[U-Boot] [PATCH v2 3/4] x86: Support platform PIRQ routing
Bin Meng
bmeng.cn at gmail.com
Fri Apr 24 12:10:05 CEST 2015
On x86 boards, platform chipset receives up to four different
interrupt signals from PCI devices (INTA/B/C/D), which in turn
will be routed to chipset internal PIRQ lines then routed to
8259 PIC finally if configuring the whole system to work under
the so-called PIC mode (in contrast to symmetric IO mode which
uses IOAPIC).
We add two major APIs to aid this, one for routing PIRQ and the
other one for generating a PIRQ routing table.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
arch/x86/Kconfig | 31 ++++++++
arch/x86/include/asm/pirq_routing.h | 139 ++++++++++++++++++++++++++++++++++++
arch/x86/lib/Makefile | 1 +
arch/x86/lib/pirq_routing.c | 129 +++++++++++++++++++++++++++++++++
4 files changed, 300 insertions(+)
create mode 100644 arch/x86/include/asm/pirq_routing.h
create mode 100644 arch/x86/lib/pirq_routing.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3f1401a..aaceaef 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -442,6 +442,37 @@ config TSC_FREQ_IN_MHZ
help
The running frequency in MHz of Time-Stamp Counter (TSC).
+menu "System tables"
+
+config GENERATE_PIRQ_TABLE
+ bool "Generate a PIRQ table"
+ default n
+ help
+ Generate a PIRQ routing table for this board. The PIRQ routing table
+ is generated by U-Boot in the system memory from 0xf0000 to 0xfffff
+ at every 16-byte boundary with a PCI IRQ routing signature ("$PIR").
+ It specifies the interrupt router information as well how all the PCI
+ devices' interrupt pins are wired to PIRQs.
+
+endmenu
+
+config MAX_PIRQ_LINKS
+ int
+ default 8
+ help
+ This variable specifies the number of PIRQ interrupt links which are
+ routable. On most older chipsets, this is 4, PIRQA through PIRQD.
+ Some newer chipsets offer more than four links, commonly up to PIRQH.
+
+config IRQ_SLOT_COUNT
+ int
+ default 128
+ help
+ U-Boot can support up to 254 IRQ slot info in the PIRQ routing table
+ which in turns forms a table of exact 4KiB. The default value 128
+ should be enough for most boards. If this does not fit your board,
+ change it according to your needs.
+
source "board/coreboot/coreboot/Kconfig"
source "board/google/chromebook_link/Kconfig"
diff --git a/arch/x86/include/asm/pirq_routing.h b/arch/x86/include/asm/pirq_routing.h
new file mode 100644
index 0000000..ddc08e1
--- /dev/null
+++ b/arch/x86/include/asm/pirq_routing.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * Ported from coreboot src/arch/x86/include/arch/pirq_routing.h
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PIRQ_ROUTING_H_
+#define _PIRQ_ROUTING_H_
+
+/*
+ * This is the maximum number on interrupt entries that a PCI device may have.
+ * This is NOT the number of slots or devices in the system
+ * This is NOT the number of entries in the PIRQ table
+ *
+ * This tells us that in the PIRQ table, we are going to have 4 link-bitmap
+ * entries per PCI device which is fixed at 4: INTA, INTB, INTC, and INTD.
+ *
+ * CAUTION: If you change this, PIRQ routing will not work correctly.
+ */
+#define MAX_INTX_ENTRIES 4
+
+#define PIRQ_SIGNATURE \
+ (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
+#define PIRQ_VERSION 0x0100
+
+struct __packed irq_info {
+ u8 bus; /* Bus number */
+ u8 devfn; /* Device and function number */
+ struct __packed {
+ u8 link; /* IRQ line ID, 0=not routed */
+ u16 bitmap; /* Available IRQs */
+ } irq[MAX_INTX_ENTRIES];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+};
+
+struct __packed irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus; /* busno of the interrupt router */
+ u8 rtr_devfn; /* devfn of the interrupt router */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
+ u16 rtr_vendor; /* Vendor ID of the interrupt router */
+ u16 rtr_device; /* Device ID of the interrupt router */
+ u32 miniport_data;
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give zero */
+ struct irq_info slots[CONFIG_IRQ_SLOT_COUNT];
+};
+
+/**
+ * get_irq_slot_count() - Get the number of entries in the irq_info table
+ *
+ * This calculates the number of entries for the irq_info table.
