[U-Boot] [PATCH v4 6/6] mx6cuboxi: Load the correct 'fdtfile' variable

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Instead of hardcoding the 'fdtfile' variable, let's detect the SoC and
board variant on the fly and change the dtb name.

Based on the scheme done on am335x board.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v3:
- Based on the scheme done on am335x board as per Tom Rini's suggestion

 board/solidrun/mx6cuboxi/mx6cuboxi.c | 25 +++++++++++++++++++++++++
 include/configs/mx6cuboxi.h          | 19 ++++++++++++++++---
 2 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 83410b2..e06186e 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -212,6 +212,31 @@ int checkboard(void)
 	return 0;
 }
 
+static bool is_mx6q(void)
+{
+	if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+		return true;
+	else
+		return false;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	if (is_hummingboard())
+		setenv("board_name", "HUMMINGBOARD");
+	else
+		setenv("board_name", "CUBOXI");
+
+	if (is_mx6q)
+		setenv("board_rev", "MX6Q");
+	else
+		setenv("board_rev", "MX6DL");
+#endif
+
+	return 0;
+}
+
 #ifdef CONFIG_SPL_BUILD
 #include <asm/arch/mx6-ddr.h>
 static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = {
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index bc7c577..32e0e5e 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -29,6 +29,7 @@
 
 #define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART
 #define CONFIG_CMD_FUSE
@@ -81,14 +82,14 @@
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONSOLE_DEV	"ttymxc0"
 #define CONFIG_MMCROOT		"/dev/mmcblk0p2"
-#define CONFIG_DEFAULT_FDT_FILE	"imx6q-hummingboard.dtb"
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #define CONFIG_SYS_MMC_ENV_DEV		0	/* SDHC2 */
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
-	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdtfile=undefined\0" \
 	"fdtaddr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
@@ -156,9 +157,21 @@
 			"fi; " \
 		"else " \
 			"bootz; " \
-		"fi;\0"
+		"fi;\0" \
+	"findfdt="\
+		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
+		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
+		"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
+		"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
+		"if test $fdtfile = undefined; then " \
+			"echo WARNING: Could not determine dtb to use; fi; \0" \
 
 #define CONFIG_BOOTCOMMAND \
+	"run findfdt; " \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
 		"if run loadbootscript; then " \
-- 
1.9.1