int sunxi_emac_eth_recv(struct eth_device *dev)
+{
+ int rx_len;
+
+ rx_len = _sunxi_emac_eth_recv(dev->priv, net_rx_packets[0]);
+ if (rx_len <= 0)
+ return 0;
+
+ /* Pass to upper layer */
+ net_process_received_packet(net_rx_packets[0], rx_len);
+
+ return rx_len;
+}
+
+static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int length)
+{
+ return _sunxi_emac_eth_send(dev->priv, packet, length);
+}
+
+int sunxi_emac_initialize(void)
+{
struct emac_regs *regs =
(struct emac_regs *)SUNXI_EMAC_BASE;
struct eth_device *dev;
struct emac_eth_dev *priv;
- int pin;
dev = malloc(sizeof(*dev));
if (dev == NULL)
@@ -520,19 +558,6 @@ int sunxi_emac_initialize(void)
memset(dev, 0, sizeof(*dev));
memset(priv, 0, sizeof(struct emac_eth_dev));
- /* Map SRAM to EMAC */
- setbits_le32(&sram->ctrl1, 0x5 << 2);
-
- /* Configure pin mux settings for MII Ethernet */
- for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
-
- /* Set up clock gating */
- setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
-
- /* Set MII clock */
- clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2);
-
priv->regs = regs;
dev->iobase = (int)regs;
dev->priv = priv;
@@ -542,6 +567,8 @@ int sunxi_emac_initialize(void)
dev->recv = sunxi_emac_eth_recv;
strcpy(dev->name, "emac");
+ sunxi_emac_board_setup(priv);
+
eth_register(dev);
return sunxi_emac_init_phy(priv, dev);
--
2.3.5
More information about the U-Boot
mailing list