+ *
+ * @rt: pointer to the base address of the struct irq_info
+ * @return: number of entries
+ */
+static inline int get_irq_slot_count(struct irq_routing_table *rt)
+{
+ return (rt->size - 32) / sizeof(struct irq_info);
+}
+
+/**
+ * pirq_check_irq_routed() - Check whether an IRQ is routed to 8259 PIC
+ *
+ * This function checks whether an IRQ is routed to 8259 PIC for a given link.
+ *
+ * Note: this function should be provided by the platform codes, as the
+ * implementation of interrupt router may be different.
+ *
+ * @link: link number which represents a PIRQ
+ * @irq: the 8259 IRQ number
+ * @return: true if the irq is already routed to 8259 for a given link,
+ * false elsewise
+ */
+bool pirq_check_irq_routed(int link, u8 irq);
+
+/**
+ * pirq_translate_link() - Translate a link value
+ *
+ * This function translates a platform-specific link value to a link number.
+ * On Intel platforms, the link value is normally a offset into the PCI
+ * configuration space into the legacy bridge.
+ *
+ * Note: this function should be provided by the platform codes, as the
+ * implementation of interrupt router may be different.
+ *
+ * @link: platform-specific link value
+ * @return: link number which represents a PIRQ
+ */
+int pirq_translate_link(int link);
+
+/**
+ * pirq_assign_irq() - Assign an IRQ to a PIRQ link
+ *
+ * This function assigns the IRQ to a PIRQ link so that the PIRQ is routed to
+ * the 8259 PIC.
+ *
+ * Note: this function should be provided by the platform codes, as the
+ * implementation of interrupt router may be different.
+ *
+ * @link: link number which represents a PIRQ
+ * @irq: IRQ to which the PIRQ is routed
+ */
+void pirq_assign_irq(int link, u8 irq);
+
+/**
+ * pirq_route_irqs() - Route PIRQs to 8259 PIC
+ *
+ * This function configures all PCI devices' interrupt pins and maps them to
+ * PIRQs and finally 8259 PIC. The routed irq number is written to interrupt
+ * line register in the configuration space of the PCI device for OS to use.
+ * The configuration source is taken from a struct irq_info table, the format
+ * of which is defined in PIRQ routing table spec and PCI BIOS spec.
+ *
+ * @irq: pointer to the base address of the struct irq_info
+ * @num: number of entries in the struct irq_info
+ */
+void pirq_route_irqs(struct irq_info *irq, int num);
+
+/**
+ * copy_pirq_routing_table() - Copy a PIRQ routing table
+ *
+ * This helper function copies the given PIRQ routing table to a given address.
+ * Before copying, it does several sanity tests against the PIRQ routing table.
+ * It also fixes up the table checksum and align the given address to a 16 byte
+ * boundary to meet the PIRQ routing table spec requirements.
+ *
+ * @addr: address to store the copied PIRQ routing table
+ * @rt: pointer to the PIRQ routing table to copy from
+ * @return: end address of the copied PIRQ routing table
+ */
+u32 copy_pirq_routing_table(u32 addr, struct irq_routing_table *rt);
+
+#endif /* _PIRQ_ROUTING_H_ */
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 0de0d89..0178fe1 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -22,6 +22,7 @@ ifndef CONFIG_DM_PCI
obj-$(CONFIG_PCI) += pci_type1.o
endif
obj-y += pch-uclass.o
+obj-y += pirq_routing.o
obj-y += relocate.o
obj-y += physmem.o
obj-$(CONFIG_X86_RAMTEST) += ramtest.o
diff --git a/arch/x86/lib/pirq_routing.c b/arch/x86/lib/pirq_routing.c
new file mode 100644
index 0000000..5a2591a
--- /dev/null
+++ b/arch/x86/lib/pirq_routing.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * Part of this file is ported from coreboot src/arch/x86/boot/pirq_routing.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+#include <asm/pirq_routing.h>
+#include <asm/tables.h>
+
+static bool irq_already_routed[16];
+
+static u8 pirq_get_next_free_irq(u8 *pirq, u16 bitmap)
+{
+ int i, link;
+ u8 irq = 0;
+
+ /* IRQ sharing starts from IRQ#3 */
+ for (i = 3; i < 16; i++) {
+ /* Can we assign this IRQ? */
+ if (!((bitmap >> i) & 1))
+ continue;
+
+ /* We can, now let's assume we can use this IRQ */
+ irq = i;
+
+ /* Have we already routed it? */
+ if (irq_already_routed[irq])
+ continue;
+
+ for (link = 0; link < CONFIG_MAX_PIRQ_LINKS; link++) {
+ if (pirq_check_irq_routed(link, irq)) {
+ irq_already_routed[irq] = true;
+ break;
+ }
+ }
+
+ /* If it's not yet routed, use it */
+ if (!irq_already_routed[irq]) {
+ irq_already_routed[irq] = true;
+ break;
+ }
+
+ /* But if it was already routed, try the next one */
+ }
+
+ /* Now we get our IRQ */
+ return irq;
+}
+
+void pirq_route_irqs(struct irq_info *irq, int num)
+{
+ unsigned char irq_slot[MAX_INTX_ENTRIES];
+ unsigned char pirq[CONFIG_MAX_PIRQ_LINKS];
+ int i, intx;
+
+ memset(pirq, 0, CONFIG_MAX_PIRQ_LINKS);
+
+ /* Set PCI IRQs */
+ for (i = 0; i < num; i++) {
+ debug("PIRQ Entry %d Dev: %d.%x.%d\n", i,
+ irq->bus, irq->devfn >> 3, irq->devfn & 7);
+
+ for (intx = 0; intx < MAX_INTX_ENTRIES; intx++) {
+ int link = irq->irq[intx].link;
+ int bitmap = irq->irq[intx].bitmap;
+ int irq = 0;
+
+ debug("INT%c link: %x bitmap: %x ",
+ 'A' + intx, link, bitmap);
+
+ if (!bitmap || !link) {
+ debug("not routed\n");
+ irq_slot[intx] = irq;
+ continue;
+ }
+
+ /* translate link value to link number */
+ link = pirq_translate_link(link);
+
+ /* yet not routed */
+ if (!pirq[link]) {
+ irq = pirq_get_next_free_irq(pirq, bitmap);
+ pirq[link] = irq;
+ } else {
+ irq = pirq[link];
+ }
+
+ debug("IRQ: %d\n", irq);
+ irq_slot[intx] = irq;
+
+ /* Assign IRQ in the interrupt router */
+ pirq_assign_irq(link, irq);
+ }
+
+ /* Bus, device, slots IRQs for {A,B,C,D} */
+ pci_assign_irqs(irq->bus, irq->devfn >> 3, irq->devfn & 7,
+ irq_slot);
+
+ irq++;
+ }
+
+ for (i = 0; i < CONFIG_MAX_PIRQ_LINKS; i++)
+ debug("PIRQ%c: %d\n", 'A' + i, pirq[i]);
+}
+
+u32 copy_pirq_routing_table(u32 addr, struct irq_routing_table *rt)
+{
+ if (rt->signature != PIRQ_SIGNATURE || rt->version != PIRQ_VERSION ||
+ rt->size % 16) {
+ debug("Interrupt Routing Table not valid\n");
+ return addr;
+ }
+
+ /* Fix up the table checksum */
+ rt->checksum = table_compute_checksum(rt, rt->size);
+
+ /* Align the table to be 16 byte aligned */
+ addr = ALIGN(addr, 16);
+
+ debug("Copying Interrupt Routing Table to 0x%x\n", addr);
+ memcpy((void *)addr, rt, rt->size);
+
+ return addr + rt->size;
+}
--
1.8.2.1
More information about the U-Boot
mailing list