[U-Boot] [PATCH 2/6] sunxi: usb: Remove sunxi_usbc_get_io_base function
Hans de Goede
hdegoede at redhat.com
Tue Apr 28 08:41:07 CEST 2015
This is the only function left in sunxi/usbc.c which is not phy related,
so remove it.
This is a preparation patch for turning the usbc.c code into a proper
usb phy driver.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/cpu/armv7/sunxi/usbc.c | 30 ++++++++++--------------------
arch/arm/include/asm/arch-sunxi/usbc.h | 1 -
drivers/usb/host/ehci-sunxi.c | 5 ++++-
3 files changed, 14 insertions(+), 22 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/usbc.c b/arch/arm/cpu/armv7/sunxi/usbc.c
index 6ae6dfa..131e103 100644
--- a/arch/arm/cpu/armv7/sunxi/usbc.c
+++ b/arch/arm/cpu/armv7/sunxi/usbc.c
@@ -66,20 +66,6 @@ static struct sunxi_usbc_hcd {
static int enabled_hcd_count;
-void *sunxi_usbc_get_io_base(int index)
-{
- switch (index) {
- case 0:
- return (void *)SUNXI_USB0_BASE;
- case 1:
- return (void *)SUNXI_USB1_BASE;
- case 2:
- return (void *)SUNXI_USB2_BASE;
- default:
- return NULL;
- }
-}
-
static int get_vbus_gpio(int index)
{
switch (index) {
@@ -102,7 +88,7 @@ static void usb_phy_write(struct sunxi_usbc_hcd *sunxi_usbc, int addr,
int data, int len)
{
int j = 0, usbc_bit = 0;
- void *dest = sunxi_usbc_get_io_base(0) + SUNXI_USB_CSR;
+ void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
#ifdef CONFIG_MACH_SUN8I_A33
/* CSR needs to be explicitly initialized to 0 on A33 */
@@ -153,11 +139,15 @@ static void sunxi_usb_phy_init(struct sunxi_usbc_hcd *sunxi_usbc)
return;
}
-static void sunxi_usb_passby(struct sunxi_usbc_hcd *sunxi_usbc, int enable)
+static void sunxi_usb_phy_passby(int index, int enable)
{
unsigned long bits = 0;
- void *addr = sunxi_usbc_get_io_base(sunxi_usbc->id) +
- SUNXI_USB_PMU_IRQ_ENABLE;
+ void *addr;
+
+ if (index == 1)
+ addr = (void *)SUNXI_USB1_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
+ else
+ addr = (void *)SUNXI_USB2_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
bits = SUNXI_EHCI_AHB_ICHR8_EN |
SUNXI_EHCI_AHB_INCR4_BURST_EN |
@@ -227,7 +217,7 @@ void sunxi_usbc_enable(int index)
sunxi_usb_phy_init(sunxi_usbc);
if (sunxi_usbc->id != 0)
- sunxi_usb_passby(sunxi_usbc, SUNXI_USB_PASSBY_EN);
+ sunxi_usb_phy_passby(index, SUNXI_USB_PASSBY_EN);
enabled_hcd_count++;
}
@@ -238,7 +228,7 @@ void sunxi_usbc_disable(int index)
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (sunxi_usbc->id != 0)
- sunxi_usb_passby(sunxi_usbc, !SUNXI_USB_PASSBY_EN);
+ sunxi_usb_phy_passby(index, !SUNXI_USB_PASSBY_EN);
clrbits_le32(&ccm->usb_clk_cfg, sunxi_usbc->usb_rst_mask);
diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h
index ab0f272..41721f9 100644
--- a/arch/arm/include/asm/arch-sunxi/usbc.h
+++ b/arch/arm/include/asm/arch-sunxi/usbc.h
@@ -13,7 +13,6 @@
extern const struct musb_platform_ops sunxi_musb_ops;
-void *sunxi_usbc_get_io_base(int index);
int sunxi_usbc_request_resources(int index);
int sunxi_usbc_free_resources(int index);
void sunxi_usbc_enable(int index);
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 41e4d7f..5de20f9 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -35,7 +35,10 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
sunxi_usbc_enable(index + 1);
sunxi_usbc_vbus_enable(index + 1);
- *hccr = sunxi_usbc_get_io_base(index + 1);
+ if (index == 0)
+ *hccr = (void *)SUNXI_USB1_BASE;
+ else
+ *hccr = (void *)SUNXI_USB2_BASE;
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
--
2.3.5
More information about the U-Boot
mailing